Statistics

208,800 members
81,040 posts
  • graesserph
    Newcomer - Level 1
    2020-08-22

    Hi. I'm using SynthTool 2.40 and two TD-3, both on firmware 1.2.6.

    When I use the "dump" feature in SynthTool, then it properly exports 64 patterns (counts up to 64).

    When I use the "merge" feature afterwards to import the previously exported dump file to the second TD-3, then the "merge" counts up to 49, and then says that it was successful.

    So basically, what it imports via "merge" is all correct, but it's only 49 patterns, means 16 patterns of pattern bank 1, 2, and 3, and only the very first pattern of pattern bank 4.

    This is very easy to reproduce. Simply create a pattern in Pattern bank 4, pattern 8 for example, then dump the whole machine, and merge it to another one.

    I also tried with SynthTool 1.36 ... same results.

    read more...
    0 35
    • graesserph
      Nigel67 Hi Andreas. I have just heard from the designers. this bug was fixed and is incorporated into the new synthtool app that was released about 21 hours ago. Many thanks
      • August 25, 2020
      • SynthTool with TD-3: "Merge" always only imports 49 patterns (instead of 64)
        graesserph Awesome! Tried it with SynthTool 2.4.1, and works like a charm. Thank you so much.
        Also great to see that you've incorporated the RD-6 in the SynthTool. So there's still hope for the RD-8 to get its place as well .
        In any way, I'm seriously impressed. It's great to see a community where you get "real" answers by people who obviously care. Thank you!
        • 1
        • ·
        • August 26, 2020
  • jhupka
    Newcomer - Level 1
    2020-08-19

    I'm very new to synths, and the Odyssey is my first purchase and I have lots to learn.  I tried searching and didn't find anything related to my question.

    The Pulse Width sections for the two VCOs on my Odyssey don't seem to do anything for sound shaping.  No matter how much Width or MOD I give them nothing happens.  The LFO/ADSR switch under the MOD fader doesn't seem to have an effect, either.  I tried messing with these in conjunction with other settings (like the LFO frequency) and still no dice.

    My main thing now is just trying to figure out if there's a problem with my synth or not since neither Pulse Width section seems to work.

     

    Thanks for the help! :-)

    read more...
    0 15
    • jhupka
      DavidKnighton Hi jhupka,
      The pulse width only affects the square wave oscillator. Make sure the square wave VCO is pushed up in the audio mixer so that you can hear the affects of the PWM.
      • August 19, 2020
      • Odyssey VCO Pulse Width
        jhupka Thank you for the help, David. This answered my question, and the Pulse Width sliders are working. :-)
        • August 20, 2020
  • craigspeed
    Newcomer - Level 1
    2020-08-31

    Hiya,

    I recently picked up one of the expert sleepers floating ring cables and wanted to try out the CV in through the pedal jack.

    I tried sending CV from a clep diaz module with attentuation through Maths. It's plus minus 5 volts so should be safe. I set the foot pedal to expression and in mod matrix set expression to Osc 1 + 2 pitch at full range.
    I'm not hearing impact. I tried some other CV sources like 1v/octave from a shuttle control and simple LFO. Not able to get any change. I also tried setting foot pedal to footswitch and applying that in mod matrix.

    Do I need to "Calibrate" the footpedal input for CV? If i try to calibrate the numbers range is much much lower than would be for an expression pedal but it never finishes calibration and applies a new range. Is there more information on how to do this properly online anywhere?

    read more...
    0 10
    • craigspeed
      craigspeed Can anyone at Behringer help with this? I can't imagine I'm the only one whose tried to do this. I do think it's a great synth otherwise and I'd rather not return it..
      • September 3, 2020
  • KipChatterson
    Contributor - Level 2
    2020-06-20
    I recently purchased a CAT. I am used to finding a midi compatibility chart with any synth. What messages does the CAT respond to? I know it receives notes from a midi keyboard, what else? Where can I find this information? Thanks.
    0 22
    • KipChatterson
      JoeRivers96 Hi Kip - the CAT responds to MIDI note information only. All other communication is done via Sysex, which is also captured via the SynthTool. The latest version of this can be found on the link below:

