Statistics

289,494 members
172,011 posts
  • ChaseMcKnight
    Triber Contributor
    2016-02-23
    Dear all,

    We're pleased to announce the release of our latest M32 firmware, V 2.16.

    M32 Firmware Update Version 2.16

    The M32 Firmware Update V 2.16 features performance enhancements to the MIDAS M32 operating system. The Version 2.16 firmware improves the main display UI refresh and fixes some small glitches.

    MIDAS is constantly adding new features and making enhancements to this extremely stable operating system, so that you always experience the best possible performance from your M32. Visit midasconsoles.com and check for updates regularly.

    Note: It is recommended that you backup all data (export Show and Libraries to USB) before updating, as a firmware upgrade may erase data currently stored on your M32. Please be aware that firmware 2.16 should be used with M32-Edit 2.5 on PC / Mac / Linux computers in wired networks, and with M32-Mix 2.2 or higher on Apple iPads (min. iOS 7) for wireless networking.

    Enhancements:

    - GUI drawing routines significantly accelerated

    - Fixed DIN midi remote control problem

    - Channel group assignments synced when fader link option is reselected

    - EQ gain center led only lights up when gain is exactly 0 dB

    - Indication of hard mute state, shown on meter pages with a dark red fader knob

    - EQ band reset bug fixed

    - Ducker attack and release times fixed (were swapped since 2.10)

    - Routing page tab “p16 out ” renamed to “ultranet ”
    read more...
    1 7,550
  • ChaseMcKnight
    Triber Contributor
    2015-09-25
    Dear all,

    We're pleased to announce the release of Version G3.2.2 for PRO1, PRO2, PRO2C, and PRO X consoles.

    Addressed Issues:
    - Fix issue with reordering POP and VCA groups in user mode on the Pro 2
    - Fixed a DSP crash and noise issue caused by a limited number of effect configurations
    - Improved a noise issue with Pitch Shifter effect when used in certain circumstances
    - Resolved an issue which could cause the desk to boot with a white screen on the GUI
    read more...
    1 7,124
    • ChaseMcKnight
      GuntherMai I had this pop group user mode reorder issue freezing not only the related pop group when pressing but all other pop groups, the automation and the GUI access buttons from time to time on my pro1.
      Hope this horrible thing is not only fixed for pro2 but also for pro1 Smiley Sad
      • September 25, 2015
    • ChaseMcKnight
      GuntherMai Updated the pro1 today but the user pop group reorder issue persists. Have spent much time for seeking a work arround in the last weeks so I'm a bit disappointed.

      After selecting user pop group mode, ordering or reordering channels in that user pop group by either hardware buttons or GUI seems to work. After storing this in a scene, saving show and reloading show file and scene it works as long as i recall 'old' pop groups. When i select a stored user pop group for the first time after reload, the pop group function freezes in total, no more pop groups can be selected, the automation shows no more sceens and the GUI access buttons are frozen too.
      After the corruption changing the show file and even rebooting the console gives the same result. Console with different show file works up to the moment i select a configured user pop group and the freezing issue appears.
      When i load a show file that contains absolutely no scene with user pop groups but solely with 'old' pop groups the issue disappears and after that next loaded show files containing scenes with user pop groups seem to be repaired and work when recalling user pop groups as normaly expected. This works just to the moment i reorder and save user pop groups and the corruption starts again.
      Hope for help for the pro1.
      • September 26, 2015
    • ChaseMcKnight
      ClaudiuRusuCost Cannot find Midas PRO1 on website:
      http://www.music-group.com/Categories/Midas/Mixers/Digital-Mixers/c/4234021?colExpFlag=,Mixers
      Cannot find the firmware for it...
      Loud noises from the effects are not funny.
      • October 15, 2015
    • ChaseMcKnight
      DevisPavan Hello,
      I've seen there is a new firmware for PRO1, the 3.2.3, but I can't find any release note...
      What's new?
      thank you,
      devis
      • October 19, 2015
  • JoeSanborn
    Contributor - Level 2
    2015-03-02
    Real Name Policy

    Dear MIDAS, KLARK TEKNIK and TURBOSOUND Forum User,

    In the interest of a more professional, courteous and respectful atmosphere we are converting our forum user registration names to “Real Names” from artificial user names. Kindly review the policy stated below to better understand why we are making this change and how you can change your user name to your real name.


