Statistics

235,549 members
111,319 posts
  • New
    TCH-Rob
    Triber Contributor
    2021-04-15

    Hi friends! We are very excited to anounce GoXLR update 1.3.130.

     

     Features:

    Color Wheel

    • Allows for unlimited choices to fully customize the look of your GoXLR.
    • Recently selected colors are saved to make setting up your color profile faster and easier.

    Cough Mute

    • Cough Mute now has its own dedicated mute options.
    • Mute behavior can be set to Hold or Toggle modes.
    • Mic no longer needs to be assigned to a dedicated fader, thus freeing up a fader to mix another audio source.

    Line Out fader

    • The line out level can now be controlled by the application and can be assigned to a physical fader.

    System Tray / Minimized on Startup

    • GoXLR app can now be set to be hidden in Windows System Tray on startup.

    Quality of Life Improvements and Bug Fixes

    • Double click an individual band on the EQ to reset gain to 0dB.
    • Reset button now also resets EQ bands to a gain of 0dB.
    • Right-click on device component in app to enter the lighting tab for that component. A left-click will bring you to the settings tab for that component.
      Mic, Chat and Music are now select-able on all channels for Mini.
    • Global settings now contains a checkbox to select whether muting Voice Chat also mutes your Mic channel.
    • Headphone and Lineout should now properly display audio passing when set to meter mode.
    • Profile mute mode and EQ settings now load correctly on start-up.
    • With Line Out or Headphones as the channel source, Mute to All is the only select-able option.
    • Adjusting the mid and high EQ bands on Mini in basic and advanced modes did not have reliable behaviour. This has been corrected but this may have changed your profile EQ settings slightly.
    • Better error checking on updates.
    read more...
    1 71
  • FelipeDeJesusCepeda
    Newcomer - Level 1
    2020-10-12

    Hola, tengo el VLX3 pero no se como actualizar su firmware, su version es: 2.2.00 BUILD 366, agradeceria mucho que me puedan ayudar... Gracias

    0 87
  • JeremyGorman
    Contributor - Level 1
    2020-10-13

    Does anyone know if loops in the VL3 can be triggered via MIDI? I'm trying to get around the limit of 8 Loop Triggers (A - H) in the VL3.

    Thanks!

    Jeremy

    0 43
    • JeremyGorman
      PedroRodrigues Hi Jeremy it is possible to have MIDI sync on VOICELIVE 3 so you can can sync a external device such a pedal to use as a trigger, but for that you will need to have your VOICELIVE 3 unit running firmware version 1.2 . For more information please follow the link below to access a video about the MIDI Sync https://www.youtube.com/watch?v=n-c2hk4o9iA
      • October 13, 2020
    • JeremyGorman
      JeremyGorman Thanks Pedro and thanks for responding! Yes, I'm familiar with the MIDI sync feature, but I was really trying to see if the VL# might respond to MIDI commands to trigger loops. Since the VL3 has 50 loop slots (with 3 loops in each), but only 8 loop triggers (A - H) I am unable to trigger more than 8 separate pre-recorded loops. I was hoping to find a way around that.
      • October 13, 2020
      • Loop triggering in VL3
        PetGerbil no, the loops can't be triggered from midi...But, I've just had a squizz at the manual, and it looks like the 8 loops is per-preset, so could you change preset and get access to another 8 loops ? (I wonder if changing to a different "Step" would do the same thing ?...)
        • October 13, 2020
      • Loop triggering in VL3
        JeremyGorman No, it appears that assignment is one-time only. EX: you assign Loop 1:A to Trigger A in Program 100 and then assign Loop 2:A to Trigger A in Program 101. When you go back to Program 100 you now have Loop 2:A instead of Loop 1:A
        • October 17, 2020
    • JeremyGorman
      JeremyGorman Ok, I think I figured out a "work around" If I set one of the Loop Triggers to "Load Current Slot" (instead of specific slot) then whatever Loop Slot is loaded on the Loop page will appear. Ex: 'Trigger G - Load Current Slot - A' Now I create a Loop for Program 100 in Loop Slot 5:A and buttonmap Trigger G to the 'Hit" button. For Program 101 I create a Loop in slot 6:A and again buttonmap to the 'Hit' button. As long as I make sure to load Loop Slot 5 for Program 100 and Loop Slot 6 for Program 101 it works! Not ideal by any stretch, but a workable alternative.
      • October 17, 2020
    • JeremyGorman
      PetGerbil Does it make a difference if you re-save the loop and/or Preset after assigning 'em ?
      • October 17, 2020
      • Loop triggering in VL3
        JeremyGorman Doesn't seem to make a difference.
        • October 18, 2020
  • New
    HitPit01
    Newcomer - Level 1
    2020-11-14

    Hello, could someone please provide me an German Bedienungsanleitung pdf for my VoiceLive. I couldn't find it on official sites! There is only availability from VoiceLive 2 on? Thank you in advance. Best regards Peter

    0 43
    • HitPit01
      ChrisEdwards1 Hi Peter, unfortunately, there is not a German translated manual available for the VoiceLive, however, I have included a copy of the manual for you in the following link in the hopes this may be of some help. https://we.tl/t-diNOrDCRWd
      • November 17, 2020
  • New
    Dragonfly1
    Newcomer - Level 1
    2020-11-29

    I've been using my acoustic with my VL3 into a PA.  I decided to try using my strat with the VL3 into my Fender DR, but the unit creates a loud, high-frequency hiss even with the amps and cabinet simulations turned off.  It doesn't matter what else I adjust, it creates a constant hiss.  It's not as loud with my solid state amp, but still very noticeable.

