259,717 members
138,123 posts
  • New
    Triber Moderator

    Learn More: 
    An authentic reproduction of the original “System 2500” circuitry from the ‘70s that can fit in a standard Eurorack case. The MIX-SEQUENCER MODULE 1050 allows you to rapidly select waveforms and signals via a conventional mixer format. Controlling and altering a sequence on the fly has never been so easy!
    List Price: $149 (in stock and immediately shipping from our factory)

    #Behringer #MIXSEQUENCERMODULE1050 #SynthesizersAndKeyboards #Eurorack #2500Series
    0 56
  • New
    Newcomer - Level 1

    I recently bought a used Deepmind 12D, but it did not come with the rack ears. I've been trying to get a hold of some, but I can't get anyone to reply to my spare parts request. Anyone have any thoughts?

    Thanks ahead of time,


    0 10
    • AlexZwart
      ChrisEdwards1 Hi AlexZwart, could you please confirm for me your case number? This will allow me to investigate further and have a member of the spares team follow-up
      • Sep 8
  • New
    Newcomer - Level 1

    Behringer - Technical Support - CAS-429116-J3Q6Z5 - CRM:0152300003335 - CAS-481003-P6F4S2


    I am from India and I bought VC340 in Dec 2020. Exactly after 3 months, the mono output of developed crackle, hiss noise. I raised a case in the music tribe and after another 5 months, they said India is an unsupported location and I have to contact the shop I bought it from. So I googled and found out that the whole and sole distributor of Behringer products are who claim they are 'authorized distributors' of Behringer products. They are not listed in Behringer's website as authorized distributors. Anyhow, I contacted them and they said that they can service my unit. I sent them the unit and now they are saying they have ordered some board that needs to be replaced, It might take 4 weeks as they have to source it from Taiwan? I am really not sure if they can really sense the problem with the unit. There is an inherent distorted crackle, hiss and pops in the mono output. The unit is supposed to be replaced in case of defects right? Replacing the board might throw off the voice balance and whatnot. What are the warranty conditions if the unit fails to perform within 1 year of purchase? I am worried now since India is an unsupported location, the warranty is not the same as support locations? I have DeepMind 12D and Neutron semi-modular synth as well. What should I do if these break down? I should be very careful about Behringer in the future. 



    0 17
    • SwayambhuRecords
      Nigel67 Hi SwayambhuRecords. I am sorry to hear about the issues that you are experiencing. Unfortunately, only the Service Team can answer your questions, so I am copying and pasting your above message into your original case (CAS-429116-J3Q6Z5), re-opening it for you and asking the Service Team to reply. You should hear back from the shortly
      • Sep 1
      • VC340 India Warranty
        SwayambhuRecords what's the point when nobody replies. Anyways... The service center here sent the unit to Mumbai head office. Can you confirm if Aphatec is good to go for Behringer products? And what is the warranty condition when the unit fails within a year of purchase?
        • Sep 5
  • New
    Newcomer - Level 1

    Is it possible to trigger the arpeggiator from the RD 8 accent? 


    Any thoughts?

    0 10
  • New
    Newcomer - Level 1

    I'm going to buy the Behringer 960 sequencer. I have plenty of analogue synths with cv inputs. What else do I need to get the sequencer up and running to trigger the sounds of my synths in a sequence.

    0 34
    • Abcd4
      PedroRodrigues Hi Abcd4 Please consider that the Behringer 960 the oscillator is a built-in clock that makes the sequencer operate.
      When you vary its frequency, you will not be changing the pitch of a sound but rather the speed at which the sequencer runs.
      To play, you push the Oscillator On button. To stop, you push the Oscillator Off button.
      When it comes to the CV outputs on this unit they’re not labelled as A, B and C, in pairs at the end of each row, the gate output is labelled Oscillator Output.
      Please take in to account that the 960 offers three rows of eight variable controllers with a flashing LED above each step.
      The user can set up these rows in parallel to generate three-note chords or it could play three different monophonic patterns simultaneously.
      To play 16- or 24-note patterns, you must have the 962 Sequential Switch module, as it switches from one row to the next as each comes to an end.
      • Aug 25
  • New
    Newcomer - Level 1

    When I use the fbq button on my new kxd12 the red LEDs come on and stay on, even with nothing plugged in. Any ideas on what's going on? So far I truly hate the sound of the amp.

    0 24
  • New
    Newcomer - Level 1

    Hi all,

    Revently purchased a td3 and when connecting it to my Apollo 8 interface and connecting it to ableton through external instrument no audio comes out but the midi information is played which I can hear through the headphones out port. 

    0 57
    • NickNunez
      PedroRodrigues Hi NickNunez, please confirm that you have configure the unit with Ableton as followed:

      In a new Live Set insert a MIDI track .

