Statistics

299,780 members
183,557 posts
  • New
    andyp13
    Contributor - Level 3
    2020-11-15

    Updated to new 1.09 Firmware on the Wing - the DAW options are not available anymore, the menue goes of the screen and the 'full' DAW option can not be accessed any more. So much for testing eh?

    If anyone has a work around please could you email me as I will never be able to find this post ever again once I have pressed send.

    [email protected]

    Thanks

    read more...
    0 97
  • New
    linus60
    Newcomer - Level 1
    2021-09-15

    Hello,

    yesterday I registered two products by Behringher (502, X1024 USB) I bought time ago and now would like to know how can I retrieve the code I need to activate the software in the subject.

    At the Tracktion website users are told that after registering Behringer products this code is sent via email but I still didn't receive it my recipient. Could you please tell me how can I retrieve it?

    Thanks.

    read more...
    0 79
    • linus60
      Nigel67 Hi linus60. Can you give me the case number(s) that you registered the products with us on please. If you haven't registered the products with us yet, please fill out a Product Registration Ticket. This can be done by clicking on the support tab at the top of the page. A new window will open. Scroll down and click on the Product Registration tab and submit a ticket. We will then send you the Traktion codes. Many thanks
      • September 15, 2021
    • linus60
      linus60

      Hello,

      I registered two analog mixers by Behringer:

      1) 520 - SN: S1438241576
      2) X1024 USB - SN: S1425975A0H

      So said, I suppose, I should be eligible in receiving two codes.

      Hope so.

      • September 16, 2021
  • AlexMorrison
    Contributor - Level 2
    2020-08-23

    Hey guys,

     

    My band and I are looking to try to use our X32 and or our XAir18 as audio interfaces with OBS to stream to Twitch and Facebook Live. We've got everything connected, but can't seem to get audio from the interface itself into OBS.

    For reference, we are running our X32 into a Macbook Pro 2019 via USB (using the X32 as the main audio device) from the X32 Card Out.

    We were successful in setting the X32 as the main audio device in a Zoom call for a couple of friends, but due to security concerns with Zoom, we wanted to go through a streaming service to get better security and control.

     

    Does anyone have experience with this or know what to do? Do I need extra software? Do I need an extra piece of gear? I can provide screen shots and things.

    Thanks for any help.

    read more...
    0 103
    • AlexMorrison
      DaveMorrison You don't need anything extra. It's just a question of routing the right signal to USB 1&2. On the X32 you need to set routing in two places. (These example refer to X32-Edit 4.1 which will run on your Mac - This version runs with firmware 4.0.2). These screenshots will send the Mainbus LR to USB 1-2.
      • August 23, 2020
      • X32 / XAir18 Streaming Connection?
        AlexMorrison Awesome dude, thanks so much for the response. I'll try it out tomorrow and let you know the result!
        • August 24, 2020
    • AlexMorrison
      AlexMorrison Dave, thanks so much for the help. Everything seems to be working.
      • August 25, 2020
    • AlexMorrison
      AlexMorrison Dave, thanks so much for the help everything seems to be working.
      • August 25, 2020
    • AlexMorrison
      AlexMorrison Dave, thanks so much for the help. Everything seems to be in working order.

      I did have another question, I'm running some IEM units into outs 1-10 (5 stereo pairs) so I'm wondering, can the IEM still be used with outs 1-2 since they're going to USB now? Can I change the USB outs to a different pair or is the X32 taking ONLY USB 1&2?
      • August 25, 2020
    • AlexMorrison
      DaveMorrison The Busses and the outputs can be separate. You can use outputs 1&2 for IEMs. The reason I set up USB 1 & 2 is that most software will only accept USB 1 & 2. I seem to recall that OBS has a plug-in for multi-channel operation (I could be wrong). On windows you windows, you would need access to the ASIO driver. I haven't my X32 to OBS via USB because I'm using it for other purposes. I wish we had 2 or 3 USB (host) ports on these awesome mixers.
      • August 25, 2020
  • RWelker
    Newcomer - Level 1
    2020-07-16
    Hello, which additionally hardware on my computer do I need for to connect the digital output to my computer, because my soundcard does have only analoge input, but no digital input like necessary for communicate via AES/EBU which is digital only? Thank you for your feedback!
    read more...
    0 207
    • RWelker
      Paul_Vannatto That is a pretty old model and you will probably spend as much for an AES/EBU computer interface as you would if you got something like the Behringer UMC202HD (https://www.sweetwater.com/store/detail/UMC202HD--behringer-u-phoria-umc202hd-usb-audio-interface)
      • July 16, 2020
    • RWelker
      RWelker Hello, this device looks really nice and is not too expensive. Does this means that the internal converted signal from analog to digital can be transferred via USB to my computer and can directly used by my DAW (Cubase)?
      • July 16, 2020
      • Behringer "Ultra Voice Digital VX2496" connect to a computer via AES/EBU
        Paul_Vannatto Yes that is correct
        • July 16, 2020
  • BarryDunn
    Newcomer - Level 1
    2020-10-16