    MIDAS, KLARK TEKNIK and TURBOSOUND Forums “Real Name Policy”

    Thanks for your interest in the MIDAS, KLARK TEKNIK and TURBOSOUND forums. Before you can post you’ll need to set up an account using your real name in your profile. We use a “Real Name” policy as a means of preventing spam, distasteful or disrespectful posts and other content that is contrary to the stated objectives of these forums. We want this to be a place where MIDAS, KLARK TEKNIK and TURBOSOUND owners, users and prospects can talk about their experiences and share their knowledge with one another.

    What’s In a Name?

    When we say “Real Name” we mean the name that everyone knows you by; not necessarily what’s printed in your passport. Of course your last name (family name) needs to be as printed in your legal ID but your first name might be a shortened version or derivative. Or, it might be a middle name that is how everyone knows you. Either way, the intent is that if your real name is “Jonathan Edward Smith” you could list it as John Smith, Ed Smith, Edward Smith or Johnny Smith if that’s how people know you; you just can’t call yourself “Johnny Appleseed”.

    When registering, make sure to format your username as two capitalized words, such as "Joe Sanborn", as opposed to "joe sanborn", "JoeSanborn" or "jsanborn"

    For those of you with unusual first or last names, or that typically use initials, this will help keep your registration from being deleted. We get dozens of SPAM registrations per day and usernames rendered as one word in all lowercase are virtually impossible to distinguish from the SPAM accounts.

    What If I’m Already Registered with a Pseudonym?


    You will need to edit your profile to update your current name to your real name. Your login name will therefore be your real name and will appear on all posts and responses. You may use up to 30 characters, including spaces so you may include a middle name if space permits.

    Thank you for your continued interest in our forums.
    read more...
    1 6,998
    • JoeSanborn
      JoeSanborn Our Guide to Forum Etiquette

      Your Reputation, Image and Behavior

      Too often, the anonymity of the internet is exploited. Internet users behave in ways that they would not behave in face to face situations. As forum users we need to employ greater self-awareness and sensitivity to the tone and presentation of our posts.

      We must not forget that we are talking to real people! We are all participating in a fast-paced environment where we lose the subtle advantages of body language to read intentions. This absence of indicators, which normally helps us to decipher tone and intention, can pose problems. In the absence of these valuable traits (voice tone, facial expressions, body language and other social cues) the judicious use of emoticons and well considered language can help make tone and intention clear and polite to our fellow forum users.

      Good etiquette shows respect for others. The anonymous, distant nature of the internet should not encourage a disregard for the importance of mutual respect and good manners. Being curt with someone, offering clipped responses, using abusive or derogatory language to demean a fellow user or their opinions or showcasing bigotry, vulgarity, racism or profanity should not be considered acceptable behavior. Remember: you may be anonymous but every post you make contributes to your online reputation and image. Don’t do yourself a disservice by behaving otherwise to how you would behave in face-to-face situations.

      MUSIC Group Forum is an open minded and progressive platform to discuss audio technology, products and most of all helping other users. No one opinion is “right” or “wrong” and debates which aim to prove or disprove another’s point of view, is futile. It’s far better to embrace the freedom that a forum offers to openly share in different perspectives and opinions.

      Most importantly: have courtesy, respect, a sense of humor and try not to take things too seriously. The forum should be enjoyable for everyone and even the most controversial and serious of topics can be explored with a light heart.

      On the forums, as in real life, proper etiquette is essential to getting far. Not only does it reflect upon the type of person you are but it also reflects on the clan you are in, if you are in one. Proper grammar and spelling does not only benefit you but it also makes reading posts easier on others, on your peers. Although this might seem like an asinine guide, it is needed.

      Use correct spelling

      I know that the forums consist of many different people from all over the world, many of whom do not have English as a first language. Typos happen and are an acceptable fact of life but if you can just read over what you wrote before you post it you can save everyone a lot of time and yourself a lot of trouble. If your post is filled with spelling errors chances are multiple people will say something about it, usually requesting you to change it. Make your life easier!

      Use an open mind

      Just because you disagree with someone does not mean you should go off flaming them and spamming on their thread. Be considerate! No one likes a flamer/spammer!