      Select Session View and Device View if not already selected.

      Select Instruments from Categories on the left side of the Ableton Live window and drag/drop an External Instrument into the MIDI track. You should see the External Instrument title bar inside the device view.

      Set "MIDI To" to the TD-3. (If you don't see it, either your computer's not seeing the TD-3 or you started Ableton before turning it on. If it's the latter, turn the TD-3 on and go back to the previous step.) MIDI channel will probably be 1. I'm going to guess that you can use Behringer SynthTool to set the MIDI channel on the TD-3 end if necessary.

      Set "Audio From" to the input number on your audio interface.
      Now, you make a choice: Or do you want to use Ableton to trigger the TD-3 to play notes, or do you want to use the TD-3's internal sequencer to generate the notes.
      To make these changes, you'll go to Preferences in Ableton. To make Ableton send MIDI notes to the TD-3, select the Link/MIDI tab in Ableton, and where it says "Output: Behringer TD-3" or something to that effect, turn Track on. If you'd like to use the TD-3's internal sequencer, turn Sync on instead.

      To deal with latency,It will be helpful to turn the Ableton click track on and play quarter notes from the TD-3 so you can tune the track delay times so the TD-3 plays nice with your internal instruments and VSTis in Ableton.

      The D button toward the lower right side of the window in Ableton toggles the Track Delay controls; this lets you add delay time to the software synths and drum machines so your computer can send sync or MIDI to the TD-3, the TD-3 can generate sound, and your audio interface can receive the signal and burp it all out through your speakers without the TD-3 lagging behind the soft synths.
      • Aug 24
  • New
    Newcomer - Level 2

    When will the DeepMind12 App be updated to work with current iPad version?

    2 37
    • Thebenj
      PedroRodrigues Hi Thebenj, thank you for your post, please consider that at this moment we are analyzing this matter and as soon as as possible we will have information on this matter. Thank you
      • Aug 23
      • DeepMind12 App update?
        bernyboss Is there any news about the ios app update?
        • Oct 20
  • New
    Newcomer - Level 1

    Also here I insert the same message from the "Odyssey" section hoping that someone can reply. Only sound, regardless of the context of use.

    I know the Odyssey (the old ARP) directly but not the 2600 (only concerts and records). Is the Odyssey "contained" in the 2600 or are they still two different machines, even with sounds from the same family?

    In other words, does it make sense to have both?

    Many thanks, Giovanni, Italia.

    0 48
    • giosanta
      DavidKnighton Hello giosanta,
      Some things to consider. Less features on the Odyssey, however the Odyssey does have some extra features that the 2600 doesn't have like osc sync, dedicated lfo and hpf. 2600 is patchable, has a preamp, spring reverb, extra oscillator, lag processors. Odyssey doesn't have those features. Also the Odyssey comes with a built in keyboard and sequencer, where the 2600 does not. You can see they are very different machines, so you may want to consider what else you need when you make your purchase. For example, if you don't have an external keyboard or sequencer, you'll need to buy one along with the 2600. This makes the Odyssey a good choice for newcomers, and especially a cost effective purchase for those on a budget, because the keyboard control is built in, and you don't need to worry about external controllers.
      • Apr 3
      • 2600 and Odyssey
        pedroflute Sorry David... you said: "however the Odyssey does have some extra features that the 2600 doesn't have like osc sync, dedicated lfo"... BUT THE 2600 DOES HAVE ALL OF THOSE AS WELL [in fact BOTh OSC 2 & 3 HAVE "SYNC" On them,,, I use them all the time... they sound fantastic!!!! ...only, you are right on that the 2600 does not have a HPF, but that can be addressed by creating an HPF [and a BPF, believe you me!!!] by mixing an inverted version of whatever original audio signal fed into the LPF... many videos on that on Youtube... Cheers!!
        • Aug 19
  • New
    Newcomer - Level 1

    Hi guys! Hope you can help me with this problem. My Pro-1 purchased on Musicstore arrived today and i noticed that the sequencer and arp do not work completely !! Even when I select the sequence 1 or 2 the sound disappears. I just don't understand what it can be and I don't know if it's a Pro-1 defect. I've tried various methods but none of them work.. I tried to connect it with ableton in external instrument, both in USB and with a audio interface with the midi connector, I tried to deactivate the polychain (the power led turns red and when I press a note it turns green skipping some notes played), I thought ableton was the problem and I connected the Pro-1 (midi in) to my td-3 (midi out) but still nothing. You try them all but I still can't solve it ..
    I can post photos and videos if it can help me. I hope you can help me.

    0 42
    • Alexander420
      PedroRodrigues Hi Alexander420, please consider that this information was provided on the case that you have submitter directly with the Tech support Team. Please use the case submitted to exclusively exchange information on this matter. Thank you
      • Aug 19
Go to page