• kendrum1
    Contributor - Level 1
    2020-04-26

    Hey all!

    Currently own 2 ip1000 v1s and love them! The only issue I keep running into is drunken college kids thinking they're sturdy enough to hold onto. It's only happened a couple of times, but that sickening crash of one of these things hitting the floor is enough to cause a panic attack. Thankfully, they are built like a tank and I haven't had any sound problems, but I know that can only last a few more tumbles.

    Has anyone built or 3D printed some sort of stand/bracket/legs for the sub unit to help prevent this from happening? All suggestions welcome!

    read more...
    0 105
    • kendrum1
      AlexLane

      Hi @kendrum1 



      I believe I have seen some solutions from users on the facebook forums, I would suggest joining the "Turbosound INSPIRE users" group on facebook and posting this there.


       


       

      • April 26, 2020
  • MarkMcGreevy
    Newcomer - Level 1
    2020-10-19

    Hi, i was wondering if Turbosounds sells a replacement handle for a IQ18b, i have only had it for about 3 years but can't seem to find the original sale reciept for the warranty   Thanks

    0 105
    • MarkMcGreevy
      RexBeckett Hi Mark, I suggest that you open a Care ticket for this. At the top of this page, click Support -> Create a Care Ticket and select Type: Spare Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • October 19, 2020
    • MarkMcGreevy
      MarkMcGreevy I opened a case CAS-149014-G8V6X5  but not sure if I waited to long to respond..
      • October 31, 2020
      • Turbosound IQ18b
        RexBeckett The Care team usually respond within 2-3 working days. Keep watch on your email spam/junk folder.
        • October 31, 2020
  • Armand_RSA
    Regular Contributor - Level 1
    2020-04-05

    Hi all,

    Can the engineers please have a look at the firmware 2.2 on the IQ's. 

    2 things to check: 


    1 - The input/output level meters on the LCD (and on the Turbosound EDIT software) indicates that the "IN" stage (pre DSP) CLIPS before the "OUT" (pre amp) stage. 

    Here I have a thread about it: https://community.musictribe.com/t5/Loudspeakers/Turbosound-IQ-Series-Input-vs-output-levels-FW-2-2-and-limiter/td-p/277885

     


    2 -  The FBQ Feature does not operate correctly. The LEARN feature produces no "click" as the HW:A units do.

    Here is a thread about this issue: https://community.musictribe.com/t5/Loudspeakers/Turbosound-IQ-Series-FBQ-Questions-Release-time-Auto-vs-Single/td-p/277951


    Regards

    read more...
    0 104
  • PatrickLenuweit
    Contributor - Level 2
    2020-07-10
    Hello, I tried to update the firmware to 2.2.2 via the Android Turbosound app. The connection between tablet and turbo sound is established (.. handshake ... erasing rom ...) but then the progress bar remains at 0% and the turbo sound is permanently in firmware mode. Unfortunately the firmware file cannot be loaded from the Turbosound homepage (error message on page, seems to be offline). CARE ticket already created, so far no feedback. Ideas why? Otherwise I send everything back to MusicStore, soon I don't feel like it anymore. Maybe someone can send me the firmware as a file and then try the Bluetooth share please. By the way: there are pixel errors in both displays, although the resolution is very low. Why that bad quality?
    read more...
    0 103
    • PatrickLenuweit
      ChrisEdwards1 Hi Patrick, hope you are well. I have just sent the firmware file across to you in your case along with some additional feedback on the display. Hope this helps.
      • July 10, 2020
    • PatrickLenuweit
      PatrickLenuweit Dear Chris, Thank you for sending the firmware file quickly, the firmware upgrade worked perfectly for both speakers without an APP via Bluetooth Share. The speakers are working properly.
      • July 10, 2020
  • asui
    Contributor - Level 1
    2019-10-29

    Where can i relocate the Top columns for the turbosound ip 3000 for purchase  thanks

    0 102
  • Armand_RSA
    Regular Contributor - Level 1
    2020-04-12

    When you select different X-over options on the Turbosound IQ-18B it makes a very loud "POP". In the video you can see it actually pushes the OUT level to LIMIT. If you adjust the X-over on the IQ unit itself it does the same. 