      Use the search tool

      Before posting, take a second and use the search function to see if anyone else has already posted about this. If you use the search button no one can blame you if your's isn't the first post after all.

      Use private messages

      When you need to talk to one person specifically don't post a post directed to them and only them. Send them a private message! Not only is this easier on you and them and keeps a thread 'cleaner' for others to read.

      Use relevant material

      Pretty much stay on topic. If for some reason a post goes off topic, don’t join in. If you want to talk about something off topic, create a new thread in the appropriate board. Out of context stuff should be just that, out!

      Use your eyes

      Read what other people have posted. Don’t look at the first post on a ten page thread and reply strictly to that. Read some of the more recent posts in that thread. Hand-in-hand with this is to not restate what someone else already posted. If someone answers a question on the Q&A board, don’t reply unless your adding to what was already said. Repetitive posting is just a waste of time.

      Do not flame

      Flaming, in the most common sense definition, is saying something negative in an attempt to get a more negative response. This is completely and totally unacceptable; it will not be tolerated. Never resort to personal insults, never extend a debate beyond the topic on hand needlessly, and try to avoid patronizing language.

      Do not troll

      Trolling is considered one of two things. Either continually running a topic into the ground incessantly, or dragging up old arguments against a specific user/group/etc. long after their appropriate discussion and targeting them specifically in arguments needlessly. Trolling is the first step towards outright harassment of other members. This is the single biggest no-no in the community. Letting every argument drop isn't always a possibility, but learning when to let things go is a valuable tool, and not just in this community.

      Do not spam

      Repetitive posts by one user, or posting a new thread when one is already easily accessible can be considered spam. It's hard enough to let players easily track this forum's community as days go on, they don't need to wade through two dozen threads about the same new weapon every day. Try searching, or at least making sure there are no fitting topics in the news or on the first page of the forum you're in.

      Do not use obscene/vulgar language or pictures

      This is self-explanatory. Purposeful violation of any bad language filter set up is grounds for serious sanctions.

      Critiquing posts

      The forum invites critiques from members on an array of topics and this is a wonderful learning tool if handled properly. But remember, criticism must tread a fine line. If criticism is aggressive, belittling or dismissive of alternative opinions it may dissuaded people from sharing their thoughts. Equally, if criticism is dishonest or intentionally biased it works against truth and no one will learn. Both extremes defeat the purpose of the forum.

      If you are being critiqued: do not take the criticism personally. It is opinions and ideas that are being critiqued, not you personally. With all criticism, evaluate it objectively and decide if you can use it to further a discussion. If you can't, then put it totally out of your mind.

      Absolutely no personal attacks under any circumstances. Do not feel compelled to defend your honor in public. Egos should not punctuate forum conversations. Posts containing personal attacks will be removed and may result in an account being suspended.

      Etiquette in threads

      Do not “hijack” threads by disrupting a current line of discussion among members. Interrupting the course of a discussion by breaking it up with sequential links to articles or raising a divergent topic for discussion is in poor form. If you’d like to discuss a different issue or post a stream of links to new articles, it’s best to start a new thread.

      Never target a fellow forum participant with derogatory, belittling, aggressive or personal remarks. You may not agree with their opinion, but that does not permit you to behave inappropriately towards them.

      If a user has a problem that they’d like to address with another individual, it’s best to discuss the issue off-forum rather than in the public setting. All differences should be worked out politely and respectfully.

      Never make derogatory remarks about the forum, its staff or formal editing decisions on the public boards. We invite feedback from all our users however, this needs to be done via the private messaging system or the report functions. And please remember, there’s a fine line between constructive and non-constructive criticism.

      Censorship and Legal Actions

      While we actively post-moderate our forum messages, due to the nature of the Internet sometimes things can get "out of hand". People may start to attack others in a personal often alarming manner. In these instances we will do our best to cancel/remove the account of the perpetrator. Your own perceptions of "what is offensive" do not apply.

      We will cancel/remove accounts at our discretion only. Do not threaten us with "legal action" in any form or shape as this will result in immediate cancellation of your account. The forums are public places of debate, if you do not like someone's message then ignore it. We will not support any legal activity or claims unless specifically directed to us by a solicitor / law firm or law enforcement agency. We and we alone decide if a forum post violates our terms and conditions and it is left up to us if we should remove such a post. The majority of the time we will respect your wishes, but we and we alone make the final decision and there is no appeal process.

