Statistics

298,540 members
182,153 posts
  • New
    Kuli
    Newcomer - Level 1
    2020-12-06

    When trying to connect my X air 18 mixer with Ableton live trial the

    preferences show the results below.

    I repeatedly downloaded the usb-driver from Behringer´s download page

    but it has failed to work so far.

    Ì am far from being an experienced engineer , so who can help me with

    amateur friendly advice?

    Thank you and stay healthy

    Kuli

    read more...
    0 130
  • New
    AaronLane
    Newcomer - Level 1
    2021-11-02

    Hi there,

    Sorry if this has already been asked, but I wasn't able to find it in the forum, and couldn't find my previous post.

    I'm using the M32 Edit software with the M32 mixer and it's great for setting up, fault finding, assiting remotely, etc.. One feature I'm not able to find in it is access to the presets in the mixer's library. I can load scenes and presets from my laptop, and scenes that I have saved on my laptop, but not presets that are saved on the mixer. Is there a way to do this? If not, is there a way to request this feature?

    Thanks in advance, and kind regards,

    read more...
    0 55
    • AaronLane
      Paul_Vannatto Hi Aaron, yes you are correct that the M32-Edit can only access the presets on the laptop, not the list on the console. The dual preset list, like that of the scenes and snippets has been requested before. So far the answer has been no. But I will see if they will reconsider. In the meantime, Patrick-Gilles Maillot (a 3rd party developer) has developed a couple of software tools to get and set console presets. These can be found here:
      https://sites.google.com/site/patrickmaillot/x32#h.tyc86qhculh7
      • November 2, 2021
    • AaronLane
      Paul_Vannatto Evidently there are technical reason why the dual preset list has not been implemented in the X32-Edit or M32-Edit apps.
      • November 2, 2021
  • NadimBakhshov
    Newcomer - Level 1
    2020-10-06

    Hi, I am trying to get the Toneprint Editor on my Macbook but all the links are either dead or simply go nowhere. Any help would be much appreciated

    0 74
    • NadimBakhshov
      john0121 Hi Nadim, same for me. I'll report to the web team to get this fixed. Sorry for the inconvenience.
      • October 6, 2020
    • NadimBakhshov
      NadimBakhshov A friend suggested using a different browser - I navigated to the link via Firefox and it downloaded. All downloaded.
      • October 6, 2020
    • NadimBakhshov
      john0121 I tried on internet explorer (rather than Chrome) and it's worked for me. I've put a copy on WeTransfer here for you.

      https://we.tl/t-ZzCLYnYNHF
      • October 6, 2020
  • New
    benniefolke
    Contributor - Level 1
    2022-03-05

    hi i cant use my tc electronic plugin in logic pro. logic cant find them and they say i need an update from you

    0 16
  • New
    ukkiukkiukki
    Newcomer - Level 1
    2021-02-04

    What is difference between Behringer Synthtool and Synthtribe? 
    Is them working with MacOS Catalina? 

     

    0 1,216
    • ukkiukkiukki
      JoeRivers96 Hi, There is no difference in terms of functionality - this is just a rebranding. Both are compatible with Catalina OS.
      • February 5, 2021
  • New
    DavidML
    Newcomer - Level 1
    2021-03-08

    I am trying to see if there are new presets i can download to my voicelive 2. I read about a 500 pack that was available for free but can't find it anywhere. I also wanted to see if there were any presets for the band disturbed?

    1 79
  • New
    DonShirley
    Newcomer - Level 1
    2021-11-02

    Hi is there any members using Beringer x touch and finding the xtouch is not counting bars, just beats?

    I have mentioned it to tech support and saying it may be a setting in X touch, yet it will count SMPTE or minutes and seconds no problem except for bars and beats.

