Statistics

254,457 members
132,144 posts

Sort

Sort

Discover

  • New
    Midas
    Newcomer - Level 1
    2021-10-20
    Midas New Product Release: HERITAGE-D Series | Digital Mixers

    HERITAGE-D Series
    bit.ly/Midas-HERITAGE-D-Series

    Live Digital Console Centres, Stage Boxes with Multiple Microphone Preamplifiers and Accessories
    The Midas HERITAGE-D Series Digital Mixers and I/O Interfaces are designed to serve our Tour Sound and Installed Sound Customers.

    From: $37,500

    #Midas #HD9624CCIP #HD9624CCTP #HERITAGEDSeries #Mixers #Digital

    read more...
    1 26
    0
    Mark As Solved 0 Reopen Discussion 0
  • New
    DeanRinehart
    Newcomer - Level 1
    2021-10-12
    Midas Venice f series schematics | Analog Mixers

    This is a legacy product that's pretty hard to ship around for repairs...when will Midas support right to repair and release schematics?

    0 8
    0
    Mark As Solved 0 Reopen Discussion 0
    • 1 Replies
      Oldest
    • DeanRinehart
      Dale_M Thanks for your post this is not currently on offer to users however we do have Midas approved repair centres globally who have access to service information, if you need a non warranty repair please go to the Support tab above and select Service.
      • Oct 13
  • New
    Albertvinzenz01
    Newcomer - Level 1
    2021-10-12
    Midas m32r | Digital Mixers

     

    Hallo 

    Midas bootet nicht mehr hoch.

    Nach dem Einschalten gibt es eine Schleife. Hochfahren bis zu einem gewissen Punkt

    Dann wieder down - wieder hoch usw... Schleife.

     

    Wer kann helfen ?

     

    Albertvinzenz01

    read more...
    0 15
    0
    Mark As Solved 0 Reopen Discussion 0
    • 1 Replies
      Oldest
    • Albertvinzenz01
      KyleJohnson Hello, Kyle here with Music Tribe. It sounds like it could be a failure, please contact us directly by clicking on Support and then Care/Service.
      • Oct 12
  • New
    avbarr
    Newcomer - Level 1
    2021-10-11
    Midas m32 jelly type buttons | Digital Mixers

    Is it possible to order new jelly type buttons and replace old black ones on midas m32?

    I own midas m32 with old buttons (hard to see) and new Midas m32R Live with jelly buttons and I like them more.

    So it would be great if I could replace them..

     

    Thank you!

    read more...
    0 6
    0
    Mark As Solved 0 Reopen Discussion 0
    • 1 Replies
      Oldest
    • avbarr
      Nigel67 Hi avbarr. Yes, this shouldn't be a problem. Please contact the spares department and they will be able to advise you part numbers and pricing. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. Many thanks. Just a word of caution, if you are the first owner and purchased the console on or after 1st September 2014, then you have a 10 year warranty which will be voided if you open the console to fit the switch caps. It would have to be done at a local service centre to you to keep the warranty active. If you decide to go this route, then as well as a spares ticket, you will need to send in a Service Ticket so the Team can arrange the warranty service. Many thanks
      • Oct 11
  • New
    chadf9942
    Newcomer - Level 1
    2021-10-08
    Pro 6 power supply | Digital Mixers

    I am looking for a pro 6 power supply. 
    one of mine isn't working

     

    0 6
    0
    Mark As Solved 0 Reopen Discussion 0
    • 1 Replies
      Oldest
    • chadf9942
      Nigel67 HI chadf9942. Is your Midas PRO6 still under warranty? Its 10 years from 1st Sept 2014 if you are the first owner. If so, please send in a Technical Support ticket and we will be able to help you further. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Technical Support tab and submit a ticket. If the PRO6 is out of warranty, then you can purchase a new power supply through our Spares team.
      Please send in a spares request ticket. This can be done from the same page that the Technical Support ticket can be found, just select the Spare Parts tab instead. Many thanks
      • Oct 9
  • New
    Craig71
    Newcomer - Level 1
    2021-10-03
    Mix buses on M32r Live | Digital Mixers

    G'day

    have an interesting issue with my M32R Live at church. Somehow the mixbuses have ended up patched to DCA 1&2 ,also the mixbuses 1 through to 4 which i use for my foldbacks are not controlling master volume on the bus and the only way to adjust mix volume through the mixbuses is individual channel level.All this has come to pass since we upgraded the snake to a DL 16,any thoughts?

