Statistics

251,052 members
128,282 posts
  • RoelCanales
    Newcomer - Level 1
    2020-07-07
    Tried to up date but when I load my usb showed nothing
    0 39
    • RoelCanales
      Paul_Vannatto Is your USB formatted to FAT32 and the firmware file extracted from the zip file?
      • July 7, 2020
    • RoelCanales
      Nigel67 Hi RoelCanales, you haven't mentioned which midas console you are trying to update. if it is a PRO Series then the software needs to go into a particular folder. Let me know the console type and I will be able to help you further.
      • July 8, 2020
  • rrbarcarse
    Newcomer - Level 1
    2020-07-03
    I looked into M32 website (Midasconsole.com) and don't see M32 Edi app for windows. I see Mac and Linux. I went under App, but when I downloaded the file it has tar.gz file extension. Any help would be appreciated. Thanks!
    0 39
    • rrbarcarse
      Paul_Vannatto That software list is scrollable. The PC (Windows) version is just below the Mac version.
      • July 3, 2020
    • rrbarcarse
      rrbarcarse Oh wow! I feel so !#$%. Thanks. I also found it on the downloads section and filtering to M32 section. Appreciate the support! thanks!
      • July 3, 2020
  • liamphan
    Newcomer - Level 1
    2020-08-07

    Does anyone know how to route Midas 32R to operate an Audio Interface? I need help. I use Mac OSX Catalina. Thank You

    0 39
    • liamphan
      DaveMorrison Yes. It works very well with Catalina. What do you need help with? Routing is common issue as well as the "System Preference: Security and Privacy: Privacy tab : allow Microphone" for the audio software on your Mac.
      • August 6, 2020
      • Using Midas 32r same Audio Interface
        liamphan How about route in/out, i pick DN32 in Tab Sound but the sound does not come up
        • August 6, 2020
      • Using Midas 32r same Audio Interface
        DaveMorrison Routing is the hardest thing to understand on these mixers. The" Routing : Card" tab is where signal is sent to USB (which will then go to your computer). By default, the Mixer's preamps are sent. If you want busses, or taps from the preamps, a little voodoo (understanding) is required. It's not hard. I just find some of the labels and descriptions are backward (to my way of thinking).
        What signals to you want to send from the mixer the computer? Returns from the computer are pretty simple—The "Routing : Input" tab has the controls. Feel free to ask specific questions, share your current scene file (dropbox, et. al.), of even post a picture.
        • August 7, 2020
    • liamphan
      john0121 Hi Liamphan, what DAW are you recording with?

      You might need to enable access in security as shown here:

      https://musictribecommunity.powerappsportals.com/en-us/knowledgebase/article/KA-01592
      • August 7, 2020
      • Using Midas 32r same Audio Interface
        liamphan I am using Protools for recording
        • October 24, 2020
  • New
    TwinTurboz
    Newcomer - Level 1
    2021-07-08

    Ive been using bus sends for musician monitoring while recording which works fine.  But it ties up many sends.  I finally picked up a Midas DP48 to play with.  My question is,  How do I send individual DAW tracks to the Midas DP48.  I want to record bands, but use my "go to" vst plugin effects and send that wet signal to the DP48 for musician monitoring.  Would I utilize the User Ins/Outs ?  Just choose "User In" and select "Card 1-32" ?  Will that send those DAW channels to the DP48 ?

    read more...
    0 38
    • TwinTurboz
      Paul_Vannatto The DP48 gets its signals from the AES50 (A or B) feed. So whatever you want to send to the DP48 needs to be done on the Routing, AES50 screen. If for example, you have the DP48 connected to the AES50 B port of the M32, assign the Card banks to whatever you want to send to the DP48 on the Routing, AES50 screen (AES50 B1-8 to 41-48)
      • Jul 7
    • TwinTurboz
      TwinTurboz

      Thanks Paul. On another scenario. Say I wanted to utilize the Midas onboard "Gate" on each channel being fed to the musicians. Can I set the tap points on the DP48 to be "post effects" but pre fader ? Sorry if the questions seem stupid, but Im slowly learning how to utilize the Midas. Im probably over thinking everything. I have six musician feeds set through stereo bus sends (I posted on that a year or so ago and you helped). But like the idea of freeing up those busses. But want to tap each channel going to the Midas DP48 either at the DAW channel out or tap after the Midas onboard channel effects. Thanks

      • Jul 8
    • TwinTurboz
      TwinTurboz

      Forgot to add. Everything I have read point that AES50 tap the signal before onboard effects (at the preamp) Am I wrong ?

      • Jul 8
  • DwayneAasberg
    Super Contributor - Level 1
    2020-08-22

    Hello all.

    Is it possible to link two faders together without common EQ-dynamics?  For clarity, I want two faders to move together but I need the two channels to retain their unique HA settings, EQ and dynamics.

