• luchien
    Contributor - Level 1
    2020-02-24
    0 153
    • luchien
      Paul_Vannatto

      Hi @luchien ,


      Welcome to the forum. There is no polarity setting in the DSP (or on the back panel) - I checked. You will need to do that in the console output.


       

      • February 24, 2020
    • luchien
      JeffRusin

      Well I know Paul is one of the smartest guys I know on this forum but on the dsp crossover button  I believe you can change the polarity 180 for a cardioid use but I'm sure I'm wrong lol

      • February 24, 2020
  • MarcelNYC
    Contributor - Level 2
    2020-02-17

    I have a pair of IQ15 speakers and wanted to downsize my 18" subwoofers to lighten the weight. My question is whether I can safely put an IQ15 on pole inserted into an IQ15B. My concern is whether there's a risk of it falling over due to both weighing almost the same.

    read more...
    0 140
    • MarcelNYC
      MarcelNYC

      For those interested, I heard back from Turbosound and they stated I can place the IQ15 on a pole on top of the IQ15B. There are no issues with weight distribution and the set up would be secure from falling over.

      • February 24, 2020
  • richg45
    Contributor - Level 1
    2020-01-12

    Can you use a different mixer with the Inspire 1000? I need more channels

    0 139
    • richg45
      DaveMorrison

      @richg45 


      Yes. That's the way most people would use it. 

      • January 12, 2020
    • richg45
      Diepsloot

      I'm a Mobile Dj and use this behringer mixer to give me a few more channels, for say more mics or instruments, or emergency inputs like a phone or another bluetooth receiver. The mixer allows me to have an output channel for a monitor in which I control the volume right on the mixer. It also allows me more headroom, more volume control than just a computer and a controller by itself.  
      BehringerX1204 USB - 12 Input 2/2 Bus Mixer with EFX and USB
      fcdd8d45545f5b79e3667b5d23c73da6.image.500x500

      • January 18, 2020
  • JulienRutyna
    Contributor - Level 1
    2019-06-11

    Bonjour,

    Je possède depuis 1 an 2 ip3000, j'ai deja eu 2 retour de garantie car une colonne s'est arreté d'un coup en pleine soirée. L'ecran reste allumé, les fonctions sont accessible mais aucun son ne sort.
    Aujourd'hui j'ai encore un probleme avec des coupures de son de 2 secondes toutes les 3 minutes sur une colonne.
    Je ne comprend pas cette enorme manque de fiabilité pour une marque comme Turbosound surtout que je fais attention a mes volumes d'entrée , j'ai lu sur les forums que c'est un soucis recurrent sur ce modele. Que puis je faire pour ne plus avoir de soucis car j'aime beaucoup ce modele qd il fonctionne.
    Merci beaucoup

    read more...
    0 134
  • robykock
    Contributor - Level 2
    2019-05-23

    Hi I am helping a customer but not sure the proper mounts to use for the IP300 to hang them or suspend them from wall.  What is best practice for doing this?

    Robert

    [email protected]

    0 133
  • New
    marciodantasdj
    Newcomer - Level 1
    2020-11-05

    Hello, I'm having trouble finding this ix12 button, could someone help me? where do I find to buy?

    thanks

    0 131
    • marciodantasdj
      DavidKnighton Hello Marcia Dantas,
      You can order these from Music Tribe by clicking the SUPPORT tab at the top of the page and submitting a SPARE PARTS ticket. Please provide the picture and model number on your ticket. Someone should be able to source this part.
      • November 5, 2020
  • gm12338
    Contributor - Level 1
    2019-10-12

    I sent back a Samson VX8.1 line array pa unit that was not working properly and decided instead to buy a Turbosound IP1000 which I rec'd 10/12/2019.  I only ran the IP1000 a few hours to practice on my Roland RD-2000. The rear metal plate where inputs plug in, gets almost too hot to touch.  Should I be concerned about internal heat build up as I don't see a visible cooling fan nor any air vent ports.  On the Samson VX8.1 I returned, plus many other models I've researched, do have a visible cooling fan and or air venting with some having possible non-visible internal fans. On this blog somewhere, I read someone was asking IF there was an effective way to retrofit a cooling fan solution for their speaker.  I do "know" that excessive heat does in fact break down electronics over time.  IS there any internal fan or any air porting/venting in any of the Turbosound Inspire IP1000 thru IP3000 models? I like the sound I'm hearing, I'm also thinking about pa system longevity too.

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

    read more...
    0 127
  • etbMike
    Newcomer - Level 1
    2020-07-06
    Anyone know where to buy a TS-18SW2000A6? It's the 18" speaker in a Turbosound iQ18B.
    0 127
    • etbMike
      RexBeckett I suggest that you open a Care ticket. At the top of this page, click Support -> Care -> Create a Care Ticket and select Type: Spare Parts. Make sure that you enter all required (*) data before clicking Submit.
      • July 6, 2020
    • etbMike
      etbMike I already did that. Thanks Rex!
      • July 6, 2020
  • JeffVance
    Contributor - Level 2
    2020-03-14

    Anyone else have a similar experience? One of my ip2000s started making some extremely audible cracking sounds in the high and mid-high sections. Removing all inputs, turning down the master volume and input gains had no effect.

    I applied a sharp percussive maintenance to the back panel and the behavior stopped and did not return for the rest of the night. Physical inspection of the amp section did not show anything out of sort, but I did reseat the input to power amp ribbon cable for good measure. 

    I'll update here if it happens again.

     

    Thanks!

    Jeff

    read more...
    0 127
    • JeffVance
      GaryHiggins

      @JeffVance 


      Hello, I like your method


       


      "I applied a sharp percussive maintenance to the back panel"


       


      Sometimes my preferred tool over all is the hammer!


       

      • March 14, 2020
    • JeffVance
      AngelSalazar I have exactly the same Issue Help Me Please :'(
      • May 17
  • Gagandeep
    Contributor - Level 1
    2020-02-12

    I have ip 15b, its output channels are working good but sub has no audio output 

    0 125
Go to page