    Cheers Craig

    read more...
    0 6
    0
    Mark As Solved 0 Reopen Discussion 0
    • 3 Replies
      Oldest
    • Craig71
      Paul_Vannatto Hi Craig, that sounds like a routing issue. The best way to troubleshoot it is to export your scene to a file using either the Utility button on the console or using M32-Edit. Then upload that file to the cloud (Google Drive, Dropbox, etc.) and post a shareable link. That way we can have a look at your setup and better advise.
      • Oct 3
    • Craig71
      Craig71

      Thanks Pal will do
      • Oct 4
    • Craig71
      Craig71 Hi Paul, everything is fairly well sorted now.It was a routing issue and I worked my way through the signal paths.Will be updating the desk to latest software also . thanks for the heads up on looking at routing.
      • Oct 9
  • New
    davep54
    Newcomer - Level 1
    2021-10-07
    Using X32 for foh and monitors and an m32C for another house mix both console f... | Digital Stagebox Mixers

    I just need to know the configuration on the aes50 cabeling and and how to send all my  outputs from the dl32. I so far have no problem getting all the inputs to both consoles but the outputs are a problem.I wanted to ust xlr out 7 and 8 as my m32C foh mix output and 15 and 16 for x32  for foh in another room. Aslo wanted to send buss mixes 1-6 out of dl32 for monitor sends from x32.

    Hope this make sense. This routing system makes no sense to me and I'm not new here.

    I thought the newer firmware would make it easier and for inputs it does but I cant make sense of the output section.

    read more...
    0 22
    0
    Mark As Solved 0 Reopen Discussion 0
    • 10 Replies
      Oldest
    • davep54
      Paul_Vannatto Unfortunately your description of your outputs is unclear. Also you didn't provide your interconnectivity mapping (how everything is connected together). For example:
      X32 [B] <-> [A] M32C [B] <-> [A] DL32
      • Oct 7
    • davep54
      davep54 I didn't provide mapping cuz that is what i'm looking for to start. then i need to figure how to get the routing where I need it. so I will explain again. I have an X32 at Foh that will get its inputs from DL32 at the stage. that x32 will provide house l+r and 6 monitor sends to stage where dl 32 is. Then I have an M32C at the stage that will get its inputs from the DL32 also. I need the M32C to send the its l + r outputs out of The DL 32 and the X32 Also to send l +r out plus the 6 monitor sends out of the dl32. The M32C is Basically mixing for a different room but all the outs from both boards ar coming from the dl32. Hope this is more clear.
      • Oct 7
    • davep54
      Paul_Vannatto Your second description is much clearer. The interconnectivity mapping I provided will work for your scenario. Give me a bit of time to work out the routing. Which console do you want to control the DL32 preamps?
      • Oct 7
    • davep54
      davep54 The X32
      • Oct 7
    • davep54
      Paul_Vannatto Here you go Dave.

      Interconnectivity mapping ([A] and [B] are AES50 ports)
      X32 [B] <-> [A] M32C [B] <-> [A] DL32

      X32 and M32C
      Routing, Inputs
      * Inputs 1-8 -> AES50 B1-8
      * Inputs 9-16 -> AES50 B9-16
      * Inputs 17-24 -> AES50 B17-24
      * Inputs 25-32 -> AES50 B25-32

      Routing, Out 1-16 (setting up a bank of 8)
      * Output 1 -> bus 1 (post)
      * Output 2 -> bus 2 (post)
      ... (etc)
      * Output 6 -> bus 6 (post)
      * Output 7 -> Main L (post)
      * Output 8 -> Main R (post)

      X32
      Routing, AES50 B (to M32C)
      * Outputs 1-8 -> Out 1-8 (X32 outputs)

      Routing, XLR Out (outputs on the back of the X32 console)
      * Outputs 1-4 -> AES50 B33-36 (M32C outputs)
      * Outputs 5-8 -> AES50 B37-40 (M32C outputs)

      M32C
      Routing, AES50 A (to X32)
      * Outputs 1-8 -> AES50 B1-8 (DL32 inputs)
      * Outputs 9-16 -> AES50 B9-16 (DL32 inputs)
      * Outputs 17-24 -> AES50 B17-24 (DL32 inputs)
      * Outputs 25-32 -> AES50 B25-32 (DL32 inputs)
      * Outputs 33-40 -> Out 1-8 (M32 outputs)

      Routing, AES50 B (to DL32 outputs)
      * Outputs 1-8 -> AES50 A1-8 (X32 outputs)
      * Outputs 9-16 -> Out 1-8 (M32 outputs)

      Typically the console closest to the stagebox has control of the preamps. To relinquish control of M32C to X32, select HA Remote AES50 A, on the M32C Setup, preamps screen.