    Anybody experience such noise issues?

    read more...
    1 39
    • Dragonfly1
      PedroRodrigues Hi Nick, please be aware that the VL3 was designed to be connected directly to a Mixing desk or to a PA as you mentioned. When you use the output connecting Guitar TRUH the output signal does not transport any of the effects via 1/4“ TRS phone jack.
      • November 30, 2020
  • New
    Sircates22
    Newcomer - Level 1
    2021-04-01

    Mostly just a curiosity but can anyone tell me if the audio that comes into the aux input remains analog on its way to the headphone output?

    if it doesn't hit a adc and dac in its travels, is the same true for the guitar input if your not using the built in digital effects? 

    read more...
    0 25
    • Sircates22
      PedroRodrigues Hi Sircates22 please consider that regarding to the Aux input, when a signal is detected here and no guitar is plugged in, Play Electric will use the music signal to figure out key and scale information, in the case of having a Guitar the unit will use this signal instead to figure out key and scale information. This means that I any case digital processing is always involved on this unit operations when it comes the input stage.
      • Apr 3
  • EricRyan
    Contributor - Level 2
    2020-10-13

    Direct link to VL3X latest firmware update (366?) please - I have no internet on my computer and must transfer the file from my phone to computer, then transfer it to new mini hd drive, then put drive into VL3X. Brand new unit sat in box, dry, cool environment unused for years due to long drawn out family tragedy. Now getting blue screen of doom. Starting from scratch with new HD drive

    read more...
    0 27
    • EricRyan
      leah Hello @EricRyan ,

      We'd love to help! Please submit a Care Ticket by clicking the Support link at the top of this page. Scroll to the bottom of the page and click Technical Support to get started.

      Thanks!
      • October 13, 2020
  • New
    KerryKnuth
    Newcomer - Level 1
    2021-01-13

    Is there any chance that the voice live play product could be upgraded to be able to store loops? That would be a great feature!!

    0 43
  • New
    JeremyGorman
    Contributor - Level 1
    2021-03-16
    Ok...here's a question for you.
    I want to have the metronome sound on any preset that I have a loop assigned to. That's the easy part.
     
    The hard part (so far) is getting the metronome to shut off when I switch to a preset that doesn't have a loop assigned to it. It stays on the previous presets loop, hence the metronome is still going.
     
    I can get around this by creating an empty loop with the metronome off and assign it to that preset, but this seems a bit silly and wasteful of a whole loop slot.
     
    I've been all through the manual, but so far no luck. What am I missing?
     
    Thanks as always!
    Jeremy
    read more...
    0 46
    • JeremyGorman
      PedroRodrigues Hi JeremyGorman I presume you are referring to the VoiceLive 3 Extreme right, if you are please Keep in mind that tempo/metronome settings are saved with each Loop. Accordingly, triggering a Loop using a remapped footswitch will invoke these settings therefore the metronome will still be active. What I might suggest is based on your suggestion of having an empty loop you can try to see if works by If you set the Met Follows Playback parameter to ON, the Metronome will mute and unmute automatically whenever the Loop is playing, this will prevent the metronome from continuing after you press STOP and might not work on a empty loop. On another point I would also advise you to check the metronome sub-menu on page 138 of the manual that may offer a few more options that may help you achieve your creative intents. To access the product page where we have the manual available please follow the link below https://www.tc-helicon.com/tchelicon/product?modelCode=P0DEG Thank you
      • Mar 16
      • Metronome question
        JeremyGorman Hi Pedro....first, thanks for responding! So no, I have the VoiceLive 3, not the Extreme and the issue is I need the metronome on for the entire time I am playing the song. That way I know I'm maintaining the tempo when the loop isn't playing, so the 'Met Follows Playback' feature won't work for me. What I'm hoping to accomplish is to have the metronome stop when I call up a preset that doesn't have an assigned loop. All of my presets that do have loops are fine, it's the ones that don't that are the issue. Any suggestions for that? Right now I have assigned an empty loop to those, to have the metronome off, but that means wasting an entire loop slot. Thanks!
        • 1
        • ·
        • Mar 16
      • Metronome question
        PedroRodrigues Hi JeremyGorman please consider that if you are running the last FW available for the VL3 the implementation is exactly the same between both unit. Unfortunately there are some limitation when it comes to the Metronome implementation. I would suggest to follow the link below to confirm on the manual for your unit if any other implementation ight work for your. Please follow the link below : https://www.tc-helicon.com/tchelicon/product?modelCode=P0DEG
        • Mar 17
  • New
    cwest
    Newcomer - Level 1
    2021-02-15

    Hi. Does anyone know why I cannot adjust my amp gain on certain presets. Global is off. Cheers 

    0 54
    • cwest
      PetGerbil 'cos you've got the "drive" pedal engaged ? (it replaces the gain section on the amp)
      • Feb 15
      • Vl3x amp gain
        cwest Thanks PetGerbil. That’s it. Cheers
        • Feb 15
Go to page