Statistics

285,637 members
167,630 posts
  • KlausEff
    Contributor - Level 3
    2019-11-08

    I have the X32 Rack in use with the firmware version 3.11. Now I found the firmware version 3.12 for X32, dated with November, 8th 2019. The firmware 3.12 for X32 Rack is dated with July, 2nd 2018. Is that also the newest firmware, only with the wrong date?

    read more...
    0 176
    • KlausEff
      DaveMorrison

      @KlausEff 


      I think you are right. They changed some of the dates today. I noticed it when I was looking for firmware 4.0. I think it's release is immenent. M32-Edit 4.0 was released today.

      • November 8, 2019
  • Worzel
    Contributor - Level 1
    2019-11-14

    I have an original mXC Centre speaker for my cinema room set .18 years old and purée the. So much so I purchased a second hand one for another room set up. But it has a fault sound only comes from the tweeter and nothing from the two other speakers. The cabinate is perfect not been dropped and all connection posts are good. I tested on my original amp then put back my original speaker and that sounds great. So I know it’s not a cable or amp fault. Can anyone help please ideas 

    cheers

    read more...
    0 166
  • Monte
    Contributor - Level 1
    2020-05-29

    Bought this speaker on line thru Guitar Center. Scratch and dent. Can't find receipt. GC was no help. Amplifier quit working. Where should I send ? Just the amp or complete speaker. Will it be backed by warranty?

    0 165
    • Monte
      GaryHiggins

      @Monte 


      If you registered your speakers, seems it would be covered. Maybe not for the full 10 years being dent and scratch but it is possible. Either way, you need to create a CARE ticket. While signed in, click the "Support" tab up top of this page and follow the directions.

      • May 29, 2020
  • barksr
    Contributor - Level 1
    2019-12-25

    I've had a pair of Churchills (043A and 043B) for almost 20 years and have misplaced the manual. It doesn't show up on the list of downloads. Can anyone help me with a PDF copy? Thanks.

    0 163
  • Adriano1972
    Contributor - Level 1
    2019-11-18

    Hi, I've been using an Xr-18 for a few years now and have never had problems with the XAir app, but these days ago I updated IOS to version 13.2.2 and to my surprise was that the app is no longer working as it should. Can anyone help me regarding this? What should I do ? The latest app update is over 2 years old, will anyone solve this?

    read more...
    0 162
  • AudioEden
    Contributor - Level 1
    2020-04-29

    6 weeks ago i created a service ticket for a warranty replacement part for an $8000 pair of malfunctioning (4 day old) Tannoys, and all i got was INCOMPETENCE and DISREGARD. Then, just recently, Music Tribe closed my service ticket, labelling it "inactive customer".  Basically, they blame ME for not doing anything for me.

    HOW you like THAT !

    read more...
    0 162
    • AudioEden
      ChrisEdwards1

      Hi @arthurcth,


      Hope you are well. 


      I am sorry to hear about the issues you have encountered, if possible would you be able to send me a message with your case number and I can take a look into this for you?


      Christopher Edwards


      Customer Solutions Lifestyle Specialist.

      • April 28, 2020
    • AudioEden
      Jeffreyford

      Hello @aurthercth,
      It was great speaking with you yesterday.
      Thank you for your candor concerning your Prestige GR Stirling.

      • April 30, 2020
    • AudioEden
      clif

      Dont feel "special", I recently posted 5 service tickets and within days they were marked by the tribe as "resolved" .  In truth, after many weeks of begging and pleading with the so called Behringer support team (which had no relationship to Behringer at all I found out ), I did get a schematic diagram for the unit I was trying to get fixed.


      Bottom line, this Tribe thing is not all that its cracked up to be in my opinion.  I will probably come here as a last resort for future issues.

      • May 12, 2020
  • obiwan
    Contributor - Level 1
    2019-10-29

    Would buy the tannoy xt8f but the dealer said it is discontinued. What are the new modell?

    0 154
  • willc21577
    Contributor - Level 2
    2020-03-23

    Hi. I am setting up a 'home office' and have just dug out my MS16 speakers. Looks like I am missing the left right speaker connection cable. Does anyone know what cable it is and where I can get a spare?

    thanks

    Will

    0 152
    • willc21577
      RexBeckett

      @willc21577 


      Hello Will, welcome to the commnity.


       


      The connection betweeen the left and right speakers is light-duty speaker cable terminated with RCA plugs. I don't know a source for this type of cable but the MS16 is low power so a digital RCA cable like this should work. 