      Dealing with a violation as a user

      Scenario: You're minding your own business reading a thread or scrolling down the Recent Topics list and you come across what looks like spam, a troll, flaming, off-topic discussion etc. What do you, as a user, do?

      The answer: Don't get involved. Involving yourself in a violation results in both a continuance of the violation and the possibility that you might end up violating the forum guidelines too. Above each user's post, there is a small button that says "Report." If there aren't any moderators around, go ahead and click it. The team will deal with the matter as swiftly as possible.

      Administrators and Moderators

      We’re here to help.

      We’re all approachable and we’re here to keep the forum a safe and enjoyable place for everyone, today and into the future;

      • Respect the decisions of the team; they have been made objectively to uphold the forums’ policies and protect the experiences of our users;
      • Do not publicize private conversations between yourself and staff or fellow users. It’s only polite to uphold discretion.
      • March 2, 2015
  • ChaseMcKnight
    Triber Contributor
    2017-01-12
    Dear all,

    We're very pleased to announce the release of firmware G3.4.2 for PRO1, PRO2, PRO2C, and PRO X consoles!

    Version G3.4.2
    This document constitutes a formal release of Pro 1/2/2C/X software for public usage.

    New Features

    No new features - this is a bug fix release only

    Addressed Issues

    - Neutron: Update Neutron DSP Audio FPGA
    - Neutron: Update PROX altona layout
    - Neutron: Add set command for mgt link 1 on audio fpga
    - Effects: Fixed issue where GEQ parameters could cause Spectrum Analyzer to reboot

    Update Procedure
    Update procedure for Pro X console From G3.2.x to G3.4.2 with new Neutron NB expansion module attached.

    N.B. Update of Neutron NB “IO Card” will require Pro X system to be on compatible build before NB module is recognised. This will mean that on the initial update from G3.2.6 or earlier the following steps will be required for a one off update.

    1. Download the ".tar" update file for your console
    2. Copy the file into "DL1upgrades", "DL2upgrades" or "DL3upgrades" for Pro 1, Pro 2/2C or Pro X respectively
    3. Run the Updater for G3.4.2 via USB as normal
    4. Update full Pro X system from G3.2.x to G3.4.2
    5. Power cycle system twice (as per-normal)
    6. Run G3.4.2 updater via USB again
    7. Update IO Card to G3.4.2
    8. Power cycle system twice

    From this point The Neutron NB expansion module (a.k.a “IO Card”) should be recognised by both the Pro X system and the Pro X updater app (USB updater).

    Once the system has reached this point the whole system, including the Neutron NB expansion module, can be updated in the regular way with only one pass of the updater application.

    Update procedure for

    - Pro 1
    - Pro 2 and Pro 2C
    - Pro X system WITHOUT Neutron NB installed
    - Pro X system WITH Nuetron NB and G3.4 or G3.4.1 already installed

    Regular update procedure using USB stick

    1. Download the ".tar" update file for your console
    2. Copy the file into "DL1upgrades", "DL2upgrades" or "DL3upgrades" for Pro 1, Pro 2/2C or Pro X respectively
    3. Run the Updater for G3.4.2 via USB as normal
    4. Update full Pro X system to G3.4.2
    5. Power cycle system twice (as per-normal)
    read more...
    3 6,847
  • ChaseMcKnight
    Triber Contributor
    2016-09-07
    G3.4.1 PRO1/2/2C/X

    Version G3.4.1 (01 September 2016)

    This document constitutes a formal release of PRO1/2/2C/X software for public usage.

    NEW FEATURES
    No new features - this is a bug fix release only

    ADDRESSED ISSUES
    • Neutron NB: Dante CM-1 persists internal configuration over power cycle
    • Neutron NB: Improved stability of CM-1 start-up in Neutron NB
    • Updater: Fixed redboot issue for TFTP update
    • Updater/DN9680: Improved stability of IO unit detection in updater app when updating units via DN9680 network
    • Groups: Right channel of Overlay Stereo Pairs in VCA/POP now selected by tapping channel
    button on Input bay as well as output bay
    • Effects: Fixed text display issue for Automixer when called in FX mode
    • Effects: Reverb M350 wet setting is now fully wet.
    • Effects: Resolved issue where Pitch Shifter could cause noise when used in conjunction
    with reverbs

    UPDATE PROCEDURE

    Update procedure for PRO X console From G3.2.x to G3.4.1 with new Neutron NB expansion module attached.

