• crystalgipsy
    Contributor - Level 1

    I have had a pair of XT6F for a while but really struggling to get a satisfactory sound from them. They seem very harsh at the top end and have boomy bass. They replaces a similar sized speaker that did not exhibit any of this. 

    Tried positioning and follow as closs as I can the positioning from the manual but it even brigher if I use the severe toe in recommend.

    I'm getting to the end of my tether with them so any ideas welcome. They sounded so much nicer when I heard them in shop. So likely my room is the key but I can't change this.



    0 147
    • crystalgipsy

      Hi there, no offence, do you checked the connection polarity? If it is correct you could try to avoid the proximity from any reflective surface, like windows or mirrors. I hope this help, best regards

      • February 26, 2020
  • Barolloadv
    Contributor - Level 1

    I am a happy owner of a pair of tannoy dmt 12, unfortunately a case has fallen and has been irreparably damaged. I decided to build a new speaker, since speakers and filters are in excellent condition. My problem is that I can't recover Thiele / Small parameters in any way of the speaker 3136GG. You could send them to me so you can listen to these beautiful speakers again. Thanks so much for your kindness.

    0 91
  • brytech
    Contributor - Level 1

    Im trying to get a copy of the free Tannoy Activ-Assist software thats used in setting up the Reveal 6D Monitors. I seem to have lost my copy after a machine rebuild and Tannoy no longer have it on their website.

    Many thanks


    0 132
  • axshack
    Contributor - Level 1

    Hi, I have a pair of Eyris 2 floor standing column speakers - which are truly magnificent and have been for some years now, but, I am not so sure that I have placed them in the best position - specifically, what distance from the wall should I place these rearward facing bass reflex ported speakers?

    0 126
  • albertodertycia
    Contributor - Level 1


    I need a woofer 5" for the Tannoy Mercury V1i , or your coil.
    model 3121 0208 type 1328

    someone knows where to buy it

    I can't find it anywhere



    0 127
  • OldSchool1948
    Contributor - Level 1

    I'm looking for a tube integrated amplifier for my Tannoy DC8ti speakers and would like to hear what others are using.  Currently, I have a Herron VTSP-3A (r02) preamp and NAD M22v2 power amp.  

    0 127
    • OldSchool1948

      Nobody here qualified to answer. Best going to one of the Fan pages on FB for good advice.

      • May 27, 2020
  • RichardR
    Contributor - Level 1

    Anyone experience a low level buzz with Reveal 802s? Do you have suggestions on how to fix this? I have a small buzz in one of my units, a bit annoying when listening to music at low levels.

    0 174
  • SeanThody
    Contributor - Level 1

    Need an amp pcb board for Tannoy TS2.12 was referred to music tribe for help.

    0 166
    • SeanThody

      Hi Sean ( @SeanThody ), 


      Welcome to the community.  The only way I know to reqeust parts is through the CARE portal that can be found here: https://www.tannoy.com/brand/tannoy/support#googtrans(en|en)


      There's been a lot of issues with the websites lately so it may take you a few tries to open a ticket.  Once you get the ticket submitted you should get an email auto-reply.  If you don't you might want to check your spam folder.  The email will say that you will get a reply within one business day but, be patient, since that's more like a week or more these days. 


      Hope this helps, 


      • December 19, 2019
  • pendragon
    Contributor - Level 2

    I have a new gleaming set of Ardens and also a wood burner which does create some fine dust over time. How is it best to keep the drivers free from dust. Some say a vacuum cleaner (!) others a soft brush and yet others a dust blower. Anyone got the answer? Thanks

    0 108
  • RobSarahs
    Contributor - Level 1

    Hi there, I need a replacement of one of these but cant find it anywhere, can anyone help?Hi there, I need a replacement of one of these but cant find it anywhere, can anyone help?

    0 225
Go to page