Statistics

254,993 members
132,753 posts
  • New
    RobertKelly
    Contributor - Level 1
    2021-07-30

    Hi - Can you suggest a simple solution if I want to use a DP48 for a personal monitor rig when i can mix my keyboards, 3 vocalists and a few other mics? I am now using a P16M with an XR18 which works well but I would like the recording capabilities, the dual mix output and the reverb that the DP48 provides. 

     

    Thanks!

    Rob

    read more...
    0 31
    • RobertKelly
      RexBeckett Hi Robert, the DP48 requires an AES50 feed (48 bi-directional channels) but the XR18 only has an Ultranet (16 channel) output which is not compatible. There is no simple way to convert Ultranet to AES50.

      I suggest that you replace the XR18 with an X32 Rack which supports both AES50 and Ultranet.
      • Jul 31
  • New
    richiejamesdj
    Newcomer - Level 1
    2021-07-27

    Hi there, I have recently purchased a perform VK and had two questions that dont seem to be answered from the manual.

    1. I am a little confused as to whether I need to connect my keyboard (Yamaha SX700) to the instrument inputs of the VK as well as the midi cable? Or is just one of those methods required and which is recommended?

    The concern I have with conmecting the keyboard to the Insturment inputs then out to my mixer/PA it means I have both mic and keyboard mixes going into one channel losing some flexibility in controlling mic volume during performance.

    2. I have really never used midi so wondering if I just use a midi cable to connect my keyboard to my VK, should it just work in terms of recognising chords played on the keyboard and creating appropriate harmonies or will I likely need tp adjust some midi settings on the keyboard first to make this work?

    Many thanks in advance for any answers.

    Regards, Richard

    read more...
    0 40
    • richiejamesdj
      RobbyWingfield HI Richie, Robby with Music Tribe here. You can send MIDI from your keyboard and as long as it is transmitting on the same MIDI channel as the VK you will be all set. Most devices will default to MIDI CH 1 this is the default of the VK as well. This video will show MIDI controlled harmonies. I've marked it right where she begins showing the effect in practice. I would suggest taking some time and watching the whole playlist that this video is from. It's really helpful!

      https://youtu.be/bBQL0z8EiQU?t=308
      • Jul 30
  • New
    RobertSmoughton
    Newcomer - Level 1
    2021-07-29

    Hello. 

    Just recently acquired the Perform VK to create harmonies live from a vocal. 

    However, ideally I'd like to use this as a send from our mixer so that it can be fed with different singer's vocals depending on the song. I want to keep the dry signal separate and only have the Perform VK output the harmonised result. 

    Is there a Harmony mix level setting? Can this be controlled via a Midi CC? Is there a dry signal level that I can mute or set at zero? Also can this be controlled by midi CC?

    Cheers

     

     

    read more...
    0 31
    • RobertSmoughton
      RobbyWingfield Hi Robert, this is Robby from Music Tribe. Unfortunately, the Perform VK does not have the ability to reduce the Dry output to zero or to engage a "kill dry" setting.
      • Jul 30
  • New
    ronlosangeles
    Contributor - Level 2
    2021-07-05

    Example:

    I'm using Pro Tools.  All is good with 404.

    I close PT.

     

    I open ZOOM to start a meeting.  Zoom does not "connect" to 404.

    Or I open Itunes.    No Audio.  Itunes does not connect to 404.

     

    Every time I switch programs (Itunes, Adobe Premiere, PT, Zoom) that I'm using.... I have to re-boot my computer.

    Then if I open zoom (or other program) the 404 works.

     

    Then if I try to go to another audio-using software (Itunes).... there's no audio.  I have to re-boot again.

    Help?

    Thanks in advance.

    read more...
    0 43
    • ronlosangeles
      RobbyWingfield HI Ron, Robby with Music Tribe here, please check your Windows sound settings that you do not have "exclusive mode" enabled.
      • Jul 29
  • New
    CindyDoire
    Newcomer - Level 1
    2021-07-26
    1. Hi everyone,

    i don't have much experience working with midi, and I bought the TC helicon perform VE used, and I'm having issues connectibg it to my midi keyboard (Yamaha reface Cp).