    It's Mackie control so shouldn't be an issue, as don't have this problem in other daws I use

    read more...
    0 8
  • lpagross
    Newcomer - Level 1
    2020-08-17

    When I want to pan in IEMs fed by mix buses the same as the main LR bus I choose LR PAN on each bus that I want this for on the sends tab, is that correct? Also, what does the power button do to the left of that, why would I want it?

    0 239
    • lpagross
      RexBeckett That is correct. The pan controls on a channel's Sends tab set how the channel is sent to a linked pair of Mixbuses. The button with the power symbol is an enable (opposite of mute) for that channel send. It can be useful to temporarily mute a channel send to a monitor bus without disturbing the send fader setting.
      • August 17, 2020
      • Panning buses
        lpagross That's great, thanks. Why does the main overview show bus sends 3-10 panned in the centre while the channel view & the sends view show the vocal panned +50, to the right? Is it just a problem with the overview showing everything or am I missing something?
        • August 17, 2020
      • Panning buses
        RexBeckett On my copy of X32 Edit V4.1, the pan setting for channel sends to stereo buses shows the same value on Mixer, Channel and Sends tabs. I don't know why yours would behave differently.
        • August 17, 2020
      • Panning buses
        lpagross I think I've found the answer (for me). When I choose LR PAN on the Sends tab the Channel tab shows the buses panned as they are in the LR panning of the channel. However, the Mixer tab still shows the panning that I've set up, but it doesn't affect what I hear. If I go back to the Sends tab and deselect LR PAN then the panning jumps to the setting in the Mixer tab. It may be a fault in the software (X-Edit 4.0.3 Mac OS X).
        • August 18, 2020
      • Panning buses
        lpagross It's been resolved in X32-Edit 4.1 :-)
        • 1
        • ·
        • August 18, 2020
      • Panning buses
        RexBeckett The LR Pan button, when on, copies the channel to bus panning from the channel to Main LR setting. On X32 Edit V4.1 (Windows) this is reflected correctly on all the tabs. It could be a bug in the macOS version.

        Edit: I see you found the cause of the problem. Thanks for the update.
        • 1
        • ·
        • August 18, 2020
  • New
    Cyril2Mars
    Newcomer - Level 1
    2021-12-26

    Hello everybody!

    I bought this umc22 and i can't make it work. I've downloaded asio4all on the berhringer's website and i've installed it but i still can't find my Umc22 as an audio entry in Ableton.

    Thanks for you help and Merry Christamas! :)

     

    read more...
    0 45
    • Cyril2Mars
      lippues Hello everybody

      I have the same type of problem as Cyril2Mars with my new UM2, Windows 11 21H2 (Version 10.0.22000.376), Waveform 11.5.18 and asio4all 2_15_Beta3.
      • Jan 8
  • New
    andies
    Newcomer - Level 1
    2022-02-15

    Hi,

        I purchase a Finalizer for desktop last Sunday February 13, 2022 and didn't received an activation code for iLok. The case number is CAS-546035-F2F6R0. Thank you

    0 19
    • andies
      ChrisEdwards1

      Hi Andies, your case has now been picked up and a response will be sent via the case shortly. Please keep an eye on your spam/junk folder as on occasion we have seen our responses route here.

      • Feb 14
      • Finalizer App for Desktop
        andies Thank you ChrisEdwards1
        • Feb 15
    • andies
      andies Hi ChrisEdwards1, I'm still waiting for my Finalizer app Desktop activation code for my iLOK. I Check my yahoo mail and the spam folder but nothing there. Is there anybody that I can contact regarding the issue? Thank you
      • Feb 17
      • Finalizer App for Desktop
        andies
        • Feb 17
      • Finalizer App for Desktop
        andies
        • Feb 17
      • Finalizer App for Desktop
        PedroRodrigues Hi Andies, thank you for your post, so I can look in to this matter, can you please provide via PM message your ILOK USERNAME. Thank you
        • Feb 18
    • andies
      andies

      Thank you PedroRodrigues. I got my license.

      • Feb 18
Go to page