Statistics

298,601 members
182,223 posts
  • New
    Bernarada
    Contributor - Level 1
    2021-02-22

    Hi. I'm looking at buying a Behringer FCB1010 and I need to know if it works with MacOS Catalina. I searched the Web and couln't find a definite answer. Anyone here knows if it does ? Thanks. 

    0 52
    • Bernarada
      KyleJohnson Hello, Kyle here with Music Tribe. The operating system of your computer should not make any difference in the operation of the FCB1010. The Unit does not have a USB port to connect to a computer. I know there are some 3rd party apps people use to program the FCB1010, but these are not made/supported by Music Tribe.
      • February 22, 2021
    • Bernarada
      Bernarada Thanks, Kyle.
      • February 22, 2021
  • New
    EqyFranky
    Newcomer - Level 1
    2021-02-16

    Can anyone here help me with the problematic DI pedal V-Tone Bass Driver. I bought this tool not even two months but it can't be used and it's still under warranty. Please help.

    0 78
    • EqyFranky
      Nigel67 Hi EqyFranky. I am sorry to hear that your unit has a fault so soon after purchase. Please click on the Support tab at the top of the page. In the new page that opens, scroll down and click on the Service Tab and submit a ticket. One of my colleagues will then be able to help with the repair of your unit.
      • February 15, 2021
  • New
    FounaudLaurent
    Newcomer - Level 2
    2021-02-05
    Hello everybody.
    I am a singer guitarist and I use the X32 rack for bands or solo, in parallel a kemper rack for my guitars.
    Despite many attempts, the midi clocks of the two racks do not synchronize.
    I would like to be able to hit the tempo on the Kemper (master) and find the same on the X32 rack (slave).
    The connection is made with two midi cables.
    Do you have a solution?
    Maybe a midi-usb adapter like the
    Roland - UM-ONE mk2 | USB MIDI Interface.
    
    "Midi Kemper exit -
    Usb input X32 rack "?
    Clock source setting to Exp. Card.
    
    Thank you in advance for your answers.
    read more...
    0 408
  • New
    Philippanico
    Newcomer - Level 1
    2021-02-04

    If I connect my xtouch one to an xtouch extender can I have the extender running tracks 1 to 8. Many thanks

    0 71
    • Philippanico
      DaveMorrison What DAW are you using?
      • February 4, 2021
      • If I connect my xtouch one to the xtouch extender can I have the extender running tracks 1 to 8. Many thanks
        Philippanico I’m using Mixcraft 9 pro studio
        • February 4, 2021
    • Philippanico
      Philippanico I’m using mixcraft 9 pro studio
      • February 4, 2021
      • If I connect my xtouch one to the xtouch extender can I have the extender running tracks 1 to 8. Many thanks
        DaveMorrison I asked about the DAW because that's where the MCU protocol is implemented. The programmers of Mixcraft choose which MCU functions to implement. Maybe another user on this forum (or Behringer) has used the X-Touch this way. You may get better response from Acoustica.
        • February 4, 2021
  • New
    wjones40
    Newcomer - Level 1
    2021-01-21

    I bought two Model D's and hooked them up via polychain. The second one started sounding really crappy - lots of feedback and distortion, so I unhooked it. I then used the synthtools software to turn off polychaining on the first in the chain. Since then, I've had no sound whatsover, except on power-on where it sounds like it's farting for about two seconds. Then nothing. I've no idea what I've done, but neither plays now unless I'm connected to a DAW. Then I can get the sound from the Model D with the first unit, the one that was polychain="ON". Nothing whatsoever from the other unit. I've tried power off, power on. Power on after an hour wait, nothing seems to work. I even tried power on and switching the A440 to turn off polychaining. Nothing works. Is there a way to do a software reset on these?

    read more...
    0 120
    • wjones40
      NicJonesMT Hi WJones40.
      There is a restore to facotry defaults setting in the Synthtribe app.
      Can you please confirm what version you are using? The latest version of the ST app is 2.4.6 and can be downloaded from the "Software" section of the product page;

      https://www.behringer.com/product.html?modelCode=P0CQJ

      If this doesnt resolve the issue could you please open a Tech support ticket (Click support above and scroll down the page).
      We can then go through some trouble shooting steps and advise you further.
      • January 20, 2021
  • New
    georgeharmon5
    Newcomer - Level 1
    2021-01-11

    Hello,

     

    Can anybody advise on why delivery of the Behringer RD-6A Drum Machine is taking so long to be in stock?

    I ordered mine on November 29, 2020 through Amamzon and they still show it not in stock yet.

     

    Any help or info?

     

    Thank you!

    read more...
    0 94
    • georgeharmon5
      PedroRodrigues Hi georgeharmon5 please be aware that question should be address to Amazon as they are responsible for the shipping of the nits they acquire. Thank you
      • January 20, 2021
      • What's the hold up with the RD-6A deliveries?
        georgeharmon5 Hi Pedro, Please be aware that Amazon instructs customers in my situation to direct these questions to the manufacturer in these cases, and since trying to contact Behringer is like playing "Hide n' Go Seek" in a black hole, I decided to post here. If you are not be being helpful or adding to the solution, then why respond anyway? Unless, you are a part of customer service, then please be advised that your approach is many decibels below satisfactory.
        • 1
        • ·
        • January 20, 2021
      • What's the hold up with the RD-6A deliveries?
        PedroRodrigues Hi georgeharmon5, thank you for your reply, unfortunately that manner is effectively managed directly by the partner therefor that is the only information possible to provide. Thank you
        • January 21, 2021
  • New
    lpagross
    Newcomer - Level 1
    2020-12-14

    I've bought a Behringer X-Touch Mini to control X32 Edit & my X32 Rack. Is there any documentation about how Mackie Control Mode has been set up, or is there an editor I can use?

