Statistics

249,418 members
126,423 posts
  • New
    Ahltech
    Newcomer - Level 1
    2021-06-05

    I've done this over 100 x. 

    cat 5 shield cable 75'. Tests fine 

     

    tried 2 other cables. 

    on routing dl1-16 shows up. 

    On mixer solid red light on screen. Blink red light on dl-16

     

    tried several cables....and A& B side.... same results 

    read more...
    0 40
    • Ahltech
      Paul_Vannatto Make sure the AES50 cable is connected to the A port of the DL16.
      • Jun 5
    • Ahltech
      Ahltech

      It is on the a side

      • Jun 5
    • Ahltech
      Ahltech

      It is on the a side

      • Jun 5
    • Ahltech
      Paul_Vannatto What mode is the DL16 set to? If the SN Master light is lit, that means that it is set to be the master clock along with the M32. Change the mode so that only the M32 is the master clock.
      • Jun 5
  • New
    Ossianott87
    Newcomer - Level 1
    2021-05-03

    Hello, I'm using:


    BUS 1/2
    BUS 3/4
    BUS 5/6
    L/R

    For individual headphone mixes routed to individual headphone amplifiers for studio work. I would also like to use the built in headphone amp of the MR18 but have not found out a way to tap audio from anything else (for example the returns) than the Busses or the master for another individual headphone mix. I'm trying to figure out if this is possible. Any suggestions? I've tried to look in the manual but it's not very elaborate in this context.

    Thanks!

    read more...
    0 39
  • New
    Unkle1
    Contributor - Level 2
    2021-07-25

    I am having issues with my auxes 3-16 coming on after I set up the board mix 1 and 2 come on with no issues ,this is the pro 1 console any help will be truly appreciated thanks.

    0 39
    • Unkle1
      DavidKnighton Hell Unkle1,
      Not sure I understand your meaning. Do you mean the auxes are not unmuting? Or you're unable to turn the auxes ON for each individual channel? I don't suppose you submitted a support inquiry for this have you? If so, may I have the case number?
      • Jul 26
    • Unkle1
      Unkle1

      To make things a little clearer,my auxes 3-16 do not come on from when I patch them in from the back of console,I do not use a Stagebox, previous owner used Stageboxes, so I was informed to try resetting to default settings ( case# 474216-T9P4V )thanks,

      • Jul 26
  • New
    JosephK
    Contributor - Level 1
    2021-03-17

    Hello,

     

    I saw a few discussions describing the same issue I have, but I have not found a solution yet.

    I have Windows 10 and Mac (upon my knowledge, DL32 only allows Windows OS to update the firmware).

    I tried to connect DL32 with win 10 laptop, powered on the DL32, and laptop notices the cable connection because it makes the noise/notification sound when there's a connection.

    So, I ran the program, but as soon as it launched it quitted automatically. (When I first launched it, it warned me that the file may not have been downloaded correctly and asks me what to do - I said it is downloaded correctly)

    Does anyone know the solution for this using Windows 10 OS?

    I saw someone said it may have been updated, but is there a way to check the firmware?

     

    Thank you.

    read more...
    0 39
  • RoelCanales
    Newcomer - Level 1
    2020-07-07
    Tried to up date but when I load my usb showed nothing
    0 39
    • RoelCanales
      Paul_Vannatto Is your USB formatted to FAT32 and the firmware file extracted from the zip file?
      • July 7, 2020
    • RoelCanales
      Nigel67 Hi RoelCanales, you haven't mentioned which midas console you are trying to update. if it is a PRO Series then the software needs to go into a particular folder. Let me know the console type and I will be able to help you further.
      • July 8, 2020
  • New
    BenjaminChan
    Newcomer - Level 1
    2020-11-24

    Hi,

     

    I'm using Midas M32R and I'm trying to route Bus7/8 to Dante input 15/16. All my other channels are working fine 1-12 into Dante 1-12. I can't seem to find the bus routing in M32R to route it to dante input. Anyone has any idea? Thanks

     

    Ben

    read more...
    0 39
  • rrbarcarse
    Newcomer - Level 1
    2020-07-03
    I looked into M32 website (Midasconsole.com) and don't see M32 Edi app for windows. I see Mac and Linux. I went under App, but when I downloaded the file it has tar.gz file extension. Any help would be appreciated. Thanks!
    0 39
    • rrbarcarse
      Paul_Vannatto That software list is scrollable. The PC (Windows) version is just below the Mac version.
      • July 3, 2020
    • rrbarcarse
      rrbarcarse Oh wow! I feel so !#$%. Thanks. I also found it on the downloads section and filtering to M32 section. Appreciate the support! thanks!
      • July 3, 2020
  • liamphan
    Newcomer - Level 1
    2020-08-07

    Does anyone know how to route Midas 32R to operate an Audio Interface? I need help. I use Mac OSX Catalina. Thank You

    0 39
    • liamphan
      DaveMorrison Yes. It works very well with Catalina. What do you need help with? Routing is common issue as well as the "System Preference: Security and Privacy: Privacy tab : allow Microphone" for the audio software on your Mac.
      • August 6, 2020
      • Using Midas 32r same Audio Interface
        liamphan How about route in/out, i pick DN32 in Tab Sound but the sound does not come up
        • August 6, 2020
      • Using Midas 32r same Audio Interface
        DaveMorrison Routing is the hardest thing to understand on these mixers. The" Routing : Card" tab is where signal is sent to USB (which will then go to your computer). By default, the Mixer's preamps are sent. If you want busses, or taps from the preamps, a little voodoo (understanding) is required. It's not hard. I just find some of the labels and descriptions are backward (to my way of thinking).
        What signals to you want to send from the mixer the computer? Returns from the computer are pretty simple—The "Routing : Input" tab has the controls. Feel free to ask specific questions, share your current scene file (dropbox, et. al.), of even post a picture.
        • August 7, 2020
    • liamphan
      john0121 Hi Liamphan, what DAW are you recording with?

      You might need to enable access in security as shown here:

      https://musictribecommunity.powerappsportals.com/en-us/knowledgebase/article/KA-01592
      • August 7, 2020
      • Using Midas 32r same Audio Interface
        liamphan I am using Protools for recording
        • October 24, 2020
  • New
    Pauldouglas68
    Newcomer - Level 1
    2021-06-19

    Hi need help can’t find app for mr18 edit app for Samsung tablet

    0 38
    • Pauldouglas68
      Paul_Vannatto Search for Mixing Station and get the X-Air version. The Pro version is well worth the small cost IMO.
      • Jun 19
  • DwayneAasberg
    Super Contributor - Level 1
    2020-08-22

    Hello all.

    Is it possible to link two faders together without common EQ-dynamics?  For clarity, I want two faders to move together but I need the two channels to retain their unique HA settings, EQ and dynamics.

    Thx in advance for any help you can offer.
    Dwayne A

    read more...
    0 38
Go to page