    I'm wondering if I'm just missing something? Am I using the wrong keyboard? Should the pedal connect to something else, or is the keyboard the only connection it needs to create vocal samples into midi ane use it with the keyboard? 

    Also, perhaps I've connected it wrong?

    It seems like this should be an easy pedal to use, so there's also the option that the midi in is damaged... 

    read more...
    0 39
    • CindyDoire
      RobbyWingfield Hi Cindy, Robby Wingfield with Music Tribe here, there are a few things here that would be better served directly over email. Could you please open a support ticket above? Someone will help you get your device setup and working correctly, Thanks!
      • Jul 29
  • New
    munchy1
    Newcomer - Level 1
    2021-07-29

    Any thoughts on a supertramp style vocal set-up. Thanks in advance.

     

    0 59
  • New
    cautrindade62
    Newcomer - Level 1
    2021-07-16

    Can I use the pedal as a volume pedal at the same time it is connected to an effect pedal thru the expression pedal output and switch to either volume or expression ?

    Considering both are connected at the same time, if I will press to change my effect using the expression, the volume will also change. I don't want that.

     

    I've sent attached, the scheme I want to use. The tremolo has an exp input, so I can control the intensity.

    read more...
    0 31
    • cautrindade62
      DavidKnighton Hello cautrindade62,
      I don't believe the pedal is switchable like you want/need it to be. The volume adjustment passes through the pedal and a built-in potentiometer that is controlled through the motion of the pedal. There's no way to bypass this in favor of EXP output.
      • Jul 27
    • cautrindade62
      cautrindade62

      Thank you David ! This could be a nice feature. A bypass switch !

      • Jul 27
  • New
    MaxResonant
    Newcomer - Level 1
    2021-07-19

    What's the USB Port for - the manual says "when connected to computer it shopws up as a class-compliant USB MIDI Device capable of supporting MIDI in & out." - is there a save function for the patches I create other than the patch notes at the end of the manual??

    read more...
    0 40
    • MaxResonant
      DavidKnighton Hello MaxResonant,
      I'm not sure what product you're speaking of, but if it's a Behringer synth, the USB port will serve a few purposes. Firstly, some synths will have software upgrades available, as well as some real time software enabled settings. These can all be appropriated using the USB connection. Secondly, the USB MIDI can be used to trigger the synth from software, such as Ableton, Logic, Pro Tools, Etc. You could essentially record MIDI tracks and have it play the notes through the synth, much to the effect of a sequencer. This is very useful if you're a solo artist and you want to utilize multiple synths at once. Saving presets is unfortunately not supported, as the majority of controls for these synths are all analog potentiometers and not digital rotary encoders.
      • Jul 27
  • New
    Analog1
    Newcomer - Level 1
    2021-07-26

    Hello Tribe,

    I am looking for a replacement power suppy for my Tannoy Reveal 5A monitor. Its not your common universal power supply. inside of the power hook up on monitor only has two prongs. Can someone help me find a replacement power supply cord for this monitor please? 

    Cheers, Analog 

    read more...
    0 40
    • Analog1
      Nigel67 Hi Analog. Please contact our spares department and they will be able to advise you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare parts tab and submit a ticket. Many thanks.
      • Jul 25
    • Analog1
      DavidKnighton Hello Analog1,
      Are you looking for the cord or the actual power supply electronics? If you're just looking for the cord, any IEC plug will do.
      • Jul 27
  • seanbob89
    Contributor - Level 1
    2020-03-28

    Hey guys! 

    Would anyone possibly have any information on where on earth I can find a .tsi mapping file for my CMD Studio 2A to work with Traktor 2? I can't find one anywhere online :/

     

    Thanks in advance!

    0 94
    • seanbob89
      AlexLane

      Hi Sean,


       


      Our care team can probably help you with this, please put in a support ticket.

      • April 8, 2020
    • seanbob89
      dapoch Hi! i also need the tsi file, could you get it? i dont understand why it isnt in the download page
      • Jul 25
Go to page