Statistics

249,554 members
126,577 posts
  • New
    cindysellers
    Newcomer - Level 1
    2020-11-27

    We have acquired two Eurolive B205Ds.  Can I connect them using XLR cable from Thru on the first unit to the Main in on the second one?

    0 92
  • New
    stangeo20
    Newcomer - Level 1
    2021-01-12

    I bought a new xenyx QX2222USB mixer, but the USB input is not working with MacBook air. Is there any driver that needs to be installed? However the output to the mixer is working through the macbook. I called Apple and they referred me to Behinger website. Please help?

     

    read more...
    0 189
    • stangeo20
      RexBeckett Hi stangeo20, the QX2222USB is CoreAudio compliant so should work with your Macbook without any special driver. Two things to check: Make sure that the red USB/2-TR To Main button is not pressed as this will mute the USB recording feed; Check the Mic Privacy settings on the Macbook to ensure that your recording software is permitted to use the audio interface.
      • Jan 12
    • stangeo20
      stangeo20 Here is what I found out.

      I was using Behringer Ultralink ULM 200M USB microphone when I created this ticket. So I found that when I use the USB microphone there is no USB Codec signal coming into my MacBook for recording. However I tested today with another microphone and used an XLR cable and the USB codec worked absolutely fine.

      This leads to my next question, the mixer I bought was because it works with Behringer USB mic input. How can this be resolved that I’m able to use both XLR cable inputs and USB200M microphones?
      • Jan 13
      • Behinger xenyx QX2222USB mixer USB issue
        RexBeckett It sounds as though there could be a problem with the ULM200M rather than the mixer. Try connecting the USB receiver to a PC to see if it works that way.
        • Jan 13
  • New
    linschen
    Newcomer - Level 1
    2021-01-13

    Hallo eine Frage ich möchte über mein Handy bei einer Plattform streamen die es noch nur für handy gibt, habe ein mischpullt Behringer Xenyx 1202 USB und ein XLR-Mikrofon Rode Nt1 und ein Handy Samsung Galaxy A 51. Brauch ich da einfach nur ein  Kabel Chinch zu aux das dann in ein Adapter und ins Handy oder reicht da ein Kabel und das dann im Audio Buchse? LG

    read more...
    0 68
    • linschen
      Nigel67 Hi. You can purchase a cable that has a mini jack on one end for your phone headphone socket, which Y splits to 2 TS jacks which you can then plug into a stereo input on your mixer. Hope this helps
      • Jan 17
  • New
    tazzboy
    Contributor - Level 2
    2020-11-29

    I was wondering is it possilbe to hook the Motu 8pre with USB into the Behringer X-Touch usb port ?

    0 145
    • tazzboy
      DaveMorrison Are you asking about connecting the 8Pre's USB cable into the Built -in USB hub on the X-Touch so you have just one cable going to your computer? If this is the case case, the answer is Maybe. I've had good luck connecting audio interfaces through the hub on the X-Touch, but not everyone has. It depends on the computer's USB ports, the Audio Interface's USB interface, the USB cable, and some luck. In theory, it ought to work, but you have to try it on your system to know for sure.
      • November 29, 2020
      • Motu 8pre usb into Behringer X-Touch
        tazzboy Yes that is what I am asking the USB on the Motu is 2.0 So I was wondering since I have read on the manual that you can plug in a keyboard and mouse that has USB capabilities I thought I would ask to find out if you can do the same with a Preamp audio interface.
        • November 29, 2020
    • tazzboy
      DaveMorrison Give it try. You won't hurt anything and it might work for you.
      • November 29, 2020
      • Motu 8pre usb into Behringer X-Touch
        tazzboy True the only thing bad that might happen is that doesn't work at worse. Then again it might work and Behringer would smart to make it happen or letting people know.
        • November 29, 2020
      • Motu 8pre usb into Behringer X-Touch
        DaveMorrison It works for me, but it doesn't work for every one. I think that's why Behringer won't say it will.
        • 1
        • ·
        • November 29, 2020
      • Motu 8pre usb into Behringer X-Touch
        tazzboy Well I gave it try and didn't work for me. Oh well on to something else, Now I need to figure out to get the X-touch and Motu 8pre to communicated with one another when using.
        • November 29, 2020
  • New
    Markdb
    Newcomer - Level 1
    2021-05-18

    I am based in Ireland and I have 5 berhinger synths. 

    My plug board is getting very stacked and messy 
    I got the europeon plug heads with my synths with a uk adapter 

    The one I have is this = https://www.thomann.de/ie/tc_electronic_powerplug_12.htm

    I need the uk head for these plugs Like its sold here https://www.gear4music.ie/Guitar-and-Bass/TC-Electronic-PowerPlug-12-Power-Supply/

    Can you buys these seperatly can anyone advise me on this. 

    read more...
    0 61
    • Markdb
      Dale_M Hi there yes, "sliders" are available, please contact our Spares department by going to the Support tab above and selecting Spares.
      • May 18
  • New
    SouthPTC
    Newcomer - Level 1
    2021-08-27

    I need to order 3 of these dongles. Can you help me with this?

     

    Carri Mefford

    PTC President 

    Fairfield South Elementary 

    0 24
    • SouthPTC
      WilliamR Hello, Please click on the support link above and create a parts case, someone will contact you ASAP.
      • Aug 27
    • SouthPTC
      SouthPTC

      I can’t complete the request on that site because I don’t know the model. I only know the exact part that I need.

      • Aug 27
    • SouthPTC
      SouthPTC

      • Aug 27
  • New
    brettech
    Newcomer - Level 1
    2020-11-29

    Can I use a single mode Tactical Fiber to connect 2x Midas M32 together using this Klark Teknik product?

    0 215
    • brettech
      Paul_Vannatto Hi Bretton, if you intend on using the fiber interface, you will need 2 DN9620 - one at each end.
      • November 29, 2020
    • brettech
      DavidKnighton Hello Bretton Boyd,
      The specification for the DN9620 is multimode fiber, so using a single mode fiber will likely yield problems or simply no connection at all. In theory though, the 9620 will transmit AES50 audio and clock to another console just fine if using the recommend fiber cable.
      • December 1, 2020
  • New
    h941224
    Newcomer - Level 1
    2021-01-14
    I wonder this cable's shield is S-FTP (Screened shielded twisted pair) or UTP shields ???
    0 67
  • New
    GaryCMarston
    Newcomer - Level 1
    2020-12-29

    Please help or provide a help number for klark technik.

    0 129
  • New
    Pastorwife
    Newcomer - Level 1
    2021-04-02

    Of like to be able to send out service to Facebook live using for cable and I have no clue how, I've looked at many YouTube videos but none show me step by step set up from where to plug it in the back output to getting all Musician's in. Thank You very much 

    read more...
    0 60
Go to page