Statistics

261,086 members
139,759 posts
  • New
    Richrae17
    Newcomer - Level 1
    2021-10-27

    We have the Behringer x32 for our church sound system, yesterday I updated the firmware and lost all of the presets in the process. I cant find the monitors and need to know how.

    0 13
    • Richrae17
      Paul_Vannatto Do you not have backup files of all your scenes, snippets and library presets? If not, they are gone. If you describe your setup (what everything is hooked up to) I can help you setup the routing.
      • Oct 27
  • New
    WING_Fred
    Contributor - Level 3
    2021-10-27

    Hi, I want to know it it is possibe to modify the Wing Driver to get 2IN and 94OUT on our WING consol?

    0 9
    • WING_Fred
      Paul_Vannatto No it is not possible. The USB is 48x48
      • Oct 27
    • WING_Fred
      WING_Fred Ok, So can we have 32IN and 64OUT? Because we can do now 48IN/48OUT
      • Oct 27
    • WING_Fred
      Paul_Vannatto No, the hardware limit is 48x48 (ie 48IN/48OUT). You can't change inputs to outputs.
      • Oct 27
    • WING_Fred
      WING_Fred Ok... Thanks! It was a idea to use 40 stereo tracks!!!
      • Oct 27
    • WING_Fred
      Paul_Vannatto You could go to the Dante card (internal or the W-Dante card) which provides 64x64
      • Oct 27
      • W-USB with 2IN and 94OUT, it's possible?
        GaryHiggins Or use both an internal and external Dante together :-) (they will coexist at the same time) and get 128x128. Although I don’t see how one would have enough faders to MIX more than…I’m guessing 48 stereo ch’s at one time? DVS can only handle 64 ch’s max on the recording end if that route is needed. There is I suppose, the case of 2 Wings, each with a Wing-Dante card which could sync up perfectly in real time in a large Dante network. Love to see that someday…I would be scary to imagine a scenario that would require that many inputs at once!
        • Oct 28
  • New
    Mike7300
    Newcomer - Level 1
    2021-10-26

    I've been using mixing station with my X32 so the IPfor that is in there.  I just got an X Air, how do I find its IP address? Also I think I need to buy another separate license from mixing station to operate the software?

    0 12
    • Mike7300
      Paul_Vannatto If the X-Air and tablet are connected to the same external router (don't rely on the internal one) and if you use the Search option in Mixing Station, it will find it. Yes you will need to get a separate license for the X-Air version.
      • Oct 26
    • Mike7300
      Mike7300

      I’m getting an error when I search saying “Getting products failed”. Bag load failed

      • Oct 26
    • Mike7300
      Paul_Vannatto What version of Mixing Station are you using? Also what X-Air firmware version (get that by connecting X-Air Edit to the X-Air console)?
      • Oct 26
    • Mike7300
      Mike7300

      Yep that’s the issue, had to update mixing station and also the x air needs a firmware update.

      • Oct 26
    • Mike7300
      Mike7300

      Yep that’s the issue, had to update mixing station and also the x air needs a firmware update.

      • Oct 26
  • New
    jblosser
    Newcomer - Level 1
    2021-10-25

    Hello, I'm having an issue with my X18. I've been using it for various audio recordings for the past 3 years and occasionally my DAW (Logic) will throw up an error message that there was a sync issue. I've ensured that all of the sample rates are the same on both the x18 and the DAW and have increased my I/O buffer, which hasn't helped. I had 0 issues with the X18 for the first 2 years of owning it and now all of a sudden it periodically has that error message.

    Any suggestions?

    read more...
    0 11
  • New
    GeorgeDougherty
    Contributor - Level 2
    2021-10-17

    Would love to see an adjustable slope on the parametric EQ.  6/12/24 would be good.

    Additionally, maybe relocating that enable/disable from the Settings page to somewhere on the EQ interface.  Possibly using a width adjustment knob.

    1 9
    • GeorgeDougherty
      Paul_Vannatto Hey George, if you select a bus, matrix or main EQ, then the Settings (screen top), there are options for the various slopes. For the channel EQ only shelf and parametric options are available.
      • Oct 17
    • GeorgeDougherty
      GeorgeDougherty Odd, I could have sworn I posted my reply.
      I wasn't very clear in my request.. My suggestion has to do with adding that ability on the input channels like many of the newer Yamaha consoles and similar to the downstream processing channels on the Wing.
      In addition, the UI isn't very intuitive to change up those filter slopes right now where we have the capability. Those types of functions seem better suited to be up front in the UI alongside the other EQ adjustments.
      • Oct 24
    • GeorgeDougherty
      Paul_Vannatto Hey George, if you post from the notification (or email link), that post goes into a parallel universe and does not show up in the standard thread (very aggravating!).
      I do agree that adding these slopes to the input channel strips would be nice. But there may be a DSP limitation issue that won't allow this.
      I also agree that the filter slopes is not in an intuitive location. There are a number of features that I have to scratch my head to think of where I last found them. And as more features get added, I think it is only going to get worse.
      • Oct 25
  • New
    DaveBeard
    Contributor - Level 2
    2021-10-22

    I've been using my 4 year old X Air 18 with the same computer running Windows 10 almost daily, and suddenly yesterday evening when I powered up my "studio", no sound could be heard from any of my inputs.For about 4 years all I have needed to do was power the X18, then power up my PC, (or vice versa) and I could hear all my inputs including the output audio of my PC.

    Now, I have to open the X Air editor program to hear my inputs and see the X Air digital meters respond to audio. At about 80% load progress of the editor, I begin to hear sound. Very peculiar. Very irritating.

    Has anybody experienced this?