    Thx in advance for any help you can offer.
    Dwayne A

    read more...
    0 38
  • New
    PMBCTechCrew
    Newcomer - Level 1
    2020-12-06

    We are working on a show for our church. There is 1 scene, 15 snippets and 31 cues. The snippets simply mute and unmute channels depending on what is happening on the stage. This is not a complicated show

    We can create all of the snippets and save them. We can also create all of the cues and assign the appropriate snippets. We go through the save process and export a copy to a flash drive. Everything works fine until the computer is shut down and we reload the show.

    Upon reloading the show, the snippets are all off by one, on both the MIDAS board and the M32 Edit software. So Snippet 0 which was "Mute All" is now "Unmute All" (which was originally Snippet 1). Snippet 0 now displays as "Unmute All", as does Snippet 1. However, Snippet 1 is actually "House Audio". Each snippet is off by 1, even though the title is correct. The original Snippet 0, "Mute All" is gone.

    I originally started setting up Snippets with Snippet 0. When the loading issue began, I tried starting at Snippet 1, leaving Snippet 0 empty. Now everything is 2 off.

    I am at a loss of what to do. The last time I used the Show Control was last year and had no issues. We have done the firmware updates, and now I am experiencing this. Any guidance is greatly appreciated.

    read more...
    0 38
    • PMBCTechCrew
      Paul_Vannatto Hi Bob, what firmware version are you using? This was fixed in the latest update (4.04).
      • December 6, 2020
    • PMBCTechCrew
      PMBCTechCrew I'll check this afternoon. I believe it is 4.02 (so it looks like I missed one).
      • December 7, 2020
      • MIDAS: Snippets Not Loading Properly
        Paul_Vannatto 4.04 was released last week. Make sure you also update the M32-Edit app as well.
        • December 7, 2020
    • PMBCTechCrew
      PMBCTechCrew Many thanks for the quick reply
      • December 7, 2020
  • New
    JudeLeBlanc
    Contributor - Level 2
    2021-02-17

    I've got an M32 LIVE console on order (retailer was out). I understand that the ditribution model has recently changed. Just curious as to when I may expect to be receiving this console? Thanks

    0 37
    • JudeLeBlanc
      DavidKnighton Hello JudeLeBlanc,
      This product falls under the RETAIL category, which is now distributed by our super partner Sweetwater in US and Thomann in EU. Depending on your country, you may have a different distributor, but I would presume you're speaking about the US distribution change. For further information, please contact Sweetwater.
      • Feb 17
  • timweed
    Newcomer - Level 2
    2020-07-22

    I have a new MR18 and only get signal to the headphone out when the main is soloed.

    I've checked all routing options but see no references to the hf out anywhere.

    Grateful for any suggestions, Tim

    0 37
    • timweed
      RexBeckett Check the settings on MAir Edit Setup -> Monitor. The screenshot shows typical settings. Also check the Main LR fader is turned up. The Setup -> Audio/Midi -> Safe Main Levels option, if on, will set the Main LR fader right down on power-up.
      • July 22, 2020
    • timweed
      RexBeckett The In/Out -> Main Out tab also affects the Phones output but, if the Solo function is working, this must be correct.
      • July 22, 2020
    • timweed
      timweed Thank you Rex for the prompt reply! I ended up initializing everything an now it all works as imagined. Now I need to dig in to the ~manual. Best, Tim
      • July 22, 2020
    • timweed
      RexBeckett I'm glad you got it working, Tim. Have fun learning about all the amazing things you can do with that small box.
      • July 22, 2020
  • New
    redking
    Newcomer - Level 1
    2021-08-20

    Hi there

    I love my MR18 mixer / interface - what is the future of this lineup?  Looks like maybe it is near the end of its product cycle and maybe something else is in development?  Would love to see an "MR32" and see it go to the next level.  Maybe with 16 combi jack mic pres and make it expandible to another 16 with a stage box.  I could see this being a great solution for small studios that want the flexibility to take the rig mobile to record live shows.

    read more...
    1 37
  • New
    ohyngwie
    Newcomer - Level 1
    2021-03-29

    When I call the Music Tribe Vegas branch, They didn't answer and not call back, and the Musictribe email is set to Auto replying, so I leave a message here.

    I bought the MR18 thru Ebay(Seller was MusicTribe) in December last year, and there was a big noise problem on channel 1 and 2 at the time, so I got the RMA number thru the website and sent it to Thermal Relif Design.

    I sent Thermal Relif Design in February and it's been a month since they received my unit on March 2nd, but they haven't been able to fix it. Also They are waiting for new parts until now, And They don't know when the repairs will be finished.

    From April, I have a concert tour and I need my unit urgently. If Thermal Relif Design can't fix my unit by April 8th, then I want to just pick up my unit on April 9th. But They told me that needs to MusicTribe's authorization.

    What should I do this situation?

    Please help me out and Let me know.

    Thank you.

    read more...
    0 37
    • ohyngwie
      Nigel67 Hi ohyngwie, I am sorry that you have not been able to contact the guys in the Vegas office. If you could tell me your case number then I will contact the Service team and ask them to look into your repair and get back to you. I will also check as to why when you replied to the case that you received the RMA number on, all you received was an auto reply as that should not be the case.
      • Mar 29
Go to page