Statistics

251,053 members
128,283 posts
  • New
    jffry101
    Newcomer - Level 1
    2021-09-13

    Is it possible to save different profiles, where the levels persist between the different profiles? As in, say the mic level is moved to 75%, and when I move to a different profile, to keep that number. Ideally, I'd only alter the fader setup/lighting, not any of the other options. 

    read more...
    0 6
    • jffry101
      PedroRodrigues Hi jffry101 Please consider that any profile you create will be able to store all the settings you need,how you require for any particular tasks. You will not be bale to share the MIC level between profiles but you must set up the same MIC level on each profile.
      • Sep 14
  • New
    AirPlush
    Newcomer - Level 1
    2021-08-29

    Product: GoXLR
    App/Firmware/Dice version info: App:1.3.3.130 Firmaware:1.3.29.81 Dice:1.2.15.77
    Summary of Issue: I am using shure sm7b and seems like i am getting a lot of background noise when i speak into my microphone
    How long have you had this issue: about a month or so
    Steps you have taken to fix your issue: messed around in goxlr setting for the mic, messed with windows setting swapping things around, can't remember everything i've tried. moved the goxlr around. changed power plugs where it was plugged in at. swapped usb plugs. i've unplugged everything besides headphones, usb and power to eliminate as much interference as possible.
    Full explanation of your issue: just irritating background static noise. My room is pretty quiet i've turn off everything, AC included and turned my fans down low and it's just constantly picking up this weird weird static type background noise whenever i speak. so gate isn't helpful. seems to be about the same volume as my voice.
    How many PC's are in your setup: 2 pc, but problem persists even on single
    What Microphone are you using? sm7b Are you using a cloudlifter/dm1? i've tried with and without the cloud lifter, using phantom power with the cloud lifter as needed
    What types of headphones are you using: wireless but has a 3.5mm razer blackshark v2
    What motherboard are you using: dark hero x570

    read more...
    0 23
    • AirPlush
      ChrisEdwards1 Hi AirPlush, I can see you have opened a technical support ticket for this issue also. I have added these details to your ticket and a response will be sent shortly from the ticket. Please keep an eye on your spam/junk folder as occasionally we have noticed our replies route to these locations.
      • Aug 29
  • New
    FeelTheFlow
    Newcomer - Level 1
    2021-08-19

    Hi,

    I recognized the blender does provide a MIDI Interface which is shown in the devices list in windows (and e. g. reaper). I found no documentation about it. Does anyone know what it’s good for?

    Thanks
    Florian

    0 33
    • FeelTheFlow
      PedroRodrigues Hi FeelTheFlow please consider that regarding the Blender all the ADC operation is done exclusively via USB and does not offer any MIDI over USB platform on that stage of operation, the MIDI over USB operation present on this unit is exclusively for firmware update using MIDI OX tools. Thank you
      • Aug 19
  • New
    AlexNotTheLion
    Newcomer - Level 1
    2021-07-05

    I really like the GOXLR mini, after trying loads of different pre amps and gates / channel strips for my mic its just about the only thing i found which works for a really great price! however, my set up for it is complex and due to the way its set up i cant use it to its full capacity (for some background i stream on twitch via obs studio), my input chain is as follows: shure s7mb > go xlr mini > pc

    this works and is great as an input, my issue stems from output which i personally have two issues with, 

    1. i like to keep my own listening volume sepparate from stream volume, with the goxlr this currently isnt possible as far as im aware, if i were to use all the faders and output to stream mix, if i decreased the volume on a single fader, i have no way to compensate for that in obs, this could be fixed by optionally outputting the channels sepparatly as well as a combined "stream mix" , so currently i am only using a single fader to output music only to stream mix, so if the volume is too low for stream, i can increase it in obs without affecting my listening volume.

