Hello,
I've posted previously about having an issue with seeing the channel names broadcasted to the DP48 while using an SD8 with the Behringer X32 Compact. The community has helped with understanding the AES50 A & B streams. However, I still need help from the community to answer this question.
Should the DP48 see the broadcasted channel names when connected to an SD series digital snake or should I be using the S or DL series digital snakes?
What I've experienced is that the DP48 does not see the broadcasted channel name but does get the same channel setup and audio from the AES50 A side the snake box is setup on. When the DP48 is directly connected to a separate AES50 port on the mixer and NOT through the SD snake box, all the channel names are received including real-time name changes. I've experienced this on the X32 Compact and WING mixers using the SD8 and SD16 stage boxes.
Tribal help is greatly appreciated.
Hope you guys are well. I am having the weirdest issue with 1 of our DP48s. We are connecting them via HUB4. For the most part, the system is work well. We have 1-DP48 that is making a wierd digital noise. It's only comes from 1 routed channel & that channel is not making that noise on the other 3 DP48 units. Very strange. Anyone else experience any weirdness like this?
Good Morning,
how can I adjust the recording level from DP48?
thanks
Fabio
Does anyone know if the DP48 Monitoring System can be used with the Midas MR16 Mixer? Or if there is a solution how this can be configured?
I have a DP48 for my IEM and the other guys in the band are using P16's. I also have the S16 in aes50-a. So for that reason my DP48 is connected to aes50-b.
if I record a sound check the guys using the P16's can then adjust their personal mix without having to do any re-routing at the X32(rack). However, it seems that this can not be done for the DP48. As far as I am aware I would have to re-route to playback the soundcheck so I can adjust my IEM mix???? or am I mistaken, is there a way I can play back without having to re-route (and then having to re-route again to be able to use IEM for the actual live performance?
please email me as I will probably never find this discussion again. (The most confusing forum ever designed).
thanks.
We just upgraded from the P16s and love the sound quality. The one thing that we are really looking for in a firmware update would be independent Mix A & B control of the relative levels and panning within each group. We run like instruments on each group, so it would be ideal for each band member to control their group submixes independently.
I have a question: Will it be possible to connect any devices other than DP48 and DL8 to the AES50 ports? E.g. DL153, SD8 ..... :)
I'm completely new to the DP48 and having an issue that I can't figure out.
To add names to the groups, I've created a single line .csv file, comman delimited, and imported the names. For some reason the name for group 1 is blank. I've tried creating the file in Excel and Notepad with the same results using each.
For example, this is the file I created:
Keys,Mic 1,Mic 2,Mic 3,Bass,Drums,HH 1,HH 2,Gtr 1,Gtr 2,Click,Pads
When I import this, I see this on the screen:
HH 1
Mic 1 HH 2
Mic 2 Gtr 1
Mic 3 Gtr 2
Bass Click
Drums Pads
I can't figure out why "Keys" is blank.