Statistics

254,618 members
132,321 posts
  • New
    DamienKyle
    Newcomer - Level 1
    2020-12-04

    Hi

    +48 working on input channels when local inputs selected but surface +48 button won't light on channels up when AES inputs routed to channels. 
    feature or problem? 
    thanks. 

    0 53
    • DamienKyle
      DavidKnighton Hello Damian Kyle,
      Where are you getting your AES50 inputs from? Are they coming from a stagebox or another console? Check under SETUP>PREAMPS there is an option to LOCK STAGEBOX. Make sure that option is unchecked. Also, the console can not controls preamps coming from another console directly. You have to use the HA REMOTE feature and set the levels/+48 on the PREAMPS page.
      • December 4, 2020
    • DamienKyle
      Paul_Vannatto Check on the Setup, preamps screen that the particular AES50 input has phantom enabled. Also check the channel source that it is indeed assigned to the particular AES50 input.
      • December 4, 2020
    • DamienKyle
      DamienKyle Thanks, guys. The channels are properly assigned to AES50A. The +48 surface button works fine when the DL32 is actually attached and also when the channels are set to local inputs. No other console involved. The stage box lock is unticked. Just wondering if surface +48 don't work when channels are assigned to AES50?
      • December 4, 2020
    • DamienKyle
      DamienKyle ...and the stage box isn't connected.
      • December 4, 2020
      • M32R Live +48
        Paul_Vannatto That would be correct, Damien. It is because the console is actually controlling the preamps (gain, phantom) remotely, since those preamps are an integral part of the XLR inputs of the DL32. If the DL32 is not connected, there is no way of controlling those preamps.
        • December 4, 2020
    • DamienKyle
      DamienKyle Thanks, Paul.
      That’s what I thought. It’s just a bit of a workaround if you want to programme scenes at home with no stagebox connected.
      You can actually turn the +48 on in the preamps page, so no real biggie. The offline editor is a bit of a pain in the ass. If it looked a bit like the routing page, etc. it’d be much better.
      • December 4, 2020
  • keeganmccarthy
    Newcomer - Level 1
    2020-07-09
    Hello all, I just got a DP48 which I am super excited to use! I did have a question about the compression settings. From what I can tell the only control over the amount of compression is a percentage. Is there a way to see and change the more in depth settings of the compressor, such as knee and ratio?
    read more...
    0 53
    • keeganmccarthy
      Paul_Vannatto The percentage of compression is the only control available. All other settings are fixed internally.
      • July 9, 2020
  • New
    Gordimus
    Newcomer - Level 2
    2021-05-27

    I am trying to use my M32 for FOH and going to DL32 Port A and Port B of DL32 to Port A on X32 for monitors. I can't get local outputs to work on the X32. 

    0 53
    • Gordimus
      Paul_Vannatto If you mean by "local outputs" as the XLR outputs on the back of the X32, you would assign those (in banks of 4) on the Routing, XLR Out screen.
      • May 27
    • Gordimus
      Gordimus

      Thanks. I think I tried that already but I will retry today.

      • May 27
    • Gordimus
      Paul_Vannatto What did you assign to those banks of 4?
      • May 27
    • Gordimus
      Gordimus

      I don’t have the console in front of me. Can you tell me how I should assign them to outputs on back of X32!

      • May 27
    • Gordimus
      Paul_Vannatto Typically the individual outputs are assigned on the Routing, Outputs 1-16, such as the buses 1-8, etc. Then those banks of 4 are assigned to the XLR Out (eg. Outputs 1-4 -> Out 1-4, Outputs 5-8 -> Out 5-8, etc.)
      • May 27
  • New
    reggie1024
    Newcomer - Level 1
    2021-01-27

    Hey,

    My m32 console is under warranty but everytime i fill out the form on here it never loads. I only get the spinning wheel in the middle of the screen. Has anyone else experienced this or is there any other way i could get this done?

    Thank you

    read more...
    0 52
    • reggie1024
      KyleJohnson Hi Reggie, Kyle here with Music Tribe. I'd try clearing your cache and cookies, and try a different web browser if you can.
      • Jan 27
  • New
    andyp13
    Contributor - Level 3
    2021-03-09

    Hi all, I use a X32 Rack, though I intend to keep it I’m thinking of purchasing an M32C - to save on Rack Space (I have 2 S16’s). Does anyone know if the X-Live card fits the Midas 32C.

    please email me your reply as I will never find this post ever again on here, or it will run so slow it just gives up. Email address below

    Thanks

    [email protected]

    read more...
    0 52
    • andyp13
      Paul_Vannatto Yes it will
      • Mar 9
    • andyp13
      Dale_M Any of the cards will fit the M32C, The M32/R/Live/C are all the same platform regardless of the form they are presented in. You must however ensure you use the correct driver software for that card.
      • Mar 9
  • JoëlLeBail
    Newcomer - Level 1
    2020-08-28

    hello, do you think there will be in the future an update of the MR18 that would integrate the delay on each channel?

    0 52
    • JoëlLeBail
      john0121 Hi Joël, We don't have a date for the next M Air firmware update at the moment but I can pass your request on to the development team for consideration.
      • August 28, 2020
    • JoëlLeBail
      JoëlLeBail Hi, thanks you, yes you can pass my request!!
      • September 3, 2020
  • New
    knaepp
    Newcomer - Level 1
    2021-06-02

    To whom it may concern,

    we are currently working in three different environments. First rehearsalroom has an x32 Producer with two S16 connected, second environment is our studio with M32R and two DL16 connected and a third environment with a M32C (pretty new) and one or two DL16 connected for smaller events or accoustic sets. We use cues, scenes and snippets widely to control the key settings of our Mixers and the effects used during a gig.