      https://www.behringer.com/product.html;jsessionid=DFF9F5710C9963951B4ADDDEAE2E1172?modelCode=P0DNE
      • June 24, 2020
      • What midi does the Cat respond to?
        KipChatterson So is there a midi implementation chart somewhere? You said above, note only. Can we send it pitch bend? What other controls are available via sysex? I have a bcr2000 that can send sysex, would like to use it with the cat. Thanks.
        • June 24, 2020
  • JeffPorrello
    Contributor - Level 2
    2020-06-20
    I have a brand new Odyssey Synth. I'm not new to synthesizers. All notes get stuck on. I cannot find a way to rectify this. I would like to find a solution before exchanging it for a new one. Any ideas? I found an old post during a web search with someone having the same issue along with a solution. Of course when you click on the link it takes you to an old Behringer support page and says "Page Not Found"! Gee, Thanks!! Also, what's up with only QSGs (Quick Start Guides). Why aren't they're any advanced User Guides??? (Same with the MS-1 Synth!!). C'mon Behringer, help us out here!!
    read more...
    0 49
    • JeffPorrello
      JoeRivers96 Hi Jeff - thanks for reaching out! When you say the notes are stuck on, does the pitch change is you trigger different notes, yet the sound is constant? Does it seem that your ADSR envelope is ineffective? If so, it may me your VCA GAIN fader. I'd recommend setting this fairly low, as having this up increases the gain on your unit and causes a 'hold' like behaviour. Let me know if this is not the cause.
      • June 22, 2020
    • JeffPorrello
      JeffPorrello Hi Joe, thanks for trying to help. Yes, pitch changes when a new note is pressed. The ONLY sliders open are VCO 1 (1/2 way), VCF Freq (1/2 way), and VCA Gain (1/2 way). All notes stick regardless of where you position these basic sliders. The synth (as set above) is in its most basic form whatsoever for making any kind of sound, so this should NOT be happening. I don't know enough about MIDI to send an all notes off message or Sysex messages, but do know something’s up here.
      • June 22, 2020
    • JeffPorrello
      JeffPorrello Hi Joe, I can send a video if you like.
      • June 22, 2020
    • JeffPorrello
      JoeRivers96 Hi Jeff, thanks for this. If possible please record a short video displaying the issue and submit a support case using the SUPPORT option so that we can look into this further for you.
      • June 23, 2020
    • JeffPorrello
      JeffPorrello Hi Joe! Pilot Error!! I did not realize there were two VCA sliders. I was using the one named "VCA GAIN" which was keeping any notes played continuing to play. The one immediately below it was the one I should have been using ( VOLTAGE CONTROLLED AMPLIFIER) all along, so my fault!!!
      • June 26, 2020
  • TheMoroney
    Newcomer - Level 1
    2020-07-04
    Hay, I have seen mention on the web that there is an android app for the deep mind 12, just can't find it yet. I'm on the brink of buying an iPad Pro just to use with the deep mind 12 but prefer android. does anyone know if or where I can find the android app?
    read more...
    0 30
  • New
    Behringer
    Triber Moderator
    2021-01-12

    OSCILLATOR MODULE 1004
    bit.ly/BE-OSCILLATOR-MODULE-1004

    Features discrete transistor circuitry to add vintage character and is equipped with coarse and fine frequency controls, frequency range switch, on/off switch, pulse width control, 3 modulation attenuators and best of all it features 3-position toggle switches for each waveform which can be set to inverted/off/non-inverted, all the enabled waveforms are mixed together to create complex waveform shapes and amazing sounds.

    List Price: $99

    #Behringer #OSCILLATORMODULE1004 #2500Series #Keys #Synthesizers #Keyboard

    read more...
    0 20
  • TheMoroney
    Newcomer - Level 1
    2020-07-04
    Is it possible to export the patches on my Deepmind 12 to my PC for safe keeping? That and how can put patches i have bought online onto my deepmind 12?
    0 29
  • New
    Lopiano
    Newcomer - Level 1
    2020-12-12

    Not having sustain pedal suport or even cc64 support is really getting in the way of me doing what I want to with this product.  Idealy I'd like a proceedure like that for velocity where you you hold down a combination of button at start up to turn of the two pedal ports into a sustain pedal port.  I understand that this might not be possible if those ports perform their functions purely in hardware.  If that is the case I'll accept having sustain operate only via cc64.  The cc64 fix should be possible and easy as midi notes have to be processed by a microcontroller so it should just be a matter of adding hold table for sustained notes and a bool variable to store the status of the pedal.

    read more...
    0 13
    • Lopiano
      john0121 Hi John, I'll report this to the development team for you so they can consider it fir the future.
      • December 14, 2020
    • Lopiano
      Lopiano Thank you so much this has been driving me crazy!
      • December 14, 2020
  • New
    BillBorez
    Contributor - Level 2
    2020-12-12

    How do I change the midi channel on the Neutron whilst it's mounted in a eurorack case i.e. not in the original case?

     

     

    1 10
    • BillBorez
      BillBorez So, after and afternoon of messing around trying to change the channel with MIDI-OX and sysex messages ( non of which worked ) I resorted to pulling the Neutron out of my Eurorack setup, installing it back in its original case, connecting it all up, firing up the app, changing the midi channel and then re-installing it back in my eurorack case. Utter pain to do. I can't believe you can not actually change the midi channel on either the Neutron the frontpanel in Eurorack configuration. Bonkers.
      • December 12, 2020
    • BillBorez
      ThorstenBösing Why don´t use the Synthtribe App for this? there you can change it in seconds. :)
      • December 13, 2020
Go to page