305,516 members
189,825 posts
  • New
    Triber Moderator

    The new cross-platform FLOW Mix App for iOS tablets and mobile phones offers wireless remote control for the Behringer FLOW 8 Digital Mixer. This App is using Bluetooth to connect to the hardware. 

    The FLOW Mix App gives musicians, producers, or engineers control of all mixer parameters. This includes levels, panning, eq, compression, and effects as well as snapshot memory. 

    The plain user interface is designed for comfortable operation on tablets as well as small-format smartphones. Features like Assisted Setup and the Stage-View are aimed at inexperienced users to provide intuitive access to a world of great sound. 



    • Full remote control including: 
    • Preamp Gain, 48V on MIC 1/2 
    • Main-Mix Level, Pan, Mute, Solo 
    • All Input Channels with Low-Cut Filter, 4-band EQ, and Compressor 
    • Bus-Sends to FX and MON-Out 
    • Main and Monitor Buses with 9-band EQ and Limiters 
    • Customize channels with Icon and Name
    • Use Assisted Setup to have a quick start as a beginner
    • Load and store Mixer-Snapshots in the App or on the Hardware 
    • Balance your mix from the Mixer- or Stage-View 
    • Activate or Hide certain inputs to focus on the channels you need 
    • Change routing according to your workflow 



    * App 1.6 requires FLOW 8 mixer firmware V11749 or higher 


    What’s New (Android) 

    18.Jan2022 (Version 1.6) 

    • New pre-fader routing option for Monitor 1/2 bus send 
    • New preference for indicating Mute buttons on mixer page 
    • New channel icons displayed in mixer and stage view 
    • Tap Tempo can now be adjusted on all layers in Stage View 
    • New preference for operating controls with a rotary gesture, 
      and performance of linear gesture improved 
    • Preferences and Routing pages can now be scrolled on small devices 
    • Connectivity issue with some Android 10 devices fixed 
    • Android 12 support added 
    • Fixed an issue to start a new session 

    What’s New (iOS) 

    23.Jan2022 (Version 1.6) 

    • New pre-fader routing option for Monitor 1/2 bus send 
    • New preference for indicating Mute buttons on mixer page 
    • New channel icons displayed in mixer and stage view 
    • Tap Tempo can now be adjusted on all layers in Stage View 
    • New preference for operating controls with a rotary gesture, 
      and performance of linear gesture improved 
    • Preferences and Routing pages can now be scrolled on small devices 
    • Fix for Mute/Un-Mute display issues in Stage View 
    • Fix for missing dB reading tooltips 
    • UI glitches in configuration page fixed 
    • Fixed an issue to start a new session 


    2 666
  • New
    Triber Moderator

    Phase 4 WING CoPilot offers valuable control in different types of live or studio work, when the audio engineer is remote from the console or when tasks are split with techs on stage. It offers specific user interface modes for Performance Setup and patching, Personal Monitoring, Metering overviews as well as full SD Recorder control. The Front of House mode provides full remote access to channel processing and mixing, and it now features full graphics UI for all plugin and insert effects. 

    Note that CoPilot 1.10 is designed for WING console firmware 1.12 or higher. Please visit to download and install the latest firmware and enjoy the full potential of your WING. 

    This new WING CoPilot version 1.10 offers: 

    New Features

    • add FW version detection to support different snapshot data models, required for WING FW 1.12 or higher 
    • WING LIVE SD Recorder > improved remote control for Session and Marker list 
    • Front of House >all channel plugin effects support graphic frontplate UI editing in mini-preview and in fullscreen views 
    • Front of House > all 16 FX processors can be edited directly from the channel/bus insert using the mini-preview or the full-screen view 

    Phase 1. Performance Setup: 

    This section is specially tailored to the activities during setup and line-check. Prepare all Sources and Outputs while patching signals to I/O boxes on stage. Sources can be named, tagged, given a color or an icon. Sources also own the head-amp properties such as gain or phantom power. 

    Phase 2. Metering: 

    Additional metering can be displayed on your iPad next to your console touchscreen. It includes levels of all Sources, Channels and Outputs and an RTA that can follow the selected channel or be assigned to a fixed signal path. 

    Phase 3. Monitor Mixing: 

    The Monitor Mixing UI provides the essential parameters of personalized monitoring applications. In addition to individual channel sends, this section also provides an MCA view, where several channel sends can be adjusted by a single Mix Control Association. It also offers a lock function to reduce the risk of accidentally selecting the wrong bus. Up to 4 MCAs can be given a descriptive name for the associated group of channels, and color can be selected for additional clarity. Once the channel assignments are made, the MCA sliders can be used to increase or decrease the level of all associated channels at once. 

