• New
    Planetsize
    Newcomer - Level 1
    2021-06-30

    Hi, I need to replace the capacitors in the Tannoy FSM crossover. Looking for a copy of the schematic to figure out values and sizes. 
    Thanks 

    Eric

    0 54
    • Planetsize
      DavidKnighton Hello Planetsize,
      Regrettably, we are not permitted to hand schematics to the general public. Only authorized service locations are allowed access to documentation. If you would like to find a nearby service location, please submit a support request by clicking the SUPPORT tab at the top of the page.
      • Jun 30
  • New
    Mathgora77
    Newcomer - Level 1
    2021-06-10

    Bonjour

    Mon tweeter ne fonctionne plus sur le HP coaxial, et j'aimerai savoir comment faire afin de le réparer, ou sinon de remplacer le HP. J'habite en France, sur Paris.

    merci de votre réponse

    Cordialement

    Mathgora77

    read more...
    0 53
  • New
    Paul53
    Newcomer - Level 1
    2021-02-20

    I'd like to know if bi-wiring is recommended for the Cheviot Legacy (I own).

    0 53
    • Paul53
      PedroRodrigues Hi, Paul53,please consider that most of our residential loudspeakers, and your Tannoy CHEVIOT are a good example have two sets of speaker terminals, one for the bass (LF) and one for the treble (HF).
      These are normally joined by links, and a single cable run is used to the amplifier.
      However, by removing these links, and using two sets of cable or a special bi-wire cable, the LF and HF are only connected together at the amplifier.
      Even the best cables suffer from losses due to their electrical resistance, inductance and capacitance, and so bi-wiring avoids interaction between the LF and delicate HF parts of the signal.
      This gives better clarity, detail and an improved soundstage. Your Instruction Manual will detail how to prepare your loudspeakers for bi-wiring, and your dealer will be able to advise on suitable cable choices for a given budget.
      For further information, please refer to our White Paper by following the link below:
      https://www.yumpu.com/en/document/read/22286929/tannoy-supertweeter-paper-in-pdf-format
      • Feb 22
      • Bi- wiring or not the Cheviot Legacy
        Paul53 Hi Mr.Rodrigues,
        • Feb 22
      • Bi- wiring or not the Cheviot Legacy
        Paul53 ... I was going to thank you, first. As a matter of fact, the theoretical benefits of bi-wiring are known. The question is if, in practice, such benefits are discernible. Moreover, there are those who believe the single-wiring sound is preferable...
        • 1
        • ·
        • Feb 22
      • Bi- wiring or not the Cheviot Legacy
        PedroRodrigues Hi Paul53 effectively I think they are specially considering that your Tannoy CHEVIOT has two terminals, one for the bass (LF) and one for the treble (HF). and in this case and I mentioned above by removing these links, and using two sets of cable or a special bi-wire cable, the LF and HF are only connected together at the amplifier.
        Even the best cables suffer from losses due to their electrical resistance, inductance and capacitance, and so bi-wiring avoids interaction between the LF and delicate HF parts of the signal.
        This gives better clarity, detail and an improved soundstage.
        • Feb 22
  • New
    JemG1
    Newcomer - Level 1
    2021-06-30

    Hi

    Can you still re-cone these monitors, please?

     Thanks 

    Jem

    0 53
    • JemG1
      Dale_M Hi there I would advise putting this through to the Team via a Technical support ticket from the tab above as this may take some investigation.
      • Jun 30
    • JemG1
      Nigel67 If you are in the UK, you could try Lockwood Audio - http://www.lockwoodaudio.co.uk/tannoy.htm or there is a someone on ebay who goes by the name of Mainly Tannoy.
      • Jun 30
  • New
    kooolman
    Newcomer - Level 1
    2021-06-23

    Hello.

    I have a Yorkminser He model.

    And unfortunately i lost my speaker's feet(spikes)

    How can i get this one?

    Thank you.

    'I borrow picture from " hifido.co.jp " '

    read more...
    0 52
  • JOAOSIMOES
    Newcomer - Level 1
    2020-07-07
    Hello friends, I registered a support ticket with the Ticket Number: CAS-116163-T3M6N6 - I really need a Tannoy Reveal 6 High Frequency Driver Type 0294-79000891B tweeter for my speakers, if it is not possible to deliver this driver please inform all technical characteristics such as: Size Inches, Membrane, DB, Ohm, Hz, Qts, Vas.L, so that I can buy on the market and replace it with a driver with similar characteristics. Or is the Precision 6 Japan tweeter the same? Anyway, I actually need to know if I have a chance to recover the speakers or not, I love these speakers.
    read more...
    1 52
  • New
    Tannoy
    Newcomer - Level 1
    2021-07-12
     
    The full range QCI A1-BL comprises a single 5" Glass Fibre driver and high-excursion rubber surround. Capable of handling up to 240 Watts the QCI A1 is extremely easy to drive and suits a wide variety of amplifiers and applications.
     
    List Price: $309

    #Tannoy #QCIA1BL #QCISeries #Loudspeakers #Passive
    read more...
    0 52
  • New
    mifu
    Newcomer - Level 1
    2021-07-25

    To all Tannoy Eaton owners-----How much toe in worked best for you?

    0 51
  • New
    vichaipart
    Newcomer - Level 1
    2021-05-21

    Hi team,

     

    Could you please let us know the part number of Tannoy CVS4 Grill, frame for Di5 black, Di6 black and Qflex16 Wall Bracket?

    0 51
    • vichaipart
      DavidKnighton Hello vichaipart,
      For these types of inquiries, please submit a SPARE PARTS ticket via the SUPPORT tab at the top of the page.
      • May 21
  • New
    Chrisatsparq
    Newcomer - Level 1
    2020-11-17

    Hello Am looking to buy replacement drivers for VX12`s Any help would be great Need 4 as it stands

     

    thank you

    0 51
Go to page