I have an M32C with a DL32 with a split snake always connected in the rack.  I had my vocalist over to play back the last gig to enhance his sounds of his IEM's because he just bought new molds.  We all run in stereo and It's weird, I all of a sudden can't get Bus 3 to respond to fader moves. I moved him to Bus 11 and it works fine.  Fader moves appear on screen but audibly makes no difference in Bus 3.  Can someone please review my attached scene to see what is possibly wrong?

We use this setup for FOH with our IEMS and also when a venue has their own PA system we use this rack with our split snake just for IEMS only.  Should I have a different scene for each use case?  Meaning a differnt pre/post settings?

If anyone sees anything else I should be doing on this scene to improve our experience it would be greatly appreciated.

Thanks,

Danny K 

Hello,

I noticed that a snippet won't consider "main stereo" affectation on channels, even with all parameters in the snippets menu selected.

That'would be great help to be able to have this feature activated.

(FW4.04)

Guillaume

HERITAGE-D Series
bit.ly/Midas-HERITAGE-D-Series

Live Digital Console Centres, Stage Boxes with Multiple Microphone Preamplifiers and Accessories
The Midas HERITAGE-D Series Digital Mixers and I/O Interfaces are designed to serve our Tour Sound and Installed Sound Customers.

From: $37,500

#Midas #HD9624CCIP #HD9624CCTP #HERITAGEDSeries #Mixers #Digital

I am looking for a way to interface with Thunderbolt 3 from UAD Luna recording software running on Mac Mini and stack of UAD hardware (2 Apollo x8p and 1 MKII) from Midas M32R. The objective is doing live recording using Luna and using UAD plug-ins for live performance. 

Would greatly appreciate any pointers for this set-up. Due to the distance of the set-up of two stations (M32R and UAD equipment are not co-located), the long ADAT run is not feasible (more than 15'). 

Thanks!

DP48 POE power supplies and injectors summary 012621

Original MT forum post link

https://community.musictribe.com/discussions/62367/307197/dp48-poe-supplies-and-injectors-update

I tried to simplify everything below (I hope) from the original posts from May/Aug 2020. I also now own a Hub4 (they exist in the USA finally!) but these will still function as intended and can be used with DP48's. A less expensive way to remotely power the DP48's perhaps. The Hub of course has many other features. It was also next to impossible to find my old post which is the biggest reason I'm reposting this here today.

Update Jan 2021 

Device 1

 https://www.amazon.com/gp/product/B01IZAQJG0/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

For use with inexpensive power/data splitters like:

Device 2

https://www.amazon.com/Passive-Injector-Splitter-Connector-Ethernet/dp/B07F82YK6P

These will work with a DP48 by using the powered device (1) for the power source for the injector. These are VERY handy because they are compact and they plug into any outlet directly. Connect the power out section to the injector device (2) then connect your aes50 data cable to the injector, POE out port from the injector can now power the dp48, data cable from elsewhere (like a mixer aes50 port or second DP48 thru port) provides the data. Adding more DP48's up to Ia fairly high number (guessing 7+ like the P16's but I am not 100% sure of just how many exactly) You would need one of each for each DP48 line.

Link for for some background info on power ranges (and much more).

https://pinoutguide.com/Net/poe_pinout.shtml

Device 3 

https://www.amazon.com/Cudy-POE300-Injector-1000Mbps-Compliant/dp/B07VMCN87B

Works perfectly fine for both power and data, best perhaps for a single or a few DP48's

 Device 4 

https://www.amazon.com/gp/product/B01CAKJRTW/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

Worth considering IMO for the power supply part ONLY. The price is fair enough just to use for power injector and store the other pieces for another day. The other parts DO NOT work for DP48’s. I originally was going to return it but kept it just for the power supply itself.

 ***It appears POE SWITCHES do not work AT ALL for passing AES50 data***            (thanks to Rex Beckett for confirming this)

Passive Injectors:

Device 4

https://www.amazon.com/Ethernet-Injector-Combines-PoE-Connector/dp/B00EBCGJVW/ref=dp_prsubs_1?pd_rd_i=B00EBCGJVW&psc=1

It's a small passive device and works perfectly with the correct power supply, (wide ranges supported!) it comes without any power supply but works with the ones mentioned above or similar. These will also work with a 12V power supply and P16M’s

There are several other injector choices out there (and splitters) that supply power using 10/100 (no data on pins 4,5, 7 or 8) which will work for Ultranet (P16) devices ok but NOT DP48's. Important note for P16M: ONLY use a 12V dc power supply for P16 use!!! P16 is in one directional only. The ultranet appears to apply to only pins 1,2,3 and 6 OR it at least does NOT use pin 4,5,7 and 8 for P16 data.

Best POWER adaptor imo:

Device 5

https://www.amazon.com/gp/product/B015NI5UG2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

My injector of choice, 8 port:

Device 6

https://www.amazon.com/gp/product/B077PDRLLL/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

Summary. You need a power supply that gives at least 48v dc. The Midas Hub sends 52V. I suspect 48-60v is fine. 48v worked for me as did 60,54 and 51v. The injector needs to be Mode B (positive power to pins 4 and 5, negative to pins 7 and 8) and passive. Use the 802.3at spec (capable of providing higher power). For AES50 the injector needs to have all pairs "in" connected to all pairs "out" such that both data AND power are shared on pins 4,5,7 and 8. *AES50 and DP48's need all 4 twisted pairs connected in and out to work properly in both directions.

Thanks also to Josh Gibson (? Indiana) for the following 2 additional choices! Josh had a great post on how he wired these up in his system which I can't locate but I did copy a summary way back when: 

DP48 Poe  (Josh Gibson)

"So what you need to do is put a POE injector before each DP48. We did this by installing a 12 Port POE injector in our system rack behind the stage. Then I ran (2) Cat5E shielded cables to each floor pocket under the stage. So I run from Wing FOH to the POE injector Data port 1, then from POE port 1 out to the DP48 via floor pocket. Then back from the DP48 to POE injector Data port 2, and then just follow that pattern. This allows me to power up (4) DP48's and have just (2) Cat5E cables to each unit. No power supplies at unit, and no output cables. I get my output back from the DP48 to the Wing then route it so the D32 stagebox output, then route that output to my Wireless IEM transmitters for a stereo IEM feed. Its been working great. Total cable length is over 700ft. Longest single length is 205ft from FOH to rack. Then about 65-75 ft to each floor pocket."

Device 7

https://www.amazon.com/gp/product/B07PR9CBGL/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Device 8

https://www.amazon.com/WS-GPOE-12-48v60w-gigabit-passive-Ethernet-Injector/dp/B00EQBR7M8/ref=pd_ybh_a_104?_encoding=UTF8&psc=1&refRID=2Y8RPP96FR8WJRH5R6SM

This info is correct to the best of my knowledge, although anyone who chooses to use any of it should do so completely at their own risk. Correctly described and explained or not, the above devices worked or did not work for me as stated.