    2. i use a external dac and headphone amp which makes routing output from the goxlr a bit of a pain, currently with the single fader im using, with voicemeter i take the streammix input and output it to my dac > headphone amp > headphones which isnt a great chain, i'd really love to see a feature either in a new go xlr to have lossless clean usb output, or have a software update to output to a specific device or again having seppareted channel outputs would allow me to fully use the faders to control my own volume sepparate from obs' output

     

    other than those personal problems, i really love the goxlr! i think its a fantastic product and in more simple setups works really really well

    read more...
    0 72
    • AlexNotTheLion
      TC Helicon Hi AlexNotTheLion, great to hear from you! Thank you for your incredible support! This means a lot to us.
      • Jul 23
    • AlexNotTheLion
      PedroRodrigues Hi AlexNotTheLion, I will leave you below a full GOXLR set up that will be helpful on this matter, information that involve OBS may be better answers by the OBS developers, so I would advise you to contact them directly.
      When it comes to using an external DAC, please take in to account that the GOXLR is a ADC and it will not be possible to use both unit at the same time as the GOXLR was developed to manage all aspect of the digital audio conversion and routing both unit as you have described just diminishes in a big way all the tools the GOXLR can offer you accompanied with an huge increase in the complexity of the set up.
      As I said on above please set up your GOXLR as stated below and you will have a huge amount of tools and processing power available for a seamless integration with any Broadcast tools.
      Please confirm that you are connecting the unit directly to your computer via USB 2.0 port avowing any USB HUB’s and any USB adaptors.
      Please confirm that you are you using a 1 x 1/8" TRS, stereo to connect your headphones?
      Are you using a headset? If you are please see the connection diagram below:
      (PICTURE 1)
      Please check the video below that will be very useful on this matter:
      https://youtu.be/7aNajiA_exw" target="_blank" title="https://youtu.be/7aNajiA_exw" target="_blank" title="https://youtu.be/7aNajiA_exw">https://youtu.be/7aNajiA_exw">https://youtu.be/7aNajiA_exw">https://youtu.be/7aNajiA_exw
      I would also suggest uninstalling the GO XLR APP and the install the lasted version available version 1.3.3.130 that you will find by following the link below:
      https://www.tc-helicon.com/tchelicon/product?modelCode=P0CQK" target="_blank" title="https://www.tc-helicon.com/tchelicon/product?modelCode=P0CQK" target="_blank" title="https://www.tc-helicon.com/tchelicon/product?modelCode=P0CQK">https://www.tc-helicon.com/tchelicon/product?modelCode=P0CQK">https://www.tc-helicon.com/tchelicon/product?modelCode=P0CQK">https://www.tc-helicon.com/tchelicon/product?modelCode=P0CQK

      When it comes to configure the GO XLR instead of showing up in your computer’s operating system as a single device with multiple inputs and outputs, GO XLR shows up in your computer as several different audio sub-devices dedicated to different elements of your overall livestream.
      Sound>Playback Tab These different sub-devices will each appear separately in your PC’s
      Sound>Playback tab:
      (PICTURE 2)
      These Playback sub-devices carry the following types of audio information:
      Chat—voice chat audio from services such as Discord or Skype
      Game—audio from your videogame, such as explosions, special effects sounds, or alert noises that originate inside the game
      Music—audio from music applications running on your computer, such as Spotify, Windows Media Player or iTunes
      Sample—audio that has been sampled in GO XLR plays back into your stream over this channel
      System—this channel serves as a catch-all for when perhaps you have a particular video game that won’t allow you to choose a specific output device
      To set up your audio devices in the Sound>Playback tab, use the right-click option on your mouse to take the following assignments:
      set up the System channel as your overall Default Device
      set the Chat channel as your Default Communications Device Once assigned, the system will add a green check mark and text label to mark each of these devices:
      (PICTURE 3)
      Similar sub-devices also appear in the system Sound>Recording tab in order to make your livestream audio available for recording.
      These Recording sub-devices carry the following types of audio:
      Broadcast Stream Mix—the final stereo mix that contains audio from all sub-devices combined into a single stream
      Chat Mic—audio from your personal chat mic (chosen as the Default Device via the right-click function)
      Sample—sampled audio from GO XLR plays back and can be recorded using this sub-device
      (PICTURE 4)
      Once each of these sub-devices has been set up and assigned to a GO XLR slider, each slider on GO XLR can independently control its assigned audio device.
      Each slider may then be used to adjust that device’s volume within the final livestream stereo mix. To further illustrate this separate-and-mix concept, if you feel that your Chat audio is too loud, you simply reach out to the assigned slider on your GO XLR and move the slider downward to decrease the Chat volume relative to the Game, Music or Sample audio.
      If the Chat audio is too quiet, you can reach out and move the Chat slider up to increase the Chat volume or you may also grab the Game, Music and Sample sliders and move those sliders downward to decrease those sub-devices’ volume relative to the Chat audio.
      As last to avoid an unintentional doubling of your audio, you will need to go into Windows under the Sound>Recording tab and make sure that the Windows “Listen to this device” option is switched off for your designated Default Device.
      The “Listen to this device” option is the internal method by which Windows allows you to monitor audio, but the processing latency inside your PC is slower than GO XLR’s internal audio processing, and so this slight delay inside the PC can create an unintentional doubling of the audio.
      To de-select “Listen to this device,” follow these steps:
      Open the Windows Sound control panel.
      Click on the Recording tab.
      Right-click on your designated Default Device.
      Choose the Properties option from the pop-up menu.
      Choose the “Listen” tab in the Properties pop-up window.
      Find the “Listen to this device” option.
      Make sure “Listen to this device” is UN-CHECKED

