290,000 members
172,584 posts
  • jnew
    Contributor - Level 1
    0 679
    • jnew

      Hey Guys, 

      New member here with first post. I just bought a TC Electonics Brainwaves and am trying to figure out how to do a very simple effect with it. For the time being I just want to run it mono with a detune effect. I just want the dry signal and 6 or 7 cent effect on it. No delay, no repeats, none of the 2nd's, 3rds, 4ths or other semi tones or octaves. Just a straight forward 6 or 7 cents that I can mix in. I drove all over this town to find the appropriate cable and have downloaded the tone print app. But I can's find where you can set individual cents. Can anyone help? Thank you,


      • June 7, 2020
  • jasbirnandra
    Contributor - Level 1

    I am interested to buy speakers from tannoy as there are no dealers here want to contact them and do not have any contact details can someone share the same, please.




    0 485
  • beatnut88
    Contributor - Level 1


    My equalizer is making loud crackling noises in the right channel. the left is fine.

    I run Mediaportal off a Windows PC which is connected to the Yamaha RX-V871 via HDMI.

    This in Turn is connected to a Denon Amplifier withe the equalizer in between (so I can get surround sound and use the equalizer for the main 2 speakers only) The Yamaha has no loopback facility.

    any help appreciated!


    0 135
  • Dfryer
    Contributor - Level 1

    One of my speakers (Eurolive VS1220) stopped working. Nothing is coming out. What could be the problem and can I fix it?

    0 106
  • New
    Newcomer - Level 1

    Good Day, guys! I'm just asking how to order parts from Behringer?

    0 15
  • Ski_leigh
    Contributor - Level 1

    Hi, I'm after some touch up espresso paint for my DC6T SE floor standing speakers that have had some slight damage. Is this something than can be order as a service part.

    0 109
    • Ski_leigh


      Hello Darren, welcome to the community.


      I suggest that you raise a Care ticket for Spare Parts explaining your requirements. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • March 16, 2020
  • New
    Newcomer - Level 2

    I run the sound at church and know very little about what I am doing. We have had this mixer for about 1.5-2yrs. The issue has been on and off but continues to get worse. The mixer generates its own WiFi that we connect to with an iPad. Very often the iPad will not connect. Sometimes it won't even be able to find the XR WiFi. 

    We have tried a few different troubleshooting ideas and nothing helps. There is nothing else (phone or computer) trying to connect to the WiFi. We have also tried other iPads. What am I doing wrong?

    0 133
    • Fbch
      Nigel67 The XR16 internal wifi uses the 2.4GHz frequency which is the most common and it could be that with all the mobile phones around, etc, the frequency is becoming log jammed. Have you tried using an external router which also uses the 5GHz frequency. This also gives the advantage that you can place the router higher up as having the antenna low down will also affect the wifi range. Please see this video that may be helpfiul.
      • July 21, 2021
      • Behringer x air 16 not connecting to ipad
        Fbch I will try that this week. I have an Ethernet cable run to the sound board but I do not have a computer over there. So if I connect the mixer to my modem, I can connect to the app via the church WiFi? (Like I said, most of this goes over my head)
        • July 22, 2021
    • Fbch

      Hi Fbch. many apologies for the delay in getting back to you. For some reason I only received the notification that you had replied this morning. How did you get on connecting to the wifi. I would advise probably using a separate router rather than the church wifi. if you don't move around the church, have you thought about getting an adapter for the ipad so that you can connect it directly to the ethernet port and charge at the same time. You can purchase Lightning to ethernet port adapters which also have a power adapter as well. A long as the ipad isn't moved around a lot for the cable to be pulled out, then this would probably be your most secure connection followed by the external router.

      • July 29, 2021
  • Cherner
    Contributor - Level 1

    Hi does anyone know if this europower ep2500 amp can run in 4ohm

    0 128
  • New
    Newcomer - Level 1

    Hope all y'all are safe and healthy


    From an auiophile in New York City

    in 1967 bought two(2) used - and wonderful

    Tannoy Speakers

    about 35"H x 14"D x 24"W


    I hope someone could please help - thank you

    How do I find:

    * The Model #

    * Model Name

    * Serial #

    * Year Manufactured 

    * How many were manufactured

    * Performance Specifications

    Is there anything which needs to be done

         after ten(10)-years of storage

         to ensure everything is perfect ?


    Thanks very much

    Ed Staley


    Please email me:

    [email protected]


    678.444.9896<-Direct Cell

    Thanking everyone for your most kind helping hand





    View Attachment

    0 53
  • charles000
    Contributor - Level 2

    OK, I'm just getting started in all this -
    how do I combine the Behringer X-TOUCH ONE with my Korg DW-6000 midi synth keyboard and DAW on windows 10 . . . any simple clear instructions on this would be very much appreciated

    I like the concept / design features of the X-TOUCH ONE, but would like to find out if I can actually use it in this configuration.




    0 609
    • charles000

      Hi Charles ( @charles000 ), 


      Welcome to the community.  Since most setups are specific to the DAW you want to use, we'll need to know what DAW you'll be using before we can help. 




      • August 2, 2019
    • charles000

      OK, fair enough, very much appreciate your response.

      I've been tinkering with MixPad just to get used to working with a DAW, loading up various VST modules and so on, but now want to focus on a more serious type of DAW.

      So far my choice has narrowed down to Cubase or Reaper . . . both of which have interesting features and can utilize a vast collection of compatible VSTs.

      With either of these, can the X-TOUCH ONE interface with those DAWs and my ancient (but still very much working) Korg DW-6000?

      Again, your help help is very much appreciated.



      • August 2, 2019
    • charles000

      Hi Charles, 


      I've been a long time Reaper user so I'd recommend you download the fully-functional version and give it a go during the very generous 60-day trial period.  I use a full size X-Touch with Reaper so I haven't looked at the status of the XT1 support but I'll do that this weekend.  As far as the DW-6000, you'll need to get a MIDI interface for your computer in order to get MIDI in and out of your DAW.   It should work fine with Reaper. 


      I'll be in touch, 



      • August 2, 2019
    • charles000

      Thank you for the info!

      So, I'm going to try the Reaper.

      As for MIDI interface, I was looking at some of the Bheringer products - 

      Behringer X-TOUCH ONE seems intriguing, but might be overkill.

      If you happen to have a suggestion for the MIDI interface, nothing too fancy, I'll probably just go with that.

      Many thanks


      • August 2, 2019
Go to page