Statistics

250,906 members
128,125 posts
  • New
    Abcd4
    Newcomer - Level 1
    2021-08-24

    I'm going to buy the Behringer 960 sequencer. I have plenty of analogue synths with cv inputs. What else do I need to get the sequencer up and running to trigger the sounds of my synths in a sequence.

    0 26
    • Abcd4
      PedroRodrigues Hi Abcd4 Please consider that the Behringer 960 the oscillator is a built-in clock that makes the sequencer operate.
      When you vary its frequency, you will not be changing the pitch of a sound but rather the speed at which the sequencer runs.
      To play, you push the Oscillator On button. To stop, you push the Oscillator Off button.
      When it comes to the CV outputs on this unit they’re not labelled as A, B and C, in pairs at the end of each row, the gate output is labelled Oscillator Output.
      Please take in to account that the 960 offers three rows of eight variable controllers with a flashing LED above each step.
      The user can set up these rows in parallel to generate three-note chords or it could play three different monophonic patterns simultaneously.
      To play 16- or 24-note patterns, you must have the 962 Sequential Switch module, as it switches from one row to the next as each comes to an end.
      • Aug 25
  • New
    Smellewell
    Newcomer - Level 1
    2021-07-25

    Hey, just starting out on the euro rack modular road.  Just wondering if all the different moduals can be patched to each other.  ie, can a system 100 LFO be patched to a System 50 VCA etc?

     

    0 42
    • Smellewell
      Smellewell

      • Jul 25
    • Smellewell
      Smellewell

      See that’s the problem with these automated systems. I haven’t bought the products yet and it’s asking for a serial number. A simple enough question to the right person.

      • Jul 25
    • Smellewell
      DavidKnighton Hello Smellewell,
      The idea of modular Eurorack is that nearly all modules, makes, and manufactures are cross compatible in the same realm of operation. Most Euro style modules will be compatible to a large degree. So long as you have a proper understanding of CV and signal flow, you should be free to patch whatever modules you feel. As for the tech support inquiry, if you don't have the product serial, either put in a random number, or change the ticket type to PRE SALES.
      • Jul 26
    • Smellewell
      Smellewell

      Ok thanks for that

      • Aug 4
  • New
    MODULARMANF
    Newcomer - Level 1
    2021-07-12

    hi team - i have a Eurorack store and want to stock the BEHRINGER EURORACK MODULES - who can i talk to ?

    0 35
    • MODULARMANF
      DavidKnighton Hello MODULARMANF,
      Please submit a Pre Sales inquiry via the SUPPORT tab at the top of the page. This will get you on the right track.
      • Jul 12
  • New
    neuropamail
    Newcomer - Level 2
    2021-06-27

    https://youtu.be/6hBQG4v6xFY

    This is a Behringer System 100M synth jam of original track I wrote only using the 100M system titled "DRIVE" under my solo project name "Moroderhead".

    I was really excited when I eventually took the leap into Eurorack and put together this Behringer System 100M monster synth. I got hold of a Waldorf KB37 for my 100M modules including: 2 x VCO 112 dual osc, 1 x filter module 121, 1 x VCA module 130, 1 x Env module 140, 1 x Ring Mod / noise 150. 

    Drums are the RD9 and 606 clones. I've replaced to many of my original synths with Behringer gear that my studio now looks like a product endorsement museum lol. Can't wait for the UB-X and PPG clones when they come out as well as the Lindrum and DMX clones. 

    If you like the track featured in this video, you can download it here:
    https://moroderhead.bandcamp.com/album/drive-ep

    You can also reach me on Facebook here:
    https://www.facebook.com/moroderhead

     

     

    read more...
    0 59
  • New
    Behringer
    Triber Moderator
    2021-06-29

    CM1A
    bit.ly/Behringer-CM1A

    Learn More:https://www.youtube.com/watch?v=-A2GJOWOu0U

    A high-performance MIDI to CV Converter that allows you to control any modular synth in your setup with a MIDI keyboard, sequencer or DAW to open up an infinite number of ways to make some amazing tunes and a whole realm of sonic possibilities.

