Statistics

289,809 members
172,366 posts
  • New
    jacksonmanson87
    Newcomer - Level 1
    2022-01-20

    You are using your orbi device effortlessly. But at some point you are seeing orbilogin.com not working window on your screen. In case if you are facing the orbilogin.com not working error, you can fix the issue by following few basic troubleshooting steps:

    • Make sure that the orbi router is properly connected to the power source.
    • Ensure that your device is connected with orbi network or LAN port.
    • You can try to power cycle your orbi router, modem and satellite.
    • Try deleting all the cookies, cache and history of the browser you are using.
    • If this does not work, you can change the web browser and try using another browser.
    • You can use the IP address of orbilogin in case you fail to login with the default web address.
    read more...
    1 47
  • Ratnaguna
    Contributor - Level 1
    2019-11-20

    I'm trying to set up my new equalizer but have discovered that the RCA inputs are a little too wide for the plugs! Which means that the plugs slip out of the inputs. Should I return it, or is there a remedy?

    0 188
    • Ratnaguna
      KenMitchell

      Hi Gary ( @Ratnaguna ), 


       


      Welcome to the community. This is usually caused by a worn out cable not the input jacks themselves.  Can you take a picture of the plugs and jacks so we can have a look? 


       


      Ken

      • November 21, 2019
    • Ratnaguna
      clif

      When this happens to me , I take a pair of needle nose pliers or a pair of small wir cutters and put a slight kink/bend in the RCA plugs outer shell in order to get a tight fit.  The RCA plugs center pin usually fits tight enough to not bother with. 

      • February 10, 2020
  • DblMoonChild
    Contributor - Level 1
    2019-08-20

    Hey all! New to this, please be patient. 

    I Just purchased a pre-owned VLTouch2. When I received it all of the presets have been erased and I’m wondering if there is a way to restore these? Are they downloadable once I have the unit up to my computer for updates? Any tips or tricks would be appreciated I am new to this piece of wonderfulness and my hands

    read more...
    0 383
    • DblMoonChild
      TCH-Spencer

      Hey @DblMoonChild,
      Welcome to the fold!  You can use our free VoiceSupport 2 software to update your Touch 2, manage presets, and download new presets from our Cloud library.  To restore factory presets, all you need to do is use VoiceSupport to "delete" whichever preset(s) you're trying to restore, and the factory presets will repopulate themselves.  That is to say, the first 200 preset slots can never be empty, they either contain their respective factory preset, or they can be overwritten with user presets, and deleting those edited user presets will restore the slot back to its factory preset.  Experiment lots, store your own edited presets, and also check out the additional presets you can download from VoiceSupport.  Cheers!

      • August 22, 2019
  • Dreamstone
    Contributor - Level 1
    2020-05-12

    Hello,

    I recently bought the Behringer UM204 to connect my guitar. And it works great!
    Besides that, the interface is placed on my Home Theater PC and connected to my Denon AVR via TS (Behringer's main Outputs) to RCA cable like down below to listen to FLAC music.

    Is this connection right? or should I use the Monitor outputs on the back of Behringer?

    I am asking this because the AVR is not working till last night, And the usual suspect looks like UM204.indir (1).jpg

    Best regards,

     

     

     
    read more...
    0 109
    • Dreamstone
      RexBeckett

      @Dreamstone 


      Hello Sadas, welcome to the community.


       


      You could connect to the Playback RCA outputs but they are uncontrolled feeds from USB playback. The Main Out signal is controlled by the Mix and Main Out knobs so is more useful if you want to hear a mix of playback and your guitar input.

      • May 12, 2020
    • Dreamstone
      Dreamstone

      @RexBeckett 


      Thanks for your warm welcome.


      I do want to use the Main outputs of the UMC204 that's why I bought the cable on the picture. I am not a sound device expert, actually, it is my first audio interface that I have.


      My question is, is it ok to use TS to RCA cable on TRS output? It looks like working but TS cable shorts the R and S pins of the output. 


       

      • May 13, 2020
  • New
    JulesC
    Newcomer - Level 1
    2021-05-05

    Hi, first of all please excuse my total ignorance on this subject, but I have a VMX 300 USB, which my husband installed, linked into a small box labelled S.M.S.L (he passed away 5 years ago and the sound system has been in constant use daily), it appears that the speakers feed into the box which then supplies a CGV television controller plus the amp .. all that this small box appears to control is the sound level ... this small box has stopped working, it alluminated as usual this morning, but at some point when I was not in the room it must have failed (or possibly a problem with the transformer?).

