• New
    BretHamer
    Contributor - Level 1
    2021-09-20

    I have the ip2000s....the Lower tower is all mids and the upper tower is highs? Is this normal? Also one of the speakers in the lower tower is rattling, I took it out and the speaker sounds fine, put it back in and it crackles, where do I get a decent replacement?

    read more...
    0 2
  • New
    Kpromo004
    Newcomer - Level 1
    2021-09-20

    I HAVE A STATIC TYPE NOISE EVEN WHEN NOTHING IS CONNCETED

    0 5
  • New
    davedarilek53
    Newcomer - Level 1
    2021-09-17

    I'm checking to see if anyone can help me. I feel like Turbosound does not support their products at sll. I have a Milan m18b sub blowing fuses. But Turbosound doesn't share schematics and doesn't have any authorized repair centers in Dallas TX. THAT S UN IMAGINABLE!!  I am forced to wait in line for any answer from music tribe. Who knows how long that will take!!!! Does anyone know how I can get it repaired. We have lots of gigs snd no sub. At this point. If I could get this fixed I was going to purchase a second sub. But I've run into a revolving door. No one knows. Even the dealers I've been buying from for years. I would be very Grateful if you could shed some light on my problem.  Dave D

    read more...
    0 7
    • davedarilek53
      WilliamR Hello Dave, WIlliam from musictribe here. Could you let me know what your case number is so that I can look into this for you?
      • Sep 17
  • New
    MarcelNYC
    Contributor - Level 2
    2021-08-22

    This might be a stupid iQ series question but I can’t seem to find the answer. Regarding the feedback eliminator feature, do I just enable it before the gig by setting it to Auto and just leaving it on Auto or is it supppsed to be enabled during sound check only to “capture” all the problem frequencies then turned off?

    read more...
    0 18
    • MarcelNYC
      GaryHiggins Pretty sure sound check only...though I've never used it with mine ever...manual is not full of details. :-)
      • Aug 23
    • MarcelNYC
      DavidKnighton Hello MarcelNYC,
      If you turn the Feedback Eliminator off after soundcheck, then it is no longer functioning as it's intended purpose. The idea is to leave it running so that if a problem frequency arises mid-show, then it gets squashed. It will end up resetting some filters the longer it's in battle, so keep this in mind as you "turn up" during your show. Remember, it's just one tool in your bag of tricks. Don't rely on it too heavily. Best practice is to use a front end GEQ right off your mixer before the signal hits the iQ.
      • Aug 23
  • New
    Woody123
    Newcomer - Level 1
    2021-08-16

    Hello,

    Just wondering if I can link 2x iQ12s & 2x iQ15B all together with PowerCon cables so I gave just one mains plug? The manual says the following: The maximum number of linked systems depends on the AC supply voltage as well as the maximum current draw of the individual systems in the power chain. When linking a power chain, make sure that the integrated connectors as well as the supplied AC mains cable are never overloaded. If you are uncertain how to calculate the total current draw, please contact your dealer.

    Thanks in advance 

    Richard

    read more...
    0 33
    • Woody123
      GaryHiggins I would say yes, but it could depend on where it’s being done. The electrical systems of different venues could be a factor. I would think most could handle it ok, my 2 cents
      • Aug 16
  • New
    Mackdamusic
    Newcomer - Level 1
    2021-08-13

    I purchased the speaker about 1 yr ago. About 2 months ago I notices when plugged in to the XLR the sound would slightly fade out for for about half a second about every 10-15 min. It never did that with bluetooth.  Note im not a proffessional so i may use it for a few hours on the weekend, never turning the volume higher than 60%. As of about 2 weeks ago ,at about 10% as soon as the first bass hit the sound goes in and out even with bluetooth. The speak is not blown it seems like a connection issue withthe sub and the tower. Note: I have the latest firmware  V1.2.2 

    read more...
    0 20
    • Mackdamusic
      NicJonesMT Hi Mackdamusic.
      Could you please click support at the top of the page, and submit a technical support ticket.
      One of the team will then be able to advise you.
      • Aug 14
  • New
    JonathanRobinson
    Newcomer - Level 1
    2021-08-13

    I've had an ip2000 v2 for a while and just picked up another one second hand but I didn't realize it was the first version. I'm having trouble connecting the two via Bluetooth. Does anyone know if v1 and v2 should be compatible and maybe it's just user error on my part? 

    read more...
    0 32
    • JonathanRobinson
      Nigel67 Hi JonathanRobinson. Unfortunately it is not possible to bluetooth them together. While the form factor is identical between these two models, the voicing and available features are slightly different. For example, the iP2000V2 has built-in reverb and independent EQ for every channel, where the iP2000 does not. In order to maintain balance and fidelity between systems, the unlike models will not allow pairing with each other.
      • Aug 13
  • New
    Jeremydanieljohnston
    Newcomer - Level 1
    2021-08-13

    Is there a way to purchase spare parts for Turbosound Speakers? I've looked everywhere online. My IQ15B Sub stopped working last night- It has super low volume and sounds very distorted. I believe the onboard amplifier has failed. Any way to order a new amp so I can repair it?

    read more...
    0 35
    • Jeremydanieljohnston
      Nigel67 Hi Jeremydanieljohnston. Please contact our spares team and they will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. Have you confirmed that your speakers are not under warranty still? If you are the first owner then you may have a 10 year warranty if purchased on or after 1st September 2014. If so, please fill out a Technical Support ticket instead of a Spares ticket and include your proof of purchase and your warranty will be checked for you.
      • Aug 13
  • New
    GregoryKeith
    Newcomer - Level 1
    2021-08-12

    When and where will I be able to purchase turbo sound speakers

    0 36
  • New
    ZeleniyDrug
    Newcomer - Level 1
    2021-08-11
    Acquired 2 Turbosound iQ15 speakers for sound events. At the very first event, people complained that high frequencies are very hard to hear, and there is practically no low frequencies. How can this problem be corrected?
    read more...
    0 33
    • ZeleniyDrug
      NicJonesMT Hi ZeleniyDrug.
      Your best option would be to submit a tech support ticket and a member of the team will assist you.
      Can you please confirm all other devices that are connected and how they are configured (For example crossovers, Mixers, Outboard effects ETC). We need to ideally know your full setup.

      It may also be worth doing a smaller simplified setup (so running your Mixer/Audio source direct to the speaker). Can you confirm if you still get the issue when using a simplified setup?
      • Aug 11
      • Turbosound iQ15
        ZeleniyDrug Mixers yamaha mg12xuk and laptop and nothing else. High frequencies had to be removed -15.
        • Aug 11
Go to page