    1 311
    • lpagross
      lpagross The X-Touch Mini could be such a great controller for the X32 Rack if it just had a better MC Mode. Is there any way to edit the MC Mode?
      • January 17, 2021
  • New
    Georgem1968
    Newcomer - Level 1
    2021-01-07

    I searched the internet but could'nt find a solution. I managed to let the fcb change presets in Overloud's TH3, but can't get it to change banks? If I use Learn in TH3's midi section (for Next bank or Previous bank) and push the UP or DOWN pedal twice, I get No midi signal found message. 

    If I use the pedal Up or Down, there is no bank change in TH3. How can I get this done? 

    read more...
    0 78
    • Georgem1968
      NicJonesMT Hi GeorgeM1968.
      Sorry fr the delay contacting you.
      I work in the UK Support team.

      Can you please confirm how you are connecting the FCB to your computer running TH3?
      If you open a MIDI monitoring software such as MIDIox are you able to see that the FCB is sending Messages into the Computer?
      How have you programmed the pedals on the FCB?

      Normally I would recommend programming the FCB to the MIDI Implementation of the device you are connecting to, but looking at the manual TH3 only has the MIDI learn function. In theory if you set the pedal to send a message you should be in theory able to use the MIDI learn function.

      If you need additional support I would recommend clicking Support at the top of the page and submitting a tech support ticket. We can then go through some more trouble shooting with you and try to get this resolved.
      • January 14, 2021
  • New
    Elterwater2
    Newcomer - Level 1
    2021-01-13

    I am attempting to use the XR18 as an audio and MIDI interface with an Behringer FCB1010 foot controller; to control a plug in (in this case the Cory Wong Archetype) however this seems to be almost impossible as the product manuals lack information and there are no resources on the web to answer any questions.

    I am very new to MIDI  and I'm struggling to get this set up.

    The setup is:

    1. XR18 via acces point connected to XR Edit on Mac Book

    2. Guitar into XR 18 Channel 1

    3. USB from XR18 to Mac Book Pro (2019)

     -- --This works fine and connects to the Cory Wong Archetype plug in with the USB Returns of the XR18 set to AUX L/R sending the signal back into the AUX output

    -------------------------------------------------------------------------------------

    The FCB1010 is then connected to the XR18 - FCB 1010 MIDI OUT to XR18 MIDI IN - and XR18 MIDI OUT to FCB1010 MIDI IN

    The problem is that the XR18 does not recognise the FCB1010.  I have set the XR18 Audio/MIDI Setup to USB-DIN Pass Thru

    Firstly, is it possible to use the XR18 as a MIDI interface in this way? Or is an audio interface required?

    If it is, I'm aware that MIDI has to be on the same Channel, so I have set channel 01 on the FCB1010 but there is no guidance on how to set a MIDI channel on the XR18, so it is possible they may not be 'talking' to each other.

    Assuming this CAN be done - how do I then get the setup to control/change the Cory Wong Archetypeplug in? I am only looking for a stom-box type changer initially.

    ------------------------------------------------------------------------------------

    Any answers on this would be greatly appreciated.

     

     

     

     

    read more...
    0 228
    • Elterwater2
      Paul_Vannatto Connecting "XR18 - FCB 1010 MIDI OUT to XR18 MIDI IN - and XR18 MIDI OUT to FCB1010 MIDI IN" with the XR18 USB/DIN Pass-Thru enabled means that what is tranmitted from the footpedal is returned to the footpedal. You need to connect the footpedal directly to the computer.
      • January 13, 2021
      • Behringer XR18 connectivity
        Elterwater2 Thanks for the reply Paul. I have a cable on the way to make that connection. I was curious to know though, if the XR18 itself could be used in the same way as an audio interface with DIN connections? If anyone knows?
        • January 14, 2021
      • Behringer XR18 connectivity
        Paul_Vannatto I think what you are trying to do is convert the MIDI in to the USB out, which does not work. The main purpose of the midi in the XR18 is to use midi devices control the XR18. The pass thru setting was added to allow the midi in to pass thru to the midi out . When that is enabled, midi control of the XR18 is disabled.
        • January 14, 2021
  • New
    Navelpluisje
    Newcomer - Level 1
    2020-12-28

    I own a BCF2000 and it's not really easy to program it. Because there was an editor for windows, there should be a kind of comunication protocol for the BCF2000. Currently I'm working on a web-based editor for my Akai LPD8. I would like to continue this with adding the BCF2000 to it, so also other BCF owners are able to program the device way easier.

    Is there documentation available. If not, will Behringer empower also the owners of older devices?

    read more...
    0 58
Go to page