    N.B. Update of Neutron NB “IO Card” will require PRO X system to be on compatible build before NB module is recognised. This will mean that on the initial update from G3.2.6 or earlier the following steps will be required for a one off update.

    1. Download the “.tar” update fi le for your console
    2. Copy the file into “DL1Upgrades”, “DL2Upgrades” or “DL3Upgrades” for PRO1, PRO2/2C or PRO X respectively
    3. Run the Updater for G3.4.1 via USB as normal
    4. Update full PRO X system from G3.2.x to G3.4.1
    5. Power cycle system twice (as per-normal)
    6. Run G3.4.1 updater via USB again
    7. Update IO Card to G3.4.1
    8. Power cycle system twice

    From this point The Neutron NB expansion module (a.k.a “IO Card”) should be recognised by both the PRO X system and the PRO X updater app (USB updater).

    Once the system has reached this point the whole system, including the Neutron NB expansion module, can be updated in the regular way with only one pass of the updater application.

    Update procedure from G3.2..x or G3.4 to G3.4.1 for
    • PRO1
    • PRO2 and PRO2C
    • PRO X system WITHOUT Neutron NB installed
    • PRO X system WITH Neutron NB and G3.4 already installed

    Regular update procedure using USB stick
    1. Download the “.tar” update file for your console
    2. Copy the file into “DL1Upgrades”, “DL2Upgrades” or “DL3Upgrades” for PRO1, PRO2/2C or PRO X respectively
    3. Run the Updater for G3.4.1 via USB as normal
    4. Update full PRO X system from G3.2.x to G3.4.1
    5. Power cycle system twice (as per-normal)
    read more...
    1 6,757
  • New
    Music Tribe
    Triber
    2021-01-06

    Chuck Surack, CEO of Sweetwater, and Uli Behringer, CEO of Music Tribe, today announced the entering of an industry-first strategic relationship. The focus of this Super Partner relationship is to deliver an obsessive Customer Experience with unique collaborative opportunities to realize co-innovation of new products, co-marketing related to learning and education as well as a unique EDI collaboration to ensure all products are always in stock and readily available - now at up to 40% reduced prices.

    Sweetwater’s CEO, Chuck Surack, commented: “This unique opportunity as a Super Partner with Music Tribe fits neatly into our vision and enhances our ability to serve our customers’ needs. With this factory-direct relationship, we expect that in the near future our customers will experience a noticeable increase in availability of Music Tribe products. In addition to carrying over 1,000 Music Tribe products, we are delighted to provide best-in-class technical support and service for our customers. It’s a win-win for everyone.”

    Music Tribe’s CEO, Uli Behringer, commented: “With this new setup, all our Retail products will now go through e-commerce channels, while AVL Media Group (www.avlmediagroup.com) will act as Music Tribe’s dedicated US distributor for the Install as well as the Live and Tour Sound Enterprise market, who will continue to serve all our valued integrators and contractors.”

    We are extremely honored and thrilled to enter this truly purposeful relationship with Sweetwater, who will serve our retail customers with Music Tribe’s entire offering of Retail brands and products. For decades, Sweetwater has been leading the industry through unsurpassed Customer Experience, which matches Music Tribe’s Customer Obsession Vision. This strategic relationship will now open the door for a deep integration and collaboration – all for the benefit of the Customer.

    How will the Customers benefit from this new Super Partnership?

    1. Product Availability.
    Music Tribe is one of the very few companies in the industry that manufactures nearly all its products in-house (https://www.youtube.com/watch?v=08yTRb69AVw). This allows us to ship all our products from our China and Malaysia factories directly to Sweetwater’s warehouses, saving huge time and cost resources. Our Customers will now enjoy much faster access to new products, plus a cost reduction of up to 40%, in line with our philosophy to pass on savings to our Customers.

