Statistics

284,883 members
166,734 posts
  • AlexNL
    Contributor - Level 1
    2020-07-07
    Hi, Anyone using the DN735 solid state recorder. I can buy one but i am curious if it can operate without a timecode, just as a simple sample? Plz let me know. regards, Alex
    0 166
    • AlexNL
      Nigel67 Hi Alex, I am unable to get on to our server at the moment to access the operators manual. As soon as I can(hopefully in the morning) I will get an answer to you.
      • July 8, 2020
  • New
    trentperkins
    Newcomer - Level 2
    2020-11-06

    There are several projects I am planning to use the DM8000 or DM8500 for, but trying to find pragramming information is extremely challenging.  Before I spend that much money, I would like to have an idea that it will work and do what I want it to do.  I found the DM8000 manual which was helpful, and the Designer software has some limited help built in, but I have no idea how KONTROL interfaces with designer or how to program/use the touch screen on the DM TCE

    Thanks in advance for your help!

    read more...
    0 165
    • trentperkins
      DavidKnighton Hello Trent Perkins,
      We actually have several webinar recordings on the DM series. I'll see about getting you access to these videos. They will eventually be hosted here in the Community.
      • November 6, 2020
      • Are there any Tutorials on the DM8500 and how to use DM KONTROL to program DM TCE?
        trentperkins That would be wonderful! Thanks!
        • November 6, 2020
      • Are there any Tutorials on the DM8500 and how to use DM KONTROL to program DM TCE?
        SHERIFFMARCOS hi, where are the videos? thx
        • Feb 25
  • tommypenngotti
    Contributor - Level 2
    2019-12-26

    Hello - I just purchased a Klark Teknik DN350 EQ that looks to be from the middle 80s where the 120V fuse holder(plug) is missing and there is just a hole on the back board ...there are fuses on the inside under hood. The seller is claiming just the "plug blank" is missing... although it does possibly look modified?? Any help on this appreciated . Thanks 

    read more...
    0 159
  • GregWarren
    Contributor - Level 3
    2020-03-25

    This is my set up and I wanting to record the 32 channels. I can see the sounds off the board going into logic, but when I record them it sounds like a alien trying to communicate with me. 

    0 158
    • GregWarren
      DaveMorrison

      @GregWarren 


      It sounds like you have a sample rate mismatch. Set both Logic and the DN9630 (and the mixer) to 48 kHz.

      • March 25, 2020
    • GregWarren
      GregWarren

      Thanks for replying...It all is...switch on 48K on DN9630...midas is set to 48k and so is logic...I've checked multiple times

      • March 25, 2020
    • GregWarren
      DaveMorrison

      @GregWarren 


      My first thought of alien communication was a samples played at the wrong rate. You are getting some sort of signal from the DN9630 though? Hmm... 

      • March 25, 2020
  • New
    peterashley
    Newcomer - Level 1
    2020-12-14

    Hi has anyone tested a dm8000 with a barco clickshare cx50?

     

    0 156
    • peterashley
      PedroRodrigues Hi Peter, please be aware that we advise the implementation of the DM8000 must be done via the physical connections available on the unit. Effectively we have never tested the unit with that wireless solution but we do not advise any other implementation other than the one present on the manual for this unit. Thank you
      • January 13, 2021
  • New
    GaryCMarston
    Newcomer - Level 1
    2020-12-29

    Please help or provide a help number for klark technik.

    0 153
  • New
    Adamrussell
    Newcomer - Level 1
    2021-06-30

    We are trying to multitrack record to Logic Pro X Via the DN9630 from a Midas Pro1. Everything is configured and patched on the Pro1 and the status on the Pro1 says it is connected and AES50 Sync is OK. The DN9630 is flashing green and orange above the ethercon jack. On the computer side, the iMac and Logic see the DN9630 and let me select it as the audio interface, but when I arm the tracks, there is no signal (yes the direct out is not muted). Help!

     

    read more...
    0 149
    • Adamrussell
      DavidKnighton Hello Adamrussell,
      On the DN9630 there is a switch for 48KHz or 96KHz operation. Do you currently have it selected as 48KHz? This would be incorrect if so. Midas Pro1 operates at a fixed 96KHz sample rate. Some users make the mistake of selecting 48KHz thinking it will automatically sample down/up to the computer, but this is not true. You make the selection based on the console sample frequency.
      • June 30, 2021
      • Klark Teknik DN9630 Via Midas Pro1
        Adamrussell Sorry, I responded last week and it looks like it didn't actually post. The sample rate is on 96KHz to match the Pro1.
        • July 6, 2021
  • New
    MichaelHolmlund
    Contributor - Level 1
    2020-11-12

    I bought a new Mac and installed Logic X. Now I can't record music from my m32R. My old solution (logic 9 and m32r) was working perfect. Where have I gone wrong? 

    0 149
  • New
    AudioForge
    Newcomer - Level 1
    2021-01-13

    Hi KT team, I've followed a previous post from before Xmas and contacted suppliers re availability of a pair of 2As in a bundle I need.

    Thomann replied with "sold out and not expecting any more". Please can you advise if 2A has been discontinued, I'm ready to order a pair of 2As, a pair of 76s and a dimension.

    richy

    read more...
    0 146
    • AudioForge
      PedroRodrigues Hi Audioforge, please be aware that I can confirm that the units are not discontinued, in regard of availability I would advise you to contact another reseller to request that information about these product as we do not have access to information of third party company that distribute our products. Thank you
      • January 14, 2021
      • KT2A / 2AKT
        AudioForge Great news, thank you
        • 1
        • ·
        • January 14, 2021
  • hoangbaokhoa
    Contributor - Level 2
    2020-10-14

    Hi Folks,

    Would you please advise if we can insert the Klark Teknik DN 32 USB to Midas Pro 3 for multitrack recording?

    Which software you prefer in this case?

    Many thanks!

    0 145
    • hoangbaokhoa
      john0121 Hi Diem, the DN32USB is only compatible with M and X series consoles not Pro Series. You should take a look at the DN9630 if you want to record from Pro 3 to computer via USB.
      • October 14, 2020
      • Dn 32 USB & Midas pro 3
        hoangbaokhoa Many thanks John
        • October 15, 2020
    • hoangbaokhoa
      jbsounds Just got one of these and looking forward to putting it to use with our Pro2.
      • November 13, 2020
Go to page