    Would I be safe in assuming that I could bypass this box and connect the speakers directly into the amp? I don't want to matters wose!?

    thanks for any advice anyone can give me,

    Jules

    read more...
    0 51
    • JulesC
      JulesC ps I'm so stupid .. apparently the VMX 300 USB is just the mixer, any advice on what I should replace the amp with?
      • May 5, 2021
    • JulesC
      Nigel67 Hi JulesC. I am not sure that we are going to be able to help you but can you send a picture of the S.M.S.L device and does it have another name (model number) on it. I think you will probably have to go to a hi-fi store for their help, but I will try and help you further to see if we manufacture anything similar. S.M.S.L is not manufactured by us but a Chinese Company from searching the internet. You may be able to purchase a direct replacement from them https://www.smsl-audio.com/#firstPage
      • May 9, 2021
  • clif
    Contributor - Level 2
    2020-02-10

    I have 2 Behringer MX882 Ultra Link Pro mixer splitters and the audio level LED display lights up to 0db on all channels with no audio input.  Slight hum audible in the audio output channels when audio is present. Need schematic of at least the power supply section.

     

    MX882.jpg

    read more...
    0 383
    • clif
      AlexLane

      Hi Clif, 


       


      Please contact CARE through the support portal, thanks.

      • April 7, 2020
    • clif
      clif

      Ive tried everyway possible to a) contact Behringer directly, b) contact anyone who might have a similar problem, c) contact anyone who can supply repair parts for Behringer products


      All I get for my efforts is a total run around.  I have opened 5 support tickets but the
      Care Portal shows all of them as "problem solved"  I have never even come close to a solution nor received any feed back from anyone from the Music Tribe forums.  Does anyone really ever get help on this site?


      Right now it looks like I need a power transfromer for my Behringer MX822 but havent a clue as to how I would get one via the Music Tribe or the Behringer support web site.

      • April 27, 2020
    • clif
      RexBeckett


      @clif wrote:


      Ive tried everyway possible to a) contact Behringer directly, b) contact anyone who might have a similar problem, c) contact anyone who can supply repair parts for Behringer products


      All I get for my efforts is a total run around.  I have opened 5 support tickets but the
      Care Portal shows all of them as "problem solved"  I have never even come close to a solution nor received any feed back from anyone from the Music Tribe forums.  Does anyone really ever get help on this site?


      Right now it looks like I need a power transfromer for my Behringer MX822 but havent a clue as to how I would get one via the Music Tribe or the Behringer support web site.





      @clif @AlexLane 


      If you let us know the Care ticket numbers, Clif, I'm sure Alex will be able to find-out why they were closed without your problem being resolved.

      • April 27, 2020
    • clif
      clif

      Found the problem!


       


      the 2 units Ihave were wired for 220V operation but had a US 120V plug installed.


      I rewired the power transformer for 120V operation and the LEDs acted normal.


      The issue was that the circuitry wasonly getting 10V DC to the circuit boards, not evenclose to the 18V it needed for the regulators to work.


      If you have my problem, read the units top cover and see what voltage it was made for. 


       


       

      • April 27, 2020
  • New
    grzegorzziola65
    Newcomer - Level 1
    2022-04-20

    Dzień dobry, kupiłem u was 20.04.2022 plug in Teletronic MD4 NATIVE, nie otrzymałem faktury zakupu, bardzo proszę o przysłanie mi faktury zakupu na maila. Załączam wiadomość którą otrzymałem po zakupie ale faktury tam nie było.Bardzo proszę o pomoc, potrzebuję ten rachunek.

    read more...
    0 7
    • grzegorzziola65
      RobbyWingfield Hi grzegorzziola65, Robby with Music Tribe here, please submit a support ticket at the link above and I will get an invoice generated for you. Please include your business name, address, and VAT that you would like reflected on this invoice.
      • Apr 27
  • texritter
    Contributor - Level 1
    2019-07-30

    Just inhereted a nice pair of Revolution XT 8F's. There are no signs of the floor spikes or protectors anywhere. Where can I purchase a replacement set of said floor spikes as the speakers seem a bit unstable without them.

    I'm located in Scotland in the UK

    Thanks in advance

    Tex

     

    read more...
    0 301
    • texritter
      Mayank

      Hello, have the same speakers. Simply brilliant. Iam looking for the original spikes too. Location India.

      • February 3, 2020
  • rudomat
    Contributor - Level 2
    2019-11-04

    i´m searching for a product like the HA4700, but much smaller...i only need one stereo jack input, a headphone output, a pan pot plus a mono switch...

    i need it for the drummer, who gets the playalong files with the band panned to the left and the metronome to the right...so he can make his own mono mix...is there a smaller unit to make this possible...?

     

    thanks!

    read more...
    0 110
  • Alexis_c_l
    Contributor - Level 1
    2020-02-29

    Hi, I'd like to change the main speaker for my Tannoy Mercury 7.2. Where could I find that part?

    0 146
    • Alexis_c_l
      RexBeckett

      @Alexis_c_l 


      Hello Alexis, welcome to the community.


       


      I suggest that you raise a Care ticket for Spare Parts explaining your requirements. This is done by clicking on Support at the top of the page and then clicking the Create a Care Ticket button. This is only possible if you have completed all the required fields in your profile. Make sure that you fill-in every required field on the Care form.

      • February 29, 2020
Go to page