    HW:B - Firmware 2.2

    Here is a video to show: (https://youtu.be/CFG1_xyOBoo)

     

    read more...
    0 102
    • Armand_RSA
      AlexLane

      Hi @Armand_RSA 


       


      Reply from the firmware engineer:


       




      "I will have a look at those issues asap. 


      Right now I don't have any hw here at home so I have to pick up the demo board from the office.


      I'll come back to you soon... thanks for the feedback!"

      • April 13, 2020
  • New
    singaporerock
    Newcomer - Level 1
    2020-12-11

    Hello,

    i submitted a request for spare parts and schematic for ip3000 oct17th and still havent heard a peep

    could you please provide part numbers and quote for

     

    2 low frequency drivers

    2 midrange drivers

    power amplifier board

    the clip/wiring harness that goes on the top of the subwoofer that connects into the tower of speakers

     

     

    Case Number CAS-148542-Y5B8L6 .

    read more...
    0 101
    • singaporerock
      ChrisEdwards1 Hi Robert, I am sorry to hear you have not yet had a response to your inquiry. Our spears team is currently experiencing a higher than average case load at the moment, however, I will make them aware of the situation and they will endeavor to reach out as soon as possible.
      • December 13, 2020
  • TT23
    Newcomer - Level 1
    2020-07-08
    Hi all, any help greatly appreciated. My active wedges have developed a fault.......they both emit a loud squeal / hiss / crackle whenever I plug any XLR into them. Anyone come across this? As above, annoyingly I can't open a care ticket. They were bought directly from Turbosound when they were in Partridge Green, UK. https://www.fullcompass.com/common/files/17445-TXP121UserManual.pdf Adam
    read more...
    0 93
    • TT23
      Nigel67 Hi TT23, if you could put in a support ticket, put another model name in, but in the Subject and Description just highlight the actual speakers you are describing and a colleague will pick the case up and answer you.
      • July 8, 2020
    • TT23
      TT23 Thanks Nigel, as I'm then prompted to add the serial number I suspected the ticket wouldn't go thru but will try. Fingers crossed
      • July 8, 2020
      • TXP-121 Fault (Not a model option when opening a care ticket)
        Nigel67 Just put in 123456. There isn't a check on the serial number
        • July 9, 2020
  • LTOWNPOET
    Newcomer - Level 1
    2020-09-23

    I just received my ip2000. And at least one of the drivers in the bottom half of the column array is rattling. When I swapped it out with my old ip2000 lower column it dived the problem. So I need another bottom column for the new ip2000 that I bought from Musistribe. 
    also my older V1 ip2000 has developed a rattle in the top column . I'd rather not return the whole unit . I'd like to return the defective column instead of the entire unit.

    and I'd like to also get a top column that doesn't have a diver that rattles 

    read more...
    0 93
    • LTOWNPOET
      john0121 Hi Kurt, please submit a service request via the support button at the top of the page. The team can then advise of the options available depending on the warranty status. Thanks
      • September 22, 2020
  • JACKOD32
    Newcomer - Level 1
    2020-07-08
    Hello, everyone, thank you very much for welcoming me to this site. so here I am looking for diaphragm for my TURBOSOUND head ... if anyone knows where to buy or find RD-112 diaphragm for Turbo Aspect TA880H please? it's quite urgent . Thanks in advance .
    read more...
    0 92
    • JACKOD32
      RexBeckett At the top of this page, click Support -> Care -> Create a Care Ticket and select Type: Spare Parts. Make sure that you enter all required (*) data before clicking Submit. The Care team will respond by email.
      • July 8, 2020
Go to page