      Thank you
      • Aug 4
  • New
    cow1970
    Newcomer - Level 1
    2021-07-07

    Hi all

    Wondering if any is kind enough to help.

    Im having issues getting any sound from my blender. I have drivers installed and can see it is connected via the app. Using Win 10 and Ableton 11. Trying to get some Korg Volcas to 'sound' but nothing. In fact since buying it I have only ever been able to use it via headphones.

    In truth I dont understand this at all. Struggling with connections for a wide range of kit.

    So how does anyone using this kit for ableton and external synths get sound in ableton?

    Thanks

    Matthew

    read more...
    0 36
    • cow1970
      NicJonesMT Hi Matthew. Can you please submit a technical support ticket and we will then be able to advise you further.
      Simply click support at the top of the page and scroll down to the tech support option.
      • Jul 8
  • New
    Mark77
    Newcomer - Level 1
    2021-06-17

    Hello, their appears to be a connection problem with my go for mini, the headphone jack makes an buzzing sound, once I plug my headphones in, I have tried 3 pairs and still get the same sound, please can you help 

    0 43
    • Mark77
      DavidKnighton Hello Mark77,
      Your unit may need service to correct the buzzing issue. Please click the SUPPORT tab at the top of the page and submit a TECH SUPPORT ticket.
      • Jun 17
  • New
    Bradautry
    Newcomer - Level 1
    2021-06-14

    This is not a new request or suggestion.  I've read comments in YouTube videos from months/years ago, but I couldn't easily find a topic here to chime in on, so here I am starting one.

    I'd love to see Mic settings have their own profiles.  It's not just about separate/unique microphones; for me, it's not at all about that.  I only make use of one mic.  But...

    My wife uses my PC, her eq and compression settings are vastly different than mine.

    My daughter uses my PC for virtual guitar lessons.  Obviously, playing guitar is a completely different use case than spoken word.  

    It's a hassle - not an insignificant one - to change pretty much every mic setting each time someone different will be using the GoXLR.

    Is there a technical constraint that makes it not possible to save different mic setting profiles?

    Thanks in advance.

    read more...
    0 54
    • Bradautry
      PedroRodrigues Hi Bradautry thank you for your comment please consider that I will forward your request to our Dev. Team but it may be also beneficial to check the TC HELICON GAMING DISCORD CHANNEL where we have a fair amount of discussions on this unit, we present solutions and also features new request and news. Thank you
      • Jun 16
  • New
    UTAC
    Newcomer - Level 1
    2021-06-15

    Not a technical issue, please direct me to where this question would be more appropriate:

    How do you set the default control tab in the GOXLR app interface upon open? Currently, it's the Mixer control tab that displays, and I would like it to default to the Routing control tab. Perhaps an .INI file somewhere I could edit?

     

    Thank you.

    read more...
    0 70
  • New
    swanny9
    Newcomer - Level 1
    2021-05-17

    Can someone tell me the best way to record audio using Blender on PC or Android phone  ( not garageband) ? i have tried apps and software including  ...audacity,wave pad  etc...they recognise the usb drivers but still does not record???

     

    Anyone recommend what to use and how to go about it!!

     

    Many thanks and God bless

    read more...
    0 59
  • New
    radioman47
    Newcomer - Level 1
    2021-05-14

    This still apears to be part of your range but UK stock is just not available. When and with whom can we expect to see stock in the UK?

    0 58
    • radioman47
      NicJonesMT Hi Radioman47.
      Unfortunately as we Don't sell products Directly to end users we can't comment on the stock levels of our resellers.
      All we can advise is that you use the following link to directly contact our official resellers and ask them when they can expect stock of this unit.

      https://www.tc-helicon.com/buy.html
      • May 14
Go to page