    List Price: $99 (in stock and immediately shipping from our factory)

    #Behringer #CM1A #SynthesizersAndKeyboards #Eurorack #Synthesizers

    read more...
    0 71
  • New
    jamesbohn
    Newcomer - Level 1
    2021-07-31

    The quick start guide for the 921B says that you have to adjust the "scale" and "freq adj" trimmers on the back to the module in order to calibrate the tuning.  Maybe my eyes are bad, but I cannot find anything on the back labeled "scale" or "freq adj." Can anyone provide a photo of the two trimmers I'm supposed to adjust?  

    Thanks:  Jim

    read more...
    0 31
    • jamesbohn
      Nigel67 Hi jamesbohn. There is text just by the presets on the board. Please see picture attached.
      • Aug 2
    • jamesbohn
      jamesbohn Thanks so much!
      • Aug 3
  • New
    Behringer
    Triber Moderator
    2021-07-15
     
    An analog VCO module and an authentic reproduction of the original ARP 2600 circuitry that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the 2600-VCO in with your existing rig or start your modular synth journey from here.
     
    List Price: $99 (in stock and immediately shipping from our factory)
     
    #Behringer #2600VCO #SynthesizersAndKeyboards #Eurorack #Synthesizers
    read more...
    0 121
  • New
    Behringer
    Triber Moderator
    2021-06-30

    SYSTEM-15/35/55 Series
    bit.ly/Behringer-SYSTEM-15-35-55-Series

    Learn More: https://www.youtube.com/watch?v=okQA_qLErIE 

    Complete Modular Synthesizers with MIDI-to-CV Converters and EURORACK GO cases The Behringer SYSTEM-15/35/55 Series Eurorack Synthesizers are designed to serve our Musician, DJ & Production Customers.

    From: $1,599 (in stock and immediately shipping from our factory)

    #Behringer #SYSTEM15 #SYSTEM35 #SYSTEM55 #SYSTEM153555Series #SynthesizersAndKeyboards #Eurorack #Synthesizer

    read more...
    0 53
  • New
    Alexander420
    Newcomer - Level 1
    2021-08-18

    Hi guys! Hope you can help me with this problem. My Pro-1 purchased on Musicstore arrived today and i noticed that the sequencer and arp do not work completely !! Even when I select the sequence 1 or 2 the sound disappears. I just don't understand what it can be and I don't know if it's a Pro-1 defect. I've tried various methods but none of them work.. I tried to connect it with ableton in external instrument, both in USB and with a audio interface with the midi connector, I tried to deactivate the polychain (the power led turns red and when I press a note it turns green skipping some notes played), I thought ableton was the problem and I connected the Pro-1 (midi in) to my td-3 (midi out) but still nothing. You try them all but I still can't solve it ..
    I can post photos and videos if it can help me. I hope you can help me.

    read more...
    0 28
    • Alexander420
      PedroRodrigues Hi Alexander420, please consider that this information was provided on the case that you have submitter directly with the Tech support Team. Please use the case submitted to exclusively exchange information on this matter. Thank you
      • Aug 19
  • New
    Behringer
    Triber Moderator
    2021-06-15

    BRAINS
    bit.ly/Behringer-BRAINS

    Learn More: https://www.youtube.com/watch?v=U59OzyB6lBM

    Amazingly versatile macro sound source for creating lead, bass and percussion sounds, as well as drones and soundscapes. With 20 digital oscillators, you can create a wealth of wild and out-of-this-world patches using chords, harmonic oscillation, particle noise, analog bass drum, snare, hi hat, super saw and even speech sounds. Dive into the world of sound magic.

    List Price: $149

    #Behringer #BRAINS #Synthesizers #Synths #Keyboards #OscillatorModules #Eurorack

    read more...
    2 111
Go to page