Statistics

289,864 members
172,428 posts
  • New
    kenspi
    Newcomer - Level 1
    2022-05-16

    We would like to connect a pair of stage boxes to the M32 in a house of worship. Ideally it would be one DL32 and one DL16.

    My intention is to have the DL32 backstage to handle all of our FOH outputs as well as our stage monitors and IEMs, plus the inputs from wireless mic receivers also installed backstage.  The DL16 would be on the stage to handle inputs from drums and other instruments, plus utilize the Ultranet connection for personal monitor mixers.  The stage boxes would have a connection to the M32's AES50 A & B jacks.  Are there any limitations on this setup, such as total usable inputs/outputs? Are there any benefits or down-sides to connecting each to a different AES50 bus?

    read more...
    0 19
    • kenspi
      Nigel67 Hi kenspi. AES50 at 48K allows 48 channels bi-directionally so there would be no limitations at all connecting a DL16 and DL32 in series with each other. The only reason that I can think of for connecting the DL16 to AES50 A and DL32 to AES50 B on the M32Live would purely be for the possibility of damage occurring to the AES50 cable between the DL16 which is on stage and the DL32 which is backstage. What I am trying to say is that is may be easier to route the cable direct from the M32 to the DL32 than go from the DL16 to DL32. Apart from that, except for the physical routing in the patching page of the M32, either way is identical.
      • May 15
  • New
    JTF4
    Newcomer - Level 1
    2022-05-14

    Hello!

    Does anyone here have the OSC control documentation for the midas pro series? I'm working on integrating them into companion, but I'm having trouble digging up good references on their protocol.

    0 15
  • New
    ToddBuckner
    Newcomer - Level 1
    2022-05-11

    Midas Pro1 straight out of box new wont boot past the midas screen ( see photo )

     

    anbody got any ideas ?

    0 28
    • ToddBuckner
      KyleJohnson Hello, Kyle here with Music Tribe. Could you please submit a Technical support ticket through the Support portal?
      • May 11
    • ToddBuckner
      KevinMaxwell First thought was did you immediately call the company that you bought it from and what did they say? I would assume that maybe something worked its way loose in shipping or do they all come that way and do you need to hook up a computer to it and load the latest firmware?
      • May 12
    • ToddBuckner
      MdeV Maybe a stupid question, but the screen on the picture is not the boot screen, but the lock screen (see the grey unlock in the down left corner) Did you try to unlock it?
      • May 12
      • Midas Pro1 boot issue
        KevinMaxwell Would the console stay in Lock mode even after it is turned off (for shipping) and turned on again?
        • May 12
  • New
    stefaniaoctaviana
    Newcomer - Level 1
    2022-05-09

    Hello, I'm a customer from Romania and I want to buy an Midas M32 Live console but I can't find any. Can you give me an approximate date when the console will be available to purchase in Europe? Thank you! 

    0 11
  • New
    MixingLane
    Newcomer - Level 1
    2022-05-05

    Hello,
    appreciate our input on following Need and Idea about using 2x Midas HUB4 for connecting 41 channels and 8x stereo IEM
    41 channels on stage, 8 person band, 2xDL16, 1x DL32.
    Need:
    8x stereo wireless IEM from stage, IEM mix by musician's app and FOH engineer
    Idea:
    3x DL stageboxes connected with AES50 to Midas HUB4, 4x2 analog out (from HUB4) to 4x IEM transmitters
    Second midas HUB4 daisy chained over AES50 with first Midas HUB4, 4x2 analog out (from HUB4) to 4x IEM transmitters
    AES50 frome second Midas HUB4 to FOH: Behringer Wing
    Questions:
    Can Midas HUB4 be daisy chained? or do I need 2x AES50 from FOH?
    Can this idea technically be done?
    Are there better/other ways of implementing "need"?
    See attached simple scetch of the set-up in mind
    Thank you, Arie


    View Attachment

    read more...
    0 17
    • MixingLane
      Paul_Vannatto Hi Arie, yes the Hub4 can be daisy chained as you suggested. Just make sure the "Port 1-4 AES50 A1-32" is turned off (unlit) on both units, which will allow all 48 inputs from the DL stageboxes to pass through to the Wing.

