• New
    JD23
    Newcomer - Level 1
    2021-01-24

    A couple of years ago, I bought a house that had a theater room in the basement.  The previous owner left the rear speakers installed in the wall.  I pulled one out and learned they are Tannoy iw60 efx boxes.  I found the manual online.  I'm a speaker noob.  I read the cinema mode is 4 ohms while a music mode is 8 ohms.  My receiver only goes down to 6 ohms.  So, I assume I need the speakers to be in music mode.  I have no clue how to do this.  I would appreciate any help.  Also, advice on whether these will be good rear surround speakers would be great.  Thanks!

    read more...
    0 131
    • JD23
      PedroRodrigues Hi JD23 when using the Tannoy iW60 EFX I would recommend having a Amplifier Power that offers the following power and impedance 100 - 200 W @ 8 Ohms and power handling of Average 100 W; Programme 200 W; Peak 400 W so you must look for power amplifier that offers these specifications to avoid any issues. Thank you
      • Jan 25
    • JD23
      JD23 Thank you for the reply. I am wondering how to make the speakers 4 ohms vs 8 ohms. Aside from the normal red and black pair of banana plugs, there is a green connector on the back with a place to insert 4 wires and set screws to tighten down on them. The holes are marked two with a plus and two with a minus. Does this have something to do with the resistence?
      • Jan 25
  • New
    KristofVandeWeghe
    Newcomer - Level 1
    2021-08-04

    Musictribe, 

    Is it currently possible to buy in-ceiling speakers from tannoy (pci in Europe? 
    Please more information about this. Or a target date when these speakers can be purchased.

    Many thanks

    read more...
    0 38
    • KristofVandeWeghe
      DavidKnighton Hello KritofVandeWeghe,
      Please use the https://tannoy.com/buy page to locate your regional Tannoy distributor. We unfortunately cannot provide logistical information as this is not privy knowledge to our team.
      • Aug 4
      • purchase in-ceiling speakers (europe)
        KristofVandeWeghe David,

        I spoke to the largest distributors in Europe. Both in the Netherlands and in Germany.

        Is it true that there are problems with delivery in Malaysia?

        I have been waiting for an answer for 6 months now. For a large brand like Tannoy, it is allowed to speak freely about the problem and when it will be solved.

        You can always contact me with a PM
        • Aug 5
      • purchase in-ceiling speakers (europe)
        KristofVandeWeghe David, have you already more information about the discussion below?
        • Sep 5
  • jalexander510
    Contributor - Level 1
    2020-05-08

        I recently purchsed used 800a monitors (with matching sub) and they had some of the best imaging ever heard, but they did not last long. The Right speaker was dead in the water, when I opened it up, the LM317/LM337 transisters looked fried, so I replaced them. In the process the board started to delaminate in around the holes. I just used jumber wires to what I thought were obvious places, but now I have sound but its only static. 

         I would like to replace the amp with original on the one monitor or use a similar active amp to replace both speakers. I assume I would just have to match the crossover network before it splits to the amps. I really want to use these monitors again because I just got them last month. Can some please guide me a bit?

    read more...
    0 77
  • New
    StuWilkinson
    Newcomer - Level 1
    2021-04-29

    My new 402 Reveal, only used it a few times, the power light did not come on, took the fuse out and replaced with a new one, put the kettle lead in and the light stayed on for a few seconds and now it doesnt power up again.

    0 69
    • StuWilkinson
      NicJonesMT Hi Stu.
      Sorry to hear about this. If you Click Support at the top of the page and submit a Service ticket, the service team will be able to advise you further.
      • Apr 29
  • New
    Hissound123
    Newcomer - Level 1
    2021-10-18

    Hi,

    I bought used pairof Tannoy Reveal 402. Everythink is okay, but i hear loud "hiss" sound.
    What can i do in this situation? Is this possible to eliminate noise sound?

    This sound appears when i just switch on monitors. I do not plug anything, just switch on.

