Statistics

242,677 members
119,071 posts
  • river1980
    Contributor - Level 1
    2012-08-16
    Hello out there TC users!

    excuse my ignorance but I `ve just bought a G Natural and am having some problems engaging the tap tempo feature

    the manual only hints at what to do

    would someone please be kind enough to help me through this process

    thanks

    Jerome
    read more...
    0 4,323
    • river1980
      TC-Mike Hi Jerome,



      the Boost and Tap tempo function share the same switch and by default to "boost" is active.

      In the Utility menu of your G-Natural you find the "Footswitch" parameter that can be set to "Tap tempo".



      If you set delay times and modulation speeds of your presets to a note value, they will follow your tapped tempo, so it is easy to allign your timebased FX to different tempi.



      Best regards, Mike
      • September 3, 2012
  • josuezin25
    Contributor - Level 1
    2019-06-30

    Hello.

    I´m trying to record my drums with the Q1002usb but, the CUBASE dont recognize the interface, i have al ready install ASIO4ALL in the download section in behringer.com.

    Can you help me to know how to setup the Q1002usb in my computer and let me know if i need some extra drivers or something because im a litle bit confused.

    im trying this in windows 10 and my pc dont detect or enable the dispositive.

    Best Regards

     

     

    errorq1002usbdontrecognize.png
    read more...
    0 71
    • josuezin25
      RichardYClark Uninstall ASIO4All as this may confuse your PC. Win 10 should be able to use the normal Windows USB audio drivers to feed into Cubase. Can you see the interface OK in Windows Sound set up page?
      • June 30, 2019
  • TCH-Paula
    Triber Alumni
    2019-07-04

    Why do we do what we do? Why was Adaptive Tone created? Get an inside look into TC Helicon from Senior Development Engineer, David Hilderman who's been empowering voices for nearly 20 years.

    0 198
  • Moblin
    Contributor - Level 1
    2016-07-04
    Hey, so quickly:

    Using a ditto looper, guitar, amp. Signal chain works fine with:

    Guitar --> Looper ---> Amp

    As soon as I press the looper pedal on the actual looper, it stops the signal chain and I don't hear anything out of my amp, including any loops I made. Basically everything works fine until I actually start a loop.

    Any ideas?
    read more...
    0 1,243
    • Moblin
      BigJR Hi Moblin,

      Mine was working yesterday then today it started doing exactly what you are describing. I am really hoping TC explains how to fix this issue. SO disappointing!
      • July 20, 2016
    • Moblin
      Squidmole I had the same issue as well. It turned out to be power supply related. Try a Boss PSA 120 and you should be golden.
      • July 20, 2016
    • Moblin
      BigJR This CANNOT be power supply related - I used a separate power supply and then also used a VoodooLabs ISO 5 and still the problem persists. When is TCE going to acknowledge they created a bad batch of Dittos and offer a callback replacement?
      • July 21, 2016
  • Khanjimong
    Contributor - Level 1
    2019-08-19

    Hi,

     

       I am from Nagaland, currently looking our for Music Tribe products authorized distributors In India for a Major Project. Kindly assist.

    0 328
  • BenMiller
    Contributor - Level 2
    2017-04-14
    Does anyone know if it is possilbe to assign a mixbus (or several) to the ADAT outputs of the S32? Thanks in advance!
    0 1,973
    • BenMiller
      Paul_Vannatto Hi Ben,



      If you look on the back of the S32, the ADAT ports are labeled as AES50 17-24 and AES50 25-32. That would mean that you would assign the various mixbuses to 3rd and 4th AES50 banks.
      • April 14, 2017
    • BenMiller
      Roblof Not directly, but you can do it by using the p16/ultranet and/or out1-8,9-16 routing options and use these as a source in aes50 routing.
      • April 14, 2017
    • BenMiller
      BillHood If I could go ADAT out from my S16 into a multi-channel headphone amp, and route some monitor mix buses to that headphone amp for 3 of my band mates I could get rid of a heavy stage snake I use.



      Anybody heard of a headphone amp that accepts ADAT from s16?
      • April 14, 2017
    • BenMiller
      LucHenrion It's a good way to use an old ADA8000 again: it would convert ADAT to analog at line level. From there, any headphones amp would do the job. Be careful however with long ADAT cables: normally, you shouldn't use more than 5 meters, I've had success with 10 m cables but it's risky... I wouldn't use this in a "live" setup
      • April 14, 2017
    • BenMiller
      GaryHiggins

      Bill Hood;121716 wrote:

      Anybody heard of a headphone amp that accepts ADAT from s16?




      How about using an ADA8200? Pretty cheap, Midas designed preamps for other uses. Whatever is assigned to aes50 17-32 out of the X32 is what appears at the adat outputs of the S16. Set up one of your out 1-16/p16 or aux out menus to send whatever mixbus etc you want and assign that category to aes50 17-24 or 25-32. Use adat 1-8 or 9-16 out of S16 to adat in of ada8200 then you get those 8 choices from the xlr outs of the 8200 to a headphone amp or wherever.
      • April 14, 2017
  • EdmundoCassis
    Contributor - Level 3
    2017-12-13
    Hi! I'm close to lost my HD. I would like to backup my own Deepmind 12 presets but i can't find where is the Deepmind 12 app folder to copy to an external HD. Could someone help me in this? I'll really appreciate. Thanks!
    0 616
    • EdmundoCassis
      IvoVos You can find them in


      \Users\

      \AppData\Roaming\PHAT12\banks



      for instance :

      C:\Users\JohnUser\AppData\Roaming\PHAT12\banks

      • December 20, 2017
  • Firemangib
    Contributor - Level 1
    2019-09-21

    So I bough a GoXLR. Unfortunately in an unrelated issue, the 3.5mm headphone jack is faulty so I’m having to return and replace.

    Anyway, I seem to get quite a bit of background static from the mic, I’m using a shure sm7b and have the gain set to around 60.

     

    is there anything I can do to lower this static noise?

     

    maybe my wireless mouse and keyboard are affecting it?

     

    what do you guys think?

     

    thanks all, 

     

    Gib

    read more...
    0 309
  • Elemer09
    Contributor - Level 1
    2019-10-01
  • JeffreyMilkey
    Contributor - Level 2
    2019-10-15

    I'm hoping someone else had this problem and resolved it. I have a fairly complex setup but I think I only need to describe part of it. 

    I have a VL3 running Dual Mono Out, Neumann KMS 105 and Acoustic Guitar in. 

    My XLR cables Mogami into a Bose TS8. 

    Set up this way everything sounds perfect. 

    If I plug anything else into the Bose Mixer not immediately  but within 10 to 20 seconds I get a terrible Loud Digital Noise almost like a cord shorting out. 

    I tried different mics, different cords, different channels, muting.....nothing works, the noise keeps happening until I unplug whatever else is plugged into the BOSE. 

    I have replaced the mixer, I bought a second VL3 and tested it and I get the same results. 

    Any ideas?

    Jeff

    read more...
    0 97
Go to page