    I am running V1.5 of the X Air editor, and W10 Pro v 10.0.19041 Build 19041.

     

    read more...
    0 16
    • DaveBeard
      DaveBeard Current firmware version is 1.09 fwiw.
      • Oct 22
    • DaveBeard
      Paul_Vannatto That firmware is pretty old Dave. Current version is 1.18 and X-Air Edit 1.7. I would suggest you first update both firmware and Edit.
      • Oct 22
    • DaveBeard
      DaveBeard

      Thanks Paul, I have updated both successfully, and unfortunately, there is no change in my issue.

      • Oct 22
    • DaveBeard
      Paul_Vannatto When you sync X-Air Edit to the PC, which direction are you doing it - Mixer to PC or PC to Mixer?
      • Oct 22
    • DaveBeard
      DaveBeard

      PC to Mixer

      • Oct 22
  • New
    JAS3712
    Newcomer - Level 1
    2021-10-17

    After using the Flow 8 for a while I am ready for a Flow 12 or 16! Hope either of those are being developed. And hope they have NDI (Network Device Interface) support over Ethernet or Wi-Fi 6E or both!

    1 37
    • JAS3712
      PedroRodrigues Hi JAS3712, thank you for your post, at this moment we cannot confirm any future releases, nevertheless please keep an eye on our social media for any news. Thank you
      • Oct 23
  • New
    schilcur2112
    Newcomer - Level 1
    2021-10-19

    While I'm not a newbie, I'm not an expert either, and I'm having difficulty getting simple reverb on a vocal channel, either via inserting into the channel, or send/return. I have the Hall Reverb set up in the FX1 slot. Sending channel 1 (vocal) to FX1, and FX1 is sending signal to the Main. The meters display indicates everything is getting/sending signal, yet I don't hear any reverb in either headphones or main signal routed through amp and speaker. Same issue if I try to insert reverb into channel 1.....no reverb. I have a feeling there is a button somewhere that isn't pushed or set right.

    I'm using the Xair app on the Ipad to run an XR 16 mixer. Have looked at all the pertinent YT videos and am not having any success. On a separate rant, the app illustrated on the YT videos does not resemble the app I'm currently using. Would love to see something on YT using the current XAir app.

    Thanks for the help.

    Curt

    read more...
    0 16
    • schilcur2112
      schilcur2112 Ok, an little update after messing it more this morning. I was able to get reverb by inserting Effect 1 (or any of the others) into the Main channel. While I'm happy to actually get any reverb, inserting it into the mains is not the way to do it. However, bolstered by this success I went back to Channel 1 and inserted Effect 1 and......nothing. But, when I inserted effect 2 (3 and 4), they worked. I went back and edited effect 1 to be identical to effect 2 and I still get nothing when inserting effect 1, which makes absolutely no sense, unless something, somewhere, in effect 1 channel settings is set wrong. Still, I can't get send/return method to work with any of the effect returns (1 thru 4). Pic below captures the meters page showing signal supposedly going to all the right places.
      • Oct 19
    • schilcur2112
      Paul_Vannatto Goto the FX screen where you can see the 4 FX slots. What FX is assigned to slot 1? Is the Insert button selected? From what you describe, in all likelihood, the Insert button is selected and the inputs are assigned as an insert to something you are not using. If you want it to be a sends/return (sidechain), change the input assignment to Off.

      If you want reverb, you want it as a sidechain (sends to FX1 and returned to FX1L/FX1R) since reverbs do not have a wet/dry mix adjustment. Setting a reverb as an insert will only give you 100% reverb output, which you don't want.
      • Oct 19
    • schilcur2112
      schilcur2112

      Paul V, appreciate the suggestion. I'm pretty sure I tried turning off all the insert buttons, but I'll go back and verify. Will update after I give it a try. Thanks.

      • Oct 19
    • schilcur2112
      schilcur2112 ok, partial success. Turned off insert everywhere....on the effects themselves, and in the individual channels. Sending channel one signal to effect 1 (vintage reverb), increase fader on effect 1, and I get reverb. Perfect! Try to set up the exact same thing for channel two/effect two and channel 3/effect three and I get no reverb. If I send channel 2 or 3 to effect 1, I get reverb. This is the kind of thing that aggravates me.....do exactly the same thing and get a different result. Is it possible that effects 2 and 3 are routed differently? When routing ch2/eff2 and ch3/eff3 I can see in the effects window that both eff2 and eff3 are getting and outputting signal, same as ch1/eff1 when I do hear reverb.
      • Oct 19
    • schilcur2112
      Paul_Vannatto Are the FX2L/2R and FX3L/3R return channel strips muted or faders all the way down? What about the FX2 and FX3 buses (sends) - are they muted or faders all the way down? Also check the FX2L/FX2R and FX3L/FX3R LR is enabled (on the Main screen).
      • Oct 19
  • New
    Mike7300
    Newcomer - Level 1
    2021-10-22

    I just bought an XR12.  Is it possible to plug in a Bluetooth interface with dual rca? I'm looking to connect my iPhone to the mixer to play music out of it. With my X32 rack there are stereo left right that I connect the rca cable to.  Thanks!

    read more...
    0 9
    • Mike7300
      Paul_Vannatto Yes you should be able to use a bluetooth interface. But you will need a couple of RCA to 1/4" cables to connect to the XR12.
      • Oct 22
  • New
    DanielThompson
    Contributor - Level 2
    2021-10-22

    Thanks to Paul Vannatto and others on this forum/tribe. The lightbulb turned on. I get it now. I understand how the parts connect, how to make changes easily, and get it to do what we need. It's very exciting. 

    0 15
Go to page