    Best Regards

     
     
    read more...
    0 1
    • Hissound123
      Dale_M Hi there, it would be best to do the obvious things first like trying different cables or a different audio source/set-up to see if the problem stays with the speakers or stays at your equipment.
      • Mon at 11:28 PM
  • New
    siddsmarty5
    Newcomer - Level 1
    2021-08-05

    Do you have a distributor in India for your HiFi range of speakers?

    0 46
    • siddsmarty5
      Nigel67 Hi siddsmarty5. At the present time it appears that we do not have a distributor in India. For our closest partner please go to this link and enter the country closest to you. Many thanks
      https://www.tannoy.com/buy.html?type=STORE
      You could try Alphatec Audio Video (http://www.alphatec.co.in/) however I am unsure whether they sell HiFi speakers.
      ALPHATEC AUDIO VIDEO PVT LTD
      D/7, 33 , Bhumi World Industrial Park. Pimpalas, Bhiwandi, Thane.
      India
      Ph:- 7008250861 , 8851818143
      • Aug 5
    • siddsmarty5
      siddsmarty5

      Thanks Nigel. Does your china distributor sell the Tannoy range of HiFi speakers? If yes then could you kindly send me your China distributor details as am not able to open their website given on your site. Thanks

      • Aug 5
  • New
    Mgrenwic
    Newcomer - Level 1
    2020-11-12

    Hello, I am very interested in the Tannoy Xt8f's but would like to know if you are now providing the "bung" inserts for the bass ports? If not, do you have a recommendation? My room is 16x18x8 Ft and I am concerned there will be too much bass. Thanks 

    read more...
    0 117
    • Mgrenwic
      ChrisEdwards1 Hi Michael, the Revolution XT6F and XT8F do not come supplied with port bungs, however, if you require them any generic Third-party ones that can be purchased online or via your local HiFi dealer would be suitable. The diameter of the bass reflex port on the XT8F is 7.5cm and for the XT6F it is 5.5cm.
      • November 11, 2020
    • Mgrenwic
      TonyC1954 Good day, I have a pair of eclipse 3 speakers, but have managed to break the plinth , plastic foot on one or them, can I purchase a replacement foot?
      • November 26, 2020
  • riches
    Newcomer - Level 1
    2020-09-28

    Hi, Just retrieved my old and muched loved R3's from storage and a moues had climed in one on them and gnawed the wires and 2 speakers. I need the tweeter and middle driver. All I can see on the units is N39Y and U39X. Can anyone help me replace these parts. And if I'm replacing them on 1 speaker should I do the came on the one that works too?

    Many thanks,

    Peter

    read more...
    0 76
    • riches
      john0121 Try the spare parts request form via the support button at the top of the page. The team will be able to let you know the pricing and availability.
      • September 28, 2020
    • riches
      riches Thx John
      • September 28, 2020
  • New
    hitmeister
    Newcomer - Level 1
    2021-06-18

    I have an old pair of Tannoy PBM 6.5 II studio monitors. I need to know the recommended distance from the wall to place these monitors. I don't have a user manual, and I can't find one online. I'd appreciate any help.

    0 64
    • hitmeister
      ChrisEdwards1 Hi hitmeister, Wherever possible you should place each speaker at least 0.5M from the back wall and 1M from the nearest sidewall. The distance between each speaker should be between 2 – 4 meters depending on the listening distance and room size, the distance between the listening position and loudspeaker should be slightly greater than the distance between the speakers.
      • Jun 19
    • hitmeister
      hitmeister

      Thank you, Chris.

      • Jun 21
  • New
    michal2512
    Newcomer - Level 1
    2021-03-30

    Hi. I've got Tannoy Mercury 2.5 speakers. There are broken hightone speakers (photo). Is it any chance to get this parts?

     

    Thanks and advice.

    Michal

     

    PS. Mayby some technical data someone knows?

    read more...
    0 78
    • michal2512
      ChrisEdwards1 Hi michal2512, if you have not yet done so I would recommend submitting a spares ticket. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Spares tab and submit a ticket. Many thanks
      • Mar 30
Go to page