    2. Innovative Solutions.
    Sweetwater’s tremendous product and market knowledge will enable huge opportunities around co-innovation for new products. With Music Tribe’s 8 global Innovation Centers and 400+ world-class engineers, we will be able to turn around product ideas in record time. We’ll soon be rolling out a Customer Co-Innovation application process that will allow our Customers to directly participate in the definition and design of new solutions, products and features.

    3. Product Marketing.
    Both Sweetwater and Music Tribe will collaborate in the creation of digital learning and education content in order to help Customers in maximizing the usage of Music Tribe’s products.

    In the coming year we will be launching our Music Tribe Academy, an interactive Learning Management System, where our Customers and Partners can co-create courses as well as other content.

    4. Customer Service.
    With the setup of this new strategic relationship, Sweetwater will be directly supporting and servicing all Music Tribe products through its own Call Center and inhouse Service Facility.

    Music Tribe will serve Sweetwater with global support services as well as spare parts supply directly from our factories, hence drastically improving the product turnaround time.


    Music Tribe’s Retail products do enjoy an industry-leading 3-year warranty upon registration at Music Tribe’s Community (https://community.musictribe.com/).”

    Music Tribe’s COO David Hunter added: “We are truly excited about this wonderful relationship with Sweetwater, while now taking it to a completely new level. We’re currently reinventing our whole organization by means of extreme digital transformation and automation of all repetitive processes. Our objective is to become a highly strategic and insight driven organization, and we’re currently investing over USD 50M in fully automating our current China operation. Last year we acquired 50 acres of land in Malaysia where we’re planning our second fully automated manufacturing plant.

    We’re very proud to have entered into strategic relationships with Microsoft and Siemens around a state-of-the-art 4.0 factory
    (https://www.plm.automation.siemens.com/global/en/our-story/newsroom/music-tribe-electronics-smartfactory/87404) in line with our relentless execution on our Customer and Digital Obsession Vision.”

    read more...
    4 6,702
    • Music Tribe
      GaryHiggins I was hoping this would transpire! Couldn’t be happier.
      • January 9, 2021
      • Sweetwater and Music Tribe to Enter Super Partner Relationship
        Paul_Vannatto I agree Gary. It looks very promising.
        • 1
        • ·
        • January 9, 2021
    • Music Tribe
      TroyPollard Awesome! Sweetwater is one of the retailers I have used for years!
      • January 11, 2021
    • Music Tribe
      rikpaint Not included in e-mail release the dumping of a bunch of indendenant retailers to give Sweetwater market dominance, leaving folks who prepaid for equipment and have been waiting months having their orders cancelled, also now stuck in limbo on a defective X-Touch that had to be returned via the independent retail with no idea how it is going to be replaced. :(
      • January 12, 2021
    • Music Tribe
      LetitiaRowena

      Thanks for sharing, great article. I usually listen to free music at the app, download the app at https://modpree.com/

      • December 16, 2021
  • CarloFontaine
    Contributor - Level 1
    2015-10-22
    Hi,

    I noticed the firmware 3.2.3 is out for Pro Series, but I can not find the release notes for it. I don't like doing an upgrade without knowing what is going to change...
    Also the user manuals for the PRO consoles are not available from the download section. You have to search third party websites to find one.
    Is there a way to subscribe to RSS feeds to get noticed when a new FW is released ?

    Rgds,
    Carlo
    read more...
    1 6,658
    • CarloFontaine
      AndrewSpadzinsk I was looking for the documentation for the Pro 1 Console so I could see what was changed with the new 3.2.3 firmware ... this is what the link shows ...

      The requested URL /media/PLM/data/docs/P0AS4/MIDAS_PRO1-IP_P0BNI_Product_Information_Document.pdf was not found on this server.
      • October 22, 2015
    • CarloFontaine
      CarloFontaine Looks like manuals are added again to the download section.
      But still the old versions Issue A, Oct 2011
      • October 27, 2015
    • CarloFontaine
      DaveHaggerty
      Carlo Fontaine;61664 wrote:
      Hi,

      I noticed the firmware 3.2.3 is out for Pro Series, but I can not find the release notes for it. I don't like doing an upgrade without knowing what is going to change...
      Also the user manuals for the PRO consoles are not available from the download section. You have to search third party websites to find one.
      Is there a way to subscribe to RSS feeds to get noticed when a new FW is released ?

