Hi to all,
I'm sorry to complain about my new MS40 Near Field Monitors...
At a first hearing the speakers are extremely clear and have a crystalline sound, but when I rise just a little the volume (let's say 1/4 , 1/3 of total) I hear a strong mechanical vibration on bass frequencies on the right speaker... more udible on the rear of the loudspeaker.
The audition in headphone is instead perfect also with a loud volume...
Very displeasing and unexpectable on a Behringer product (even if in the low price zone ).
Can someone help me to solve the problem?

Good bye to everyone

Hi,

I've had my M32R for the last 2 years, extremely satisifed of it. I know and understands the routing of the system, did many recordings directly in my DAW (Adobe Audition and Pro-Tools) without any issues. I've updated recently the Firmware to 3.11 unfortunatly since then, no audio is coming in either both DAW's software. My system is a MacPro Late 2013 on macOS Mojave. The systems and the DAW's recongnise the DN32-USB with it's 32 inputs and 32 outputs, but no signal from the M32R comes in. As for playback from my Daw's software, both are running great. MIDI controls work perfectly also. So here's the question, Am I missing something or maybe a configuration in the new Firmware. Please need held.

Thanks!

Hey guys,

 

So I've got my X32 Rack + S16 fully functional now, and I can get everything to record just fine. My band and I rehearse and the levels are great in our mixes, ears, and mains, but the problem I'm having is that the inputs going to my DAW (Cubase 9) are all over the place when we record anything. I'm running a USB from the X32 card to my laptop.

 

Is there a way to compensate for this other than setting the gain per channel or changing the fader levels in the DAW itself?

 

Thanks y'all.

Hi Everyone,

  I recently got the M32 Live.  I am using the DAW remote for Pro tools 11.  If i move a fader on the M32 or in Pro Tools they mirror each other perfectly.  But that's about all I can do.  I tried something simple like panning a selected channel on the M32 and Pro Tools will not respond to this command.  I then went to encoder 1 bank A and it will do it for Channel one in PT, but encoder 2 will not do it for channel 2 in PT and on.  Even if that did work, I could only pan 12 channels on PT, since there are 3 bank sand 4 encoders on each.  Is there a way to pan PT from the M32?  It works for the faders, so PT must be getting the midi info.  I've tried all kinds of different routing options on the M32, but no panning.   I'd think this would be something pretty simple. 

Also, for no apparent reason, sometimes  one or two of the faders on the M32 start twitching on their own.  Has anyone experienced this?

Does anyone know how to use the panning as a controller for Pro Tools, without using the encoders?  I know it can be down on Logic X, you just have to put Logic in learn mode to learn the midi command being sent.

Thanks for the Help

 

 

Hello.

I´m trying to record my drums with the Q1002usb but, the CUBASE dont recognize the interface, i have al ready install ASIO4ALL in the download section in behringer.com.

Can you help me to know how to setup the Q1002usb in my computer and let me know if i need some extra drivers or something because im a litle bit confused.

im trying this in windows 10 and my pc dont detect or enable the dispositive.

Best Regards

 

 

errorq1002usbdontrecognize.png

I am using the X32 with an S16. I run my stereo in ears from the 1/4" aux outs and am having some strange panning.

With the Aux 1&2 linked I am getting the following.
Mono signals (drums) plugged directly into the X32 (1-8) I hear in center of mix
Stereo linked channels (keys) plugged into X32 (9-16) I hear in stereo
Mono signals (vocals) plugged into S16 on channels (19 & 20) are heard hard left and hard right.

Channels 19/20 are NOT linked.

When I unlinked the Aux sends to my in ears everything works as it should (however then I have to independently set levels for my left and right ear. hard to do on the fly while playing/singing, etc.

Does anyone know if there is a work around or if I take a regular bus output 1&2 and use XLR to 1/4" from X32 to my Shure in ears inputs?

I'm trying to use a x32 Producer and s16 as interface to record with Pro Tools. I have both x-usb and x-WSG cards. The problem I'm faceing is that I can't figure out how to monitor already recorded tracks and record at the same time. You know, like over dubbing and punching in. I also have a Powerplay HA6000 for the musisians. Ok, this is were it gets complicated. When I'm in record mode on the x32 I can't hear the already recorded tracks and when I'm in play mode I can't record. HELP!!!

Hi, I'm unable to patch my surface IO of my Midas Pro 1 to the Aes 50 IO in order to record in Nuendo 10. 

Also when I play back any audio in Nuendo at mote than -5db, the sound gets destorted although I've used the digital gain trim in the Midas console. Please help.