Statistics

253,901 members
131,507 posts
  • Bugera
    Triber Moderator
    2020-07-17
    We’re bringing new features to the Bugera website to make it an even better experience! Visit https://www.bugera-amps.com today! #Bugera #NewWebsiteFeatures
    0 70
    • Bugera
      JL1103 I need some help selecting speakers for my BTX3600 and can't find anyone to ask. Can you help me ?
      • July 20, 2020
    • Bugera
      WilliamR Sure, what would you like to know?
      • July 24, 2020
  • lucastor4
    Newcomer - Level 1
    2020-08-13

    Hi, I´m from Brazil and I´m Electronic Engineer. I have a costumer with a Bugera 333XL Infinium which does not fit the BIAS to valve 2. I just change the tubes to new ones, two new quad sets (JJ and electroharmonix) but the led 2 of digital module turns on and the standby bulb light blinks. I have checked the grid voltages and to V1,V3 and V4 the voltage is -48V. To V2 the voltage is -25V but not stable, it changes between -25V and -24V. I have checked all cables, I removed the digital module and checked connections. I have changed the sockets of tubes but the problem persists. I have no ideia what do know, I suspect that infinium module is bad working. thank you for help.

    The ticket is: CAS-129532-V7J5J8

    read more...
    0 69
    • lucastor4
      Dale_M Hi lucastor4, sorry to hear of this issue, I will ask the USA team to look out for your ticket, it looks very much like a repair will be required.
      • August 14, 2020
  • EightGodzillas
    Newcomer - Level 1
    2020-08-10

    The portal won't let me send the request. It keeps saying to fill in the required fields and they are all filled in. I'd just like to call or email somoene at Bugera. Why can't I do that?

    0 68
  • New
    hotrats666
    Newcomer - Level 1
    2021-03-23

    Hello there.  I bought a used V5 Infinium and it works fine, except that I get serious microphonics everytime I use it.  We have replaced the tubes, even the sockets, but no luck.  My tech says that there has to be a bad solder joint, or connection somewhere.  Does anybody have any experience with this kind of problem?  Were you able to identify the cause? 

    It's a sweet little amp, but the noise is very noticeable.  

    Thanks! 

    read more...
    0 68
    • hotrats666
      WilliamR Hello, William with Music Tribe here. Sorry to hear you are having trouble with the amp, could you please submit the details of this to us through the Support link at the top of the page? First hit Support, then technical support.
      • Mar 25
  • JL1103
    Contributor - Level 1
    2020-07-20

    I'm looking to purchase 2 new cabinets for this amp. I always biamp so 1 cabinet to channel A and 1 cabinet to channel B through the crossover.  My question is what should be my Ohm rating per cabinet? 2 x 8 ohm cabinets or 2 x 4 ohm cabinets? And what should be the minimum wattage of each cabinet?

    Please help, as I only want to buy once and cry once!

    Joe

    read more...
    0 68
    • JL1103
      DaveMorrison Minimum impedance is 2Ω/channel. You could run a cabinet with two 4Ω drivers in each cab. You can safely run a cab with two 8Ω drivers; it just won't be as loud. If you run at full volume at 2Ω, you theoretically need a cab rated a 2000W.
      • July 20, 2020
    • JL1103
      JL1103 Thanks Dave!
      • July 21, 2020
    • JL1103
      JL1103 Thanks Dave
      • July 21, 2020
    • JL1103
      JL1103 Just for clarity, when Bugera states 2x1950w/2 ohms, In the owners manual, you divide the wattage by the number of cabinets? If this is correct, 2x1380/4 ohms would mean 2 x 8 ohm cabinets at 700 watts each should cover the amps out put?
      • July 21, 2020
    • JL1103
      DaveMorrison The manual is not so clear, probably because it's a muddy subject. Perception of power is tricky. If you have a 100W amp and want it twice as loud, you need 400W. Amps are also measured using sine waves from test instruments. Since the power output of your amp is dependent not only on the amp's gain, but also your input signal. The way you play affects the power you produce. Rating cabinets is difficult because of the unknown factors: how was the amp measured, and the "quality" of the input signal. A distorted signal (Fuzz and overdrive) has more "energy" than a clean signal.
      If you are a clean player and don't play a full volume, then 700W ought to be fine. You could probably use a vintage Fender Bassman. If you push it to the max, you could "toast" nearly anything.
      • July 21, 2020
  • New
    JustinV
    Newcomer - Level 1
    2021-03-05

    Hello.  I have attempted to replace the OEM speaker with an Eminence 820H.  It was easy enough to do, but the power going to the speaker seems much less than before.  I'm not sure what I might have done to cause this problem.  I originally tried the solderless connection using the original wire.  Then, I clipped those off and soldered it.  Same result.  The power is very low - almost non-existent at 0.1W.  At 5W, gain up and volume up, there is signal going to the speaker for sure, but it's not nearly as loud as it used to be.  

    The amp is only a few months old, and it hasn't been used a ton.  So, I'd be surprised if it's an issue with the tubes.

    Any suggestions on how to attack this problem?

    read more...
    0 67
    • JustinV
      Dale_M Hi JustinV are you able to give us the spec of the Eminence 820H so we can check against our specs please?
      • Mar 11
  • New
    Nzumeus
    Newcomer - Level 1
    2021-05-31

    I have been trying to register my new Bugera amp without success. 
    Can someone help?

    0 67
    • Nzumeus
      ChrisEdwards1 Hi Nzumeus, I am sorry to hear about your experience. Could you please provide some additional information on the issues you have encountered trying to register the product?
      • May 30
  • New
    JoeRojas
    Newcomer - Level 2
    2021-04-10

    I don't know if it's me or is this actually happening. I've noticed that few suppliers carrying Bugera products are phasing them out. I live here in the USA, I finally got my stimulus check and was interested in getting the 212TS cabinet. Right now, I only can them on the used market but like they're like becoming rare. Sites like Sweetwater don't even have them anymore. I would like to compliment my G5 head with it, but can't find even a new one in stock. Can anyone at Bugera let me know what is the status and if Bugera instill going to be around? Thanks. 

    read more...
    0 66
    • JoeRojas
      Dale_M Hi No Bugera is not phasing out there is currently a lot restructuring in the world of sales added to Covid 19 which halted a lot of production of certain lines so this is most likely what is causing the delay.
      • Apr 12
  • daviddl79
    Newcomer - Level 1
    2020-06-30
    anyone know the amperage for the f4 and f3 fuses (internal fuses)
    0 65
  • New
    JuezDredd
    Newcomer - Level 1
    2021-04-11

    Hi. I am looking for a FSB104 pedal for a Bugera 333 Infinium.

    I can't find it anywhere. I am from Spain. Could someone tell me where to get it?

    read more...
    0 65
Go to page