293,460 members
176,453 posts
  • New
    Newcomer - Level 1

    Just received my VL3X and have explored voicesupport2 a bit. I see presets that I used with my Voicelive Touch 1 that are listed in the voicelive 2 presets library.

    I know the how to get these presets onto my unit.

    My question is,can all voicelive2 presets be edited globally on the VL3X?

    As a starting point,I'm trying to set a master sound for my acoustic guitar on the GLOBAL PRESET to use on basically all my tunes.I've been trying to pull a delay setting from GLOBAL to use on the VL2 POP DUO preset and as I go back and forth the delay millisecond setting keeps changing.

    I just want to be sure the issue is occurring "between the chair my VL3x." and is not a crossover preset issue.

    Again can all VL2 presets installed on a VL3X from Voicesupport2 be edited by pulling from the VL3X GLOBAL master guitar setting? 

    0 73
    • brynnerhead1
      brynnerhead1 Never mind and sorry folks! The problem WAS indeed occurring between the chair and the VL3X. I figure out what step I was leaving out.
      • January 22, 2021
  • New
    Regular Contributor - Level 1


    I've been asked to do a virtual performance at a hospital. Never done this before and was hoping that someone who has, could kindly point out some do's and dont's. Especially someone who has used their play acoustic to do so. I'm pretty sure they will supply a windows laptop, and will be using webex. I'm guessing that webex is very similar to zoom.

    I've had the playacoustic hooked up to my own windows 10 pc and the first thing I noticed, was the very low output using the usb. With the usb level maxed out in the playacoustic, I can't see anyway to increase the level. The other obvious problem was when I routed the audio to the pc headphone out, the latency was terrible. I can of course use the playacoustic's headphone to monitor, but I'm guessing that I'm going to look like I'm terrible at miming. As bad as the dubbing on a Kung Fu movie. I'm guessing no, but is there a way to get the latency down?

    Thanks in advance.


    BTW. What on earth has happend to the TC Helicon user forum? This music tribe thing is a nightmare! I searched for play acoustic and only got 4 pages of posts that were of no use to me. What happend to all the posts? So much good information from users and TC hellicon staff seems to have gone. Haven't seen the term " user forum " once, and I'm not even sure this post is going to go to the right place. In the drop down menus you have to select before you can post,  there is no mention of TC Hellicon let alone the play series.

    0 71
  • New
    Newcomer - Level 1

    Just bought a Behringer UM2 and would love to register it for warranty and downloads. It is not obvious to me as to how to accomplish this.  Thank you.


    0 107
    • fourstring71
      KyleJohnson Hello, Kyle here with Music Tribe. So submit a product registration please click on Support at the top of the page and then select Product Registration.
      • February 10, 2021
  • New
    Newcomer - Level 1

    With settings Tweed and Clean there is no noise...but swtching to BRIT or Calif using hi gain gives conitnous strong Hum/Rustle noise... While changing in MOD switch click /clip sound comes from speaker...kindly suggest a solution...

    0 10
  • New
    Newcomer - Level 1

    Hey is the download Audacity ok to trust?

    0 179
  • New
    Newcomer - Level 1

    every time I sing high the harmony does a funny sound does anyone know how to fix this

    0 50
  • New
    Newcomer - Level 1

    How can I run separate channels to my Bose T1 tonematch. I don't want to use the thru input for the guitar which would lose the harmony effect. I would like to use two channels on the mixer one for guitar and one for vocals both coming from the TC Helicon.  Thanks!

    0 24
  • New
    Newcomer - Level 1

    I just bought a Play Acoustic and am having some trouble getting a good sound with my Taylor GS Mini.  Is there someplace in the knowlege base where I can find good settings suggestions for this guitar?

    1 8
  • New
    Newcomer - Level 1

    Need to replace the internal knob on a TC Helicon Play Acoustic (Pic Attached.) Will likely have to solder on a whole new knob (I think?) Anyone done something like this before? Maybe possibly know a part number? Got any suggestions? Thank you!

    0 286
    • TMcMeen
      Nigel67 Hi TMcMeen. Please contact our spares department and they will be able to help you with part number, pricing and availability. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spare Parts tab and submit a ticket. A colleague will then get back to you with the relevant information. Many thanks
      • March 31, 2021
  • New
    Newcomer - Level 1


    Heureux possesseur d'un FCB1010, d'une GODIN (pour piloter mes synthés virtuels (Arturia) et d'un DAW "Studio One Pro 5.

    Quand j'appuie sur le switch "1" du FCB1010, je souhaiteai en plus d'activer "l'écoute" de ma piste sur mon DAW, ouvrir l'éditeur d'instrument. Pour résumer, un appuie sur une pédale du FCB1010, m'ouvre 2 fonctions sur mon DAW. Comment faire ?


    0 21
Go to page