    I have been recording from my x32 card into Studio One and recently my eq sounds like the vocals are in a cave during playback. I have been recording with the same set up for years with no problem. I do not know if it is related to a firm ware update. Any ideas ?

    read more...
    0 65
    • BarryDunn
      DaveMorrison Have you loaded a backup scene to see if it's just a corrupted scene. I've found that my main scene gets corrupted over time—It is a computer after all. Could be corrupted firmware also, but I'd check the scene first.
      • October 15, 2020
    • BarryDunn
      BarryDunn I have been in the same scene. I'll check that. Thanks Dave... Will let you know.
      • October 15, 2020
  • New
    Sushantduggal
    Newcomer - Level 1
    2020-12-16

    Here's the deal. 

    I have a yamaha RX-V485 receiver and Behringer   1202FX mixer. I want to route the video to projector (hdmi out) from my receiver, and at the same time I want to route the audio to the mixer. I am not able to do this, is there someone experienced same problem? Attached the workflow  

    Thanks!

     

    read more...
    0 97
  • New
    andreasgiamakis1974
    Newcomer - Level 1
    2021-01-02

    DIDN'  T WORK  INST 2  CONNECTION

    0 97
  • New
    lu15
    Newcomer - Level 1
    2021-01-02

    Good Morning from Italy,

     

    I'm a "home-singer" and I received as a present for my birthday U-PHORIA STUDIO PRO.

    I'm definitely bad with technology, but I'm trying every way to start using it: no way to download the necessary ASIO driver.

    Can someone help me with this and also the other necessary softwares? I have Windows10.

    Otherwise I will have to return this product :(

    Thank you in advance!

     

    Luca

    read more...
    0 106
    • lu15
      RexBeckett Hello Luca, the U-Phoria Studio Pro package includes the UMC202HD USB audio interface. You can download the driver for this by clicking on Software on the right side of the product page (link below). Scroll down to find UMC Driver 4.59.0 for Windows 10.

      You will also need Digital Audio Workstation (DAW) software. To get started, try Audacity which is simple to use and free. Download from here: https://www.audacityteam.org/download/

      UMC202HD product page:https://www.behringer.com/product.html?modelCode=P0BJZ
      • January 2, 2021
      • U-PHORIA STUDIO PRO
        lu15 Hi Rex, I managed to download the driver and to make a first audio regsitration with audacity. I had only one problem exporting the registration in wav or mp3, I can't hear the files...do you know why? Please let me know asap!
        • January 2, 2021
      • U-PHORIA STUDIO PRO
        RexBeckett Can you hear the recordings when you play them with Audacity? If so, it may be that you have exported them in a format that is not supported by your player. Some players only support certain sample-rates, bit-depths and file formats.
        • January 3, 2021
    • lu15
      lu15 Hi Rex, thank you infinitely for the quick reply! I try and then I come back to you ;) Happy New Year!
      • January 2, 2021
  • New
    BDeMarco
    Newcomer - Level 1
    2021-08-31

    Can anyone tell me if Mac OS Big Sur and Behringer U-phoria UMC404HD are compatible?

    I have been waiting to upgrade the OS but have not been able to verify compatibility yet.

    Thanks!

    Bill

    0 340
    • BDeMarco
      Nigel67 Hi BDeMarco. Yes, they are compatible. All our USB USB audio / midi devices are fully UAC2.0 class compliant and do not require drivers under MAC OS and will continue to work under CoreAudio as before. Any audio issues will most likely be DAW related or in Apples domain. The only issue you may come across is a security issue with the Mac application firewall, but this can be overcome via the link below and reading the section titled 'Allowing specific applications'.
      • August 31, 2021
  • New
    NiclasEngstrm
    Newcomer - Level 1
    2021-01-03

    I cant get the midi out to work on my Behringer xr18. I have tried all channels on all my synths connected to the xair xr18, no reaction. (I have double checked with a midi-keyboard, from which all syths work)

    The xr18 midi out is visible in Cubase, and I run the latest driver. All sound inputs and outputs work on the XR18. 

    Any tips?

    read more...
    0 139
    • NiclasEngstrm
      RexBeckett Hello Niclas, have you enabled USB-DIN Pass Thru on the XR18 Setup -> Audio/Midi tab? This is required when using the XR18 as a Midi interface.
      • January 3, 2021
      •  Behringer XR18
        dschamus Hello RexBeckett: I have a similar problem. I have an old Yamaha PSR 510 keyboard with MIDI in/out DIN jacks. I have checked the USB-DIN Pass Thru box in the setup menus but still cannot get MIDI musical data to be received in Pro Tools over the USB connection even though, like NiclasEngstrm the software sees the existence of MIDI channels on the XR18 - Thanks in advance if you have any other suggestions.
        • Jan 30
Go to page