       


      If you are handy with a soldering iron it is not difficult to fit RCA plugs to 0.5mm2 speaker cable. There are also adapters like these which can be fitted without soldering.

      • March 22, 2020
    • willc21577
      willc21577

      Hi Rex


      Thanks for your reply. Looking at the back of the speakers, there is only one port. I have attached a photo. I think the one you suggested has two connections?


      Thanks


      Will8FF65F1E-D8A4-4F16-A4EF-4B798E78029D.jpeg

      • March 23, 2020
  • Ricktek
    Contributor - Level 1
    2020-04-18

    Just joined and so far this sucks. Bought a Behringer mixer after review of add showing software avaliable. Downloaded what I found and got was nothing more than public domain software. Audacity. This is not the software used in the web site demo. 

    Anyone have a clue whre I can get what was advertisedin web promo?

     

    This really sucks. Software should have come with product. Downloads require too much personal info. I did it and the download is NOT what was shown on demo.

     

     

    read more...
    1 149
    • Ricktek
      Paul_Vannatto


      @Ricktek wrote:


      Anyone have a clue whre I can get what was advertisedin web promo?





      That is an old video actually. The person in that video hasn't been with the company for at least 2 years. Many things have changed since then, including Tracktion (which he mentioned). It is now called Waveform which is available (version 7 is free) here. By the way, even the X32 and new Wing does not come with DAW software. Also, for the record, the Q802USB does not provide true multi-tracking signals. It only has stereo (2 track) bidirectional via USB.


       

      • April 18, 2020
    • Ricktek
      Ricktek

      Thanks for reply. Do you know if i can record stereo to pc using USB out on mixer? Would I be able to adjust audio going over USB with mixer or is it fixed at one setting? I am only looking to record a left and right channel.

      • April 19, 2020
  • Gletterle
    Contributor - Level 1
    2020-03-06

    Hi all,

    I know this has probably been addressed but I can't find exactly what I'm looking for, so here goes.

    M32R set as 32in/32out, DL16 connected. Everything feeds into Logic, I can hear live playing and hear playback of Logic Output (channels 1&2), I have these routed to last bank of inputs on Midas.  This is what I need:

    1) How can I record into Logic, post fader?  I want the EQs, Comp, Gate, effects... ect...   OR... Can I monitor with effects from the board while sending clean signal into Logic ?

    2) Playback- A) Best solution for multiple musicians hearing a multi-track recording session?  DP48?

     

    Any other solutions or help setting up the best routing is much appreciated.

     

    Thanks

    read more...
    0 148
    • Gletterle
      DaveMorrison


      @Gletterle wrote:

      1) How can I record into Logic, post fader?  I want the EQs, Comp, Gate, effects... ect...   OR... Can I monitor with effects from the board while sending clean signal into Logic ?



      You can do either.  Selecting Local in the Routing : Card tab only gives the direct out signal from the preamps. Switching those to a combination of Out 1-16, Ultranet, and Aux In, will enable you to define where the signal is tapped. If you use a mixbus (or two) for monitoring, you can select where in the channel the mixbus taps its signal.


       



      2) Playback- A) Best solution for multiple musicians hearing a multi-track recording session?  DP48?


       





      DP48 is a good solution. A lot of people will use pairs of Mixbusses for monitoring in conjunction with a tablet/phone app (MX-q, Mixingstation) for the musicians to build their own mix.


       


       

      • March 6, 2020
    • Gletterle
      GaryHiggins

      @Gletterle 


      Try using the Ultranet menu/Outputs 1-16 menu for the sources of card out 1-32. Set them up as direct outs of each ch. That way you can choose the tap point for each ch to your daw. Using "local" card outs takes the signal at or just past the preamp, basically flat. You can set the outputs of all the daw ch's to be stereo out 1+2 and use aux remap set for card 1-2. You can then monitor the daw tracks on aux 1 and 2 while hearing your live inputs 1-32 in their normal ch position. For daw playback, that will be the usual card 1-32 for the mixer inputs.

      • March 6, 2020
    • Gletterle
      DaveMorrison

      @Gletterle 


      Under Routing : Inputs , you could set the Record button (for basic tracking) to have 32 (or 24)  inputs as mic preamps and 0 (or 8) inputs as DAW playback and then set the Play button (for over dubbing) as 8 inputs as mic preamps and 24 inputs as DAW playback. It depends on your desired working style.


       

      • March 6, 2020
Go to page