Statistics

306,504 members
190,913 posts
  • New
    hythrain
    Newcomer - Level 1
    2022-10-04

    When I first bought my Q802USB, I had a different computer which had no issues with it which ran on Windows 10. Then about a year and a half ago, I bought a new computer that was also on Windows 10. I immediately began having an issue when it came to opening Sound Devices. If the Q802USB is plugged in, upon opening Sound Devices I will hear two device disconnects in quick succession. After a moment, there will be two device connects in quick succession. Another pause will occur before this all happens again. Sometimes it'll even happen a third time. Once it's done, I'm unable to do anything in Sound Devices until I unplug the Q802USB, where it will repeat the double disconnect/double connect process before I can manage sound devices.

    This issue also happens if I'm using any software such as OBS to record and I need to change the settings. In short, I'm unable to change any computer based settings because of this.

    As far as I know, I have up to date drivers and my OS is up to date. I'm unsure what is causing this issue.

    read more...
    0 7
  • New
    PastorMike21
    Newcomer - Level 1
    2021-12-21

    Hey guys, 

     

    Looking to connect my x32 to the Atem mini for livestreaming at church. Would anyone know how to do that? 

    0 7
  • New
    EddieLee
    Newcomer - Level 1
    2022-07-31

    Can the mp3 usb port be used to receive bluetooth playback if a bluetooth dongel is plugged into it?

    0 7
    • EddieLee
      KyleJohnson Hello, Kyle here with Music Tribe. Unfortunately no that will not work, the USB port is not designed for a Bluetooth receiver.
      • Jul 31
    • EddieLee
      EddieLee

      I had a feeling that was the answer, but... asked anyway! Thanks!

      • Jul 31
  • New
    Skyblue
    Newcomer - Level 1
    2022-06-21

    Hi I bought Flashback 2 Delay sometime ago. I have heard somewhere it's not for commercial use! I want to know is that true?

    Can I use my Flashback 2 Delay or other TC electronic pedals for live shows and commercial use?  Thanks!

    0 6
    • Skyblue
      ChrisEdwards1 Hi Skyblue, yes, it is ok to use your pedal and any other TC pedal for these purposes. There are many artists who use our products for these instances.
      Would it be possible to share the source of this information?
      • Jun 23
  • New
    baburaj64
    Newcomer - Level 1
    2022-10-03

    Hi this is baburaj Nair. I havea Behringer QX1202 USB audio mixer. I do Live singing on FB thru Iphone and the backing Trac from Mac book. I would like to know how to connet the Iphone for streaming and Macbook for Backing trac.

    I have tried all the i could . The vedio and vocal gets recoded with out the sound and backing trac

    I am not a technical savy guy .Can anyone from the tribe help to solver this in simple term

     

    baburaj Niar

    read more...
    0 5
  • New
    stxticgreen
    Newcomer - Level 1
    2022-07-07

    it says theres a pnp problem and i dont know what that means can someone please help.

    0 5
  • New
    shadygroveunitedbaptistchurch
    Newcomer - Level 1
    2022-04-11

    We have 2 of the speaker in our small church.  I'm getting reverb or an echo sound.  Can someone explain the A/B dials and how they work.  I've go them all the way down, but then I have to turn the volume wide open.  They are connected to a Allen Heath QU16 Mixer.

    Thanks for any suport you can provide.

    read more...
    0 4
  • New
    bamedia
    Newcomer - Level 1
    2022-11-15

    So i have a two x32s and a s32. s32 is on the stage, connected to FOH console via AES 50 A, there are 10 inputs connected to it. The othe inputs are connected to the local inputs of FOH console in sound booth. My issue is if I connect a broadcast console to the AES B port of the FOF to the AES A port of the broadcast console, I only get audio from the channels connected to the local port of the FOH console. In the FOH console local outputs are sent to the AES B port. ON the broadcast console all inputs are via AES A. Can anyone assist. Thanks

    read more...
    0 3
  • New
    gguevara1
    Newcomer - Level 1
    2022-10-03

    Hello,

    I really like the flexibility of the unit, to be used as an interface (for recording to DAWs) or as a small mixer (for live performances and streaming). Can you please consider these new enhancements/functionalities for the next firmware/app update. These requests are more from a small mixer perspective (enhancing the workflow on the fly for live performances). I have included screen shot illustrations that describe the high-level asks and requirements.

    1- For the channel settings screen, allow the user to switch between different channels. Eliminating the need to page-out of the screen and go back to the Mixer screen (in order to select a new channel).

    2- For the 4-Band EQ screen (when in Full Range mode), allow the user to also be able to type in a specific frequency (for quicker accurate selection of a frequency).

     

    3- For the Preferences screen, add the ability to SHOW EFFECTS & MONITORS FADERS (DCA) on the Mixer screen. These faders will display on the Mixer screen and control the levels of FX1/FX2 (linked), and MON1/MON2 (linked) in the overall mix.

     

    4- For the new EFFECTS & MONITOR FADERS (on the Mixer screen), allow the user to click inside these new faders to open up a new EFFECTS & MONITORS screen (for a quick view of the underlying FX1, FX2, MON1, MON2 levels). Also include MUTE buttons for all faders (for existing and new screens).

     

    5- Please add a similar "one-knob" gate, to compliment the one-knob compressor (at least on the first 2 mic channels)

    6- Add ability to setup a quick Mix-Minus would be great (I see many folks have requested Mix-Minus)

    Great product for what it is.

     

    Thanks,

    ggee

    read more...
    0 3
  • New
    EdgarMc
    Newcomer - Level 1
    2022-10-13

    My GoXLR has been a blessing for my stream audio, but I've recently encountered an error that's utterly confounding and cripples the entire thing. In short, the Stream Output seems to have stopped functioning entirely.

    Everything was working fine until one of the cables got slightly jostled, I heard a loud buzz and then nothing. To be clear, my signal chain is very basic, just my PC directly USBing into the GoXLR, and then its headphone jack into my speakers/headphones. No matter what I do, no matter whether I switch between default profiles, nothing seems to be coming out of the headphone jack.

    I have audio meters set up on the GoXLR itself so I can see that audio is being transmitted through it, but as far as I can tell, none is being put out. I thought this might be hardware issue and that the headphone jack might simply be broken, but to double check I did a few resets on the GoXLR, a few plug/unplugs, and even did a fresh install of the GoXLR app. When none of that worked, I booted up OBS, only to see that it was still receiving audio from the goXLR. It really seems to just be the headphone jack that's broken. Is there anything else I can do/try to troubleshoot this? Will I have to take it in for servicing? How much of this will be covered and will this be an easy fix? I'm eager to hear any and all information you have.

    read more...
    0 3
    • EdgarMc
      PedroRodrigues Hi EdgarMc, I would suggest to update the BIOS and the USB DRIVERS on your Motherboard first, when you concluded both updates and power cycle your PC, please confirm that your USB cable is in good condition and test a new cable. Please follow the guidance to set up your GOXLR accessible via the link below, please make sure all steps are followed. https://wsi.li/dl/jfsku5TMckb8C5Shh/ I hope this helps. Thank you
      • Oct 13
Go to page