      I just had a look at your attachment and there is one thing you will need to change. Instead of having each of the DL stageboxes attached to the second Hub4, you will need to daisy-chain them as well.

      Of course a more "fail-safe" setup would have the dual DP48 connected to the Wing using an AES50 cable and the DL stageboxes connected to the Wing using a second AES50 cable.
      • May 5
      • 2x Midas Hub4?
        MixingLane Thanks Paul_Vannatto. I made a second drawing according your advice. Looks like a great set-up!
        • May 5
    • MixingLane
      Paul_Vannatto Yes, that should work for you Arie.
      • May 5
      • 2x Midas Hub4?
        MixingLane Great! Now I either have to go for the Hub4's or control myself and wait for the Hub8 ?
        • May 5
    • MixingLane
      Paul_Vannatto I'm not aware of any plans for a Hub8. So I would suggest you get the 2 Hub4's
      • May 5
    • MixingLane
      MixingLane

      Final question (I hope ;-) ) Can the Hub4 be used without DP48? So simply in a side rack on stage to make the connection with Wireless IEM transmitters, and the IEM mix be done by the FOH (Behringer Wing). According to the documentation, I think: yes but there is some ambiguous tekst that makes me doubt. Thanks!

      • May 10
  • New
    Miradorabe23
    Newcomer - Level 1
    2022-05-03

    Bonjour,

    Ma table Midas X32 LIVE n'est plus reconnue par mon Mac. J'ai l'habitude de faire des enregistrements dessus avec la cable USB et tout d'un coup la table n'est plus visible par le Mac (il n'y rien qui apparaît lorsque je branche le cable USB). J'ai déjà changé d'ordinateur, de cable USB etc... mais rien ne change.

    Pourtant l'enregistrement avec les cartes SD marchent nickel.

    Merci!

    read more...
    0 17
    • Miradorabe23
      Paul_Vannatto Make sure that you have the USB cable from the X-Live card plugged into a USB 2.0 port in the Mac. It doesn't work very well in a USB 3 port.
      • May 4
  • New
    jovanni
    Newcomer - Level 2
    2022-05-02

    Hola, me gustaria ir a realizar la certificacion de midas pro como lo puedo hacer?

    0 22
  • New
    Tykeys2006
    Newcomer - Level 1
    2022-04-30

    Having issues connecting my router and iPad to m32r and can't connect to iPad it keeps saying listening and never connects 

    0 9
    • Tykeys2006
      Dale_M Swap the netwrork cable, try another router, try another iPad and see if the issues stays at the console.
      • Apr 29
  • New
    DANMOLINA
    Newcomer - Level 1
    2022-04-28

    is the Midas M32 discontinued as well as Behringer X32? 

     

    I urgently need to buy 2-3 audio consoles for a college. I would be hestitant to purchase X32 and/or M32 for fear of discontinued resource, etc 

     

    Could anyone from Midas advise on this please?

    read more...
    0 96
    • DANMOLINA
      Dale_M The M32 is a legacy product but the succesor M32-LIVE is still current, both however are still supported as they bothe run the latest 4.06 firmware as does the Behringer X32 which is still current. I hope this helps.
      • Apr 28
      • is the Midas M32 discontinued as well as Behringer X32?
        jd3994 How about the M32C?
        • Apr 28
      • is the Midas M32 discontinued as well as Behringer X32?
        DANMOLINA M32C shows "current" status. However, X32 core is legacy.
        If you search up on Behringer or Midas website it lists past and present products and shows "LEGACY PRODUCT" when discontinued.
        • Apr 28
  • New
    Timkanter
    Newcomer - Level 1
    2022-04-26

    A pro9 we have is acting strange. Mc1 and mc2 seem happy, but only mc1 eq selections work, and the pop up happens on both screens. The center navigation doesn't work (patching/metering etc.) The two trackball mice work independently as they should. 

     

    Any ideas on why this is happening?

    read more...
    0 17
    • Timkanter
      Dale_M Do you think you could submit a Technical ticket from above with a video link to what you are seeing please so we can help you?
      • Apr 27
Go to page