      If you want digital trims on both of the consoles, also select the HA Gain Split. That will mean that the X32 console will have to control the actual DL32 gains on its Setup, preamps screen.
      • Oct 7
    • View later comments
  • aftermid
    Contributor - Level 2
    2021-10-01
    Routing Back To DAW | Digital Mixers

    Ok,

      I've been trying this now for many months.  Maybe it can't be done, the way I want to do it.  I am sending out from my Pro Tools and Logic into the Midas.  I'd like to use the Midas preamps and effects and take that whole mix and send it back to Pro Tools or Logic via the DN32 card.  Can this be done, without making physical cable connection in the back of the board?  I've experimented with all kinds of routing possiblilities.  All my tracks come in to their respective faders in the Midas.  Now, I want to send this back to print to a stereo track in Pro Tools/Logic.  What am I missing?  I am sure I am doing something wrong in the routing.

    read more...
    0 24
    0
    Mark As Solved 0 Reopen Discussion 0
    • 8 Replies
      Oldest
    • aftermid
      Paul_Vannatto There is no wireless audio option for the M32. You will need to connect a USB cable from the DN32 to the computer (with the DAW). If you want to "take that whole mix and send it back to Pro Tools or Logic via the DN32 card", on the Routing, Out 1-16 screen, assign Main L to Output 1 and Main R to Output 2. Then on the Routing, Card screen, assign Out 1-8 to Outputs 1-8. That will send Main L/R to the DAW on USB 1/2
      • Oct 1
      • Routing Back To DAW
        aftermid Thanks, Paul, I'll try that. I wasn't too clear. I was running the USB from the DN32. What was throwing me was, I thought the default for the Mains on the M32 were 15/16, at least when I look at the meters, that's where it shows up.
        • Oct 1
      • Routing Back To DAW
        aftermid Ok, Paul tried that, but I get massive feed back on 1/2. This is i because I have some instruments coming into 1/2. So, then I did the same thing as above assigning to 15/16, but I get no signal on my 15/16 input on my DAW.
        • Oct 1
      • Routing Back To DAW
        aftermid On the Card in of the M32 I got 1-16 used by Logic. So Logic is sending 16 tracks via the card to 1-16 on the M32. If I, for example assign my Print track on Logic to 13-14, it will only record the instruments coming in on 13-14 and neglect the rest of the mix. Am I routing this correctly? I'd like to use the M32 faders and M32 effects, create my mix and send that mix to a stereo track in Logic.
        • Oct 1
    • aftermid
      Paul_Vannatto You didn't explain in your first post that you were sending tracks from your DAW to the M32. That is why you got a feedback, due to a loop created when sending everything back to the DAW. The best thing to do is to export your scene (either using the Utility button on the console or use the export of X32-Edit) to a file, save it to the cloud (eg. Google Drive, Dropbox, etc.) and post the shareable link. That way we can have a look at how you have the M32 setup and better advise.
      • Oct 1
    • aftermid
      aftermid I just downloaded the x32 Edit, I never used it before. It shows up as an application in the downloads, but not in the Apps section of the computer. You have to execute it from the downloads folder. Is that the way it usually works? If I export it using the utility function, can it be attached here?
      • Oct 1
    • aftermid
      Paul_Vannatto If you are using a Mac, drag the app from the Downloads folder to the Applications folder. Unfortunately only in the original post of a thread can accept attachments. That is why you need to upload to the cloud and provide a shareable link.
      • Oct 2
    • aftermid
      aftermid I will create a new Post Called M32 Stereo Return. I'll put the attachment there.
      • Oct 2
    • View later comments
  • New
    andyp13
    Contributor - Level 3
    2021-10-04
    DP48 Problem | Digital Mixers

    Have a sound problem with the DP48. My Dp48 would make my solo guitar sound like Im playing under water..I discovered that the problem is with the Compressor..once it was off the sound was OK, However my drummer now has the same problem but all compression etc is off? He has to turn the guitar off in his mix? Anyone else suffer from this problem?

     

    Sorry forgot to mention, if anyone can help please email me as I will probably never find this post again.

    [email protected]

    read more...
    0 6
    0
    Mark As Solved 0 Reopen Discussion 0
  • New
    andyp13
    Contributor - Level 3
    2021-10-04
    MIDAS DP48 Problem | Digital Mixers

    Have a sound problem with the DP48. My Dp48 would make my solo guitar sound like Im playing under water..I discovered that the problem is with the Compressor..once it was off the sound was OK, However my drummer now has the same problem but all compression etc is off? He has to turn the guitar off in his mix? Anyone else suffer from this problem? 

    read more...
    0 2
    0
    Mark As Solved 0 Reopen Discussion 0
Go to page