      Rgds,
      Carlo



      Hi Carlo,

      I recently upgraded to 3.2.3 and had an issue with my pop groups not responding on occasion. In one instance, the console froze up and I had to restart--luckily this was before doors opened. I've been able to create pop groups, but when I hit the button to access the group, it's sometimes slow to respond or does not function. Other times it works out just fine. I'm not sure if anyone else has had an issue with pop groups with the new update, but figure I'd share.

      On the plus side., the RTA is convenient, and the user group is a nice feature that allows you to re-order your channels in a specific group.
      • November 7, 2015
    • CarloFontaine
      GuntherMai @ Dave
      Did you read my description of the user pop group reorder issue in V3.2.2?
      • November 9, 2015
    • CarloFontaine
      ChaseMcKnight
      Dave Haggerty;62689 wrote:
      Hi Carlo,

      I recently upgraded to 3.2.3 and had an issue with my pop groups not responding on occasion. In one instance, the console froze up and I had to restart--luckily this was before doors opened. I've been able to create pop groups, but when I hit the button to access the group, it's sometimes slow to respond or does not function. Other times it works out just fine. I'm not sure if anyone else has had an issue with pop groups with the new update, but figure I'd share.


      Hi Dave,

      Welcome to the forums. When you upgraded to G3.2.3 did you power cycle the desk a few times? Have you contacted our Midas CARE team?
      • November 9, 2015
  • ChaseMcKnight
    Triber Contributor
    2015-12-08
    Dear all,

    We're pleased to announce that M32-Mix V 2.3 is now available for download.

    M32-Mix for MIDAS M32 Digital Mixing Console

    M32-MIX remote control and offline editing software provides comprehensive control over all mixing and routing functions of your MIDAS M32 consoles right from the convenience of your iPad®.

    From on-stage monitoring sound checks, preamp and channel processing control, to editing the console's onboard effects racks, the M32-MIX app allows the operator to control the M32 with unlimited flexibility and ease of use.

    M32-MIX gives you the freedom to move about the venue, in order to achieve the maximum performance of your system. Just connect the iPad to your wireless network and assign a static IP address to all consoles wired to that network. The M32-MIX app will connect to that IP address showing the type of console while connecting. No additional hardware, no computer and all extremely easy. M32-MIX unleashes an abundance of remote functionality for the MIDAS M32 series of digital mixing consoles.

    KEY FEATURES
    * Control over Input Levels, incl. Preamp Gain, Low Cut, Phase, Phantom Power
    * Configure the LCD Scribble Strips, incl. colors, icons and names
    * EQ-curve control for fine-tuning the equalisation from anywhere in the room
    * Real Time Analyser when editing EQ
    * Metering overviews with all levels at a glance
    * Individual input channel Sends to all buses
    * Sends on Faders feature for rapid stage monitoring setup from your iPad
    * Detailed editing of channel preamp, gate, dynamics, equaliser, bus sends and LCD scribble strips
    * Complete editing of M32 onboard effects rack
    * Scene management and control functions
    * Routing to Behringer ULTRANET P16 personal monitoring system
    * 6 aux, 2 USB recorder and 8 effects returns levels
    * 16 aux bus, 6 Matrix, Master LCR and 8 DCA levels
    * Mute lock-out feature prevents accidental muting
    * Connect multiple iPads® simultaneously

    REQUIREMENTS
    * Compatible with any iPad running iOS 6.0 or higher
    * Requires a wireless router connected to the M32
    * M32-Mix 2.3 requires M32 console firmware V2.14 or higher to be installed on the console


    WHAT'S NEW IN VERSION 2.3.0
    New Features & Improvements
    * RTA
    * EQ on the Effect Return channels
    * DYN/EQ processing order option
    * Hard Mute behaviours
    * On button option for mutes

    Lots of smaller bug fixes & graphical improvements
    read more...
    1 6,611
    • ChaseMcKnight
      JohnNourse Have not downloaded it to our iPad yet but for us the most important upgrade would be to let the app still work when show control on the X32 is set to Cue.
      When this is set for older versions the app is DISABLED ! Has this been fixed ? It says that the app now works with version 2 + of the firmware so can it work with show control set to Cue ?