    Now I recognized that it is a problem to name the cues on our M32c. Each time when we load a cue-sheet from usb-drive and do some modifications using M32-Edit Software (macOS) the Name of the cue will be automatically adjusted to

     

    M32C_YYYY-MM-DD_HHhmm.nnn.<snc|snp|shw>

     

    The internal name of the cue will be changed to M32C even when we change the name using M32-Edit. Our name will allways be ovwerwritten during the next export of the show.

    Naming of the show is important to us because we document our adustments and create shownames containing serial numbers to  be able to fall back to older "releases" of our cofiguration if necessary. Each time when using M32C we have to do this manually. This means renaming all files and adusting the internal name of the show using

    sed -i 's/M32C/<nameOftheShow>-<serialNumber>/g' <nameOfTheshowfile>.shw

    Do you know any workarounds for this - let me call it a feature?

    Best regards

    Matthias

    read more...
    0 52
    • knaepp
      Paul_Vannatto Hi Matthias, before exporting the show from the M32C (or any M32/X32 for that matter), make sure to name the show (bottom right corner of the Cues screen in M32-Edit). If that is left blank, then the console will use a generic filename (and show name in the first line of the .shw file).

      As an alternative, have you tried the Show Manager app that I have developed?
      https://sourceforge.net/projects/m32x32showmanager/
      It provides an alternative GUI to create and modify shows.
      • Jun 2
    • knaepp
      knaepp Hi Paul,

      thank you for your answer. That was the way we already tried it. We set the name of the show in the bottom right corner. The export the usb stick is only possible on the M32C edit using the "one knob". After choosing "Export Show" the name of the show will be M32C...something -like I told you before. There is no option to do this via M32-Edit. The name of the showfile will always be adusted and the name of the show is M32c.
      I know your showmanager, thank you for sharing it. Most members of our band are not familar with tools like this (some of them even do not really understand the show-concept).
      My expectation is that a stored name would not be adjusted by the console.

      BTW: we use firmware 4.06 and M32-Eit 4.3
      Best regards

      Matthias
      • Jun 2
    • knaepp
      Paul_Vannatto Thanks Matthias for your response. Until just recently, the M32C and X32 Core had issues exporting anything and that was fixed as part of one of the firmware updates. Evidently this is a bug. I will pass it on to the developers. In the meantime I would suggest you make the necessary changes using the M32C and export the affected scenes and/or snippets (either using the Export to USB stick) or using the dual nature of M32-Edit, then merge these scenes/snippets into the current show using either M32-Edit or Show Manager.
      • Jun 2
    • knaepp
      knaepp Hi Paul,
      I just checked again showmanager. May be we have a misunderstanding. We do not use the showfile from usb-stick, we always import the entire show to our consoles. Changes from one scene/show/snippet to the next will be done using midi. Because of that all changes will be done affecting the scenes and snippet files on the console.
      After finishing a gig or rehearsal we - again -export the show to the usb stick. This export destroys the name of the show and the name of all files - even when we set the show-name using M32-Edit.

      I hope this was not too confusing.

      Greets
      Matthias
      • Jun 2
    • knaepp
      knaepp

      Hey Paul,
      thank you. Until we see an upcoming future update we will use the current way (rename files and change showname using sed)

      Thanks for your help and stay all healthy

      Matthias

      • Jun 2
  • New
    Regie
    Newcomer - Level 1
    2021-01-27

    Hello, 

    I was wondering if it's possible to connect to my DL251 and my Midas Heritage D(96K mode), the all 48 input and the 16 outputs simultaneous ? 
    If it's not possible, can program my DL 251 to have 8 outputs and 40 inputs ? If's possible, how can I do that ? 
    Thanks 


    read more...
    0 51
    • Regie
      DavidKnighton Hello Regie,
      You should be able to connect the DL251 to an HD96 just fine, with full channel count. You would need 2 lines of AES50 in total.
      • Jan 27
      • Midas DL251 - Routing and patching
        Regie Hello DavidKnighton, thanks for your answer.
        • Jan 28
  • New
    MadsHyldahl
    Newcomer - Level 1
    2021-07-24

    Im trying to test some midi commands for muting mute groups over midi. As i dont have the M32 at home i'm trying to test everything in the edit software. But i cant get m32 edit to responde to anything.

     

    im following this sheet

    https://community.musictribe.com/pages/kba?articleId=b675dad0-fb77-ea11-a811-000d3ac693d8&brand=Midas

     

    i'm sending from ableton live to "network session" cc80 on channel 2 to turne ON/OFF mute group 1, but it does not work.

    i have also tried with a midi foot controller, but m32 edit i not responding to anything.

     

    so does midi only work if i have the console ? 

     

     

    read more...
    0 51
    • MadsHyldahl
      Paul_Vannatto The M32-Edit is a client app that requires the OSC server that is built into the M32. Midi commands received by the M32 is converted to the OSC equivalent and changes the appropriate setting. When that happens, the M32 senses the changes and adjusts its screens accordingly. Therefore you need an M32 or X32 connected to both the M32-Edit and the computer (with Ableton).
      • Jul 24
  • New
    soundot
    Newcomer - Level 1
    2021-03-02

    on the M32 what needs to be done to keep the L&R and MC master faders from resetting when the power is cycled off and on?

    0 51
    • soundot
      Paul_Vannatto On the console, Setup, config, General Prefs, Safe Main lvls. In M32-Edit, Setup, Mixer, General Prefs, Safe Main Levels.
      • Mar 2
Go to page