      John
      • December 11, 2015
    • ChaseMcKnight
      DanSingletary Hi,

      I just wanted to throw in my ask for cue support on the M32 Mix app for some future release. Ideally, this would be implemented in such a way that you would be able to access the "GO" button, and the next/last buttons at all times in the app -- or, at a minimum, in the DCA page. I mix for musical theatre and during a show I'm on the DCAs nearly 100% of the time, and use cues to change my DCA layouts as I move through the show. Currently in order to do this remotely with M32-Mix, I also have to have the M32-Edit laptop application running for cue control.

      Dan
      • February 4, 2016
    • ChaseMcKnight
      kettop

      I think you might like this app. This application can solve the problems you are having dowload here 

      • February 3, 2020
  • ChaseMcKnight
    Triber Contributor
    2016-02-18
    Dear all,

    We're pleased to announce our latest Offline Editor G3.2.6 for PRO1, PRO2, and PRO X.

    http://www.music-group.com/brand/c/Midas/downloads?active=Downloads

    Version G3.2.6 - Offline Editor

    Full Public Release for Offline Editor

    This document constitutes a formal release of Offline Editor software for full public usage. This build can be made fully available to the public.


    Addressed Issues:
    - Fixed GUI navigation issues on 13" Retina MacBook Pro
    - USB detection now works on El Capitan
    - Fixed Issues where text and file lists can display incorrectly when window resized

    Additional Information

    How to install the offline editor on OSX
    1. Copy the file below to an Apple Macintosh computer, double-click the file.
    2. Accept the license agreement then drag the Midas Offline Editor icon onto the “Drop here to install” icon.
    3. The program is then automatically installed and can be clicked to start it.


    Minimum Specifications (for application only)
    Apple Mac with OSX 10.7 (Lion) or above
    4GB RAM
    500MB HDD available


    Operational Considerations

    Please ensure you Mac settings are configured to allow third party applications to be installed

    How to install the offline editor on OSX:
    - Download the dmg file from the midasconsoles.com website to your Mac
    - Double click on the icon
    - Follow the on screen instructions
    read more...
    1 6,322
  • ChaseMcKnight
    Triber Contributor
    2016-04-18
    Dear all,

    We're pleased to announce that M32-Mix V 2.3.1 is now available for download.

    M32-Mix for MIDAS M32 Digital Mixing Console

    M32-MIX remote control and offline editing software provides comprehensive control over all mixing and routing functions of your MIDAS M32 consoles right from the convenience of your iPad®.

    From on-stage monitoring sound checks, preamp and channel processing control, to editing the console's onboard effects racks, the M32-MIX app allows the operator to control the M32 with unlimited flexibility and ease of use.

    M32-MIX gives you the freedom to move about the venue, in order to achieve the maximum performance of your system. Just connect the iPad to your wireless network and assign a static IP address to all consoles wired to that network. The M32-MIX app will connect to that IP address showing the type of console while connecting. No additional hardware, no computer and all extremely easy. M32-MIX unleashes an abundance of remote functionality for the MIDAS M32 series of digital mixing consoles.

    KEY FEATURES
    * Control over Input Levels, incl. Preamp Gain, Low Cut, Phase, Phantom Power
    * Configure the LCD Scribble Strips, incl. colors, icons and names
    * EQ-curve control for fine-tuning the equalisation from anywhere in the room
    * Real Time Analyser when editing EQ
    * Metering overviews with all levels at a glance
    * Individual input channel Sends to all buses
    * Sends on Faders feature for rapid stage monitoring setup from your iPad
    * Detailed editing of channel preamp, gate, dynamics, equaliser, bus sends and LCD scribble strips
    * Complete editing of M32 onboard effects rack
    * Scene management and control functions
    * Routing to Behringer ULTRANET P16 personal monitoring system
    * 6 aux, 2 USB recorder and 8 effects returns levels
    * 16 aux bus, 6 Matrix, Master LCR and 8 DCA levels
    * Mute lock-out feature prevents accidental muting
    * Connect multiple iPads® simultaneously

    REQUIREMENTS
    * Compatible with any iPad running iOS 6.0 or higher
    * Requires a wireless router connected to the M32
    * M32-Mix 2.3.1 requires M32 console firmware V2.14 or higher to be installed on the console

    What's New in Version 2.3.1

    - Fixes for mute issues
    read more...
    1 5,982
Go to page