    Phase 4. Front of House: 

    The FOH section is designed for mixing from within the audience, essential when placing the console in a less than optimal position. Aside from a good overview of all fader layers, this section also provides access to the processing of channels, buses, mains and matrices. The new SD Recorder page allows full remote control over Recording and Playback functions. 

    Phase 5. Snapshots, Scenes, and Show Management 

    Key Features

    • Patch and Customize all Sources, Channels, and Outputs 
    • Configure all head-amp properties 
    • Patch Sources to Channels and Outputs 
    • Set up and control the Talkback 
    • Metering for single Sources, Channels, and Outputs 
    • Control Monitor-Mixes for IEMs and wedges 
    • Full FOH (front of house) mixing control 
    • Graphics UI for all effects with mini-preview and fullscreen views 
    • Full remote control of WING LIVE SD Recorder 


    * Requires a wireless router connected to the WING Personal Mixing Console 

    * WING CoPilot 1.10 requires WING console firmware V1.12 or higher

    1 525
  • New
    Newcomer - Level 1

    Please somebody explain to me why there is no offline edit/demo mode on the Wing Co-pilot app. So many times I am away from my mixer but want to mess around with the app and some different functions. Please update the co-pilot app!

    1 455
    • Gabejcole
      Nigel67 Hi Gabejcole. I will pass this request on to the software team. Many thanks.
      • July 5, 2021
    • Gabejcole

      Hi , we was expecting that the offline copilot app for wing to be released soon , also how about the PC based , the M32 and X32 have the edit app , will you release for that also ? i dont know the others but for me i am using 2* 27 inch touch screen that is conected to PC ,which helps alot . Thanks Regards

      • Jul 8
  • srasi009
    Newcomer - Level 1

    What type of router should I get for my X32 console? There are so many and I am having trouble picking the correct MB per second

    0 176
    • srasi009
      RexBeckett It does not need to be super fast. 1200 Mbps would be enough. It should be a dual-band router and you should use the 5GHz band because it is more resistant to interference from phones and other Wifi devices. Look for one that supports 802.11ac Wifi and has multiple external antennae. It is also an advantage to have at least two LAN ports so you can connect a wired laptop if/when necessary.
      • July 21, 2020
    • srasi009
      DavidKnighton Hello srasi009. Any simple router will do. The feature that I would consider before purchasing is WiFi RANGE. The lower end models don't have very good range, which means that the signal will degrade faster when there's a bunch of phones/tablets in the room. Users will often have a good soundcheck, but once the room is filled with guests, the WiFi signal starts to become unreliable. Get a router that has decent range for your expected environment and keep it as close as possible to the area in which it will be used most heavily. Notable brands, Linksys, Netgear, Cisco, TP Link. Avoid using Apple products as they are finicky with these consoles.
      • July 23, 2020
    • srasi009
      JasonAdamses All you need is a good Router and it doesn't need to be connected to the internet. I use a AC1250. Plug the Router into the Ethernet port on the back of the Rack.. In the Setup Tab in the X32Rack setup the Connection. Connect your laptop/pc/or tablet to the Router. Connect and go. I use low cost Android Tablets with Mixing Station Pro with very good results. There is Mixing Station and Mixing Station Pro that is available. (Mixing Station Pro is well worth the few dollars it cost!) Behringer also has X32 Edit software as well. For me I find best antivirus apps for iphones here: and it best to have the Router fully booted up and on before turning on the mixer. Again Mixing Station Pro is a great app to start with. ;-)
      Just know you may struggle at first to get it all going. May require some updates to the desk and software to get everything on the same page if you will. Here is just one example from YouTube. I'd also recommend spending some time with Drew Brashers videos as well.
      • Apr 9
  • New
    Newcomer - Level 1

    Is the X air 18 compatible with a galaxy tab a7?

    0 118
    • tedf0rd73
      Paul_Vannatto It should work fine. I've been using a Galaxy Tab A 8" tablet with the X-Air and X32 consoles for over 5 years now without any issue.
      • May 26, 2021
    • tedf0rd73
      tedf0rd73 Awesome!! Thanks, Paul
      • May 26, 2021
    • tedf0rd73
      tedf0rd73 How do I download the app to control my XAir 18?
      • July 7, 2021
    • tedf0rd73
      Paul_Vannatto Go to the Play Store and search for X-Air App. The best app is Mixing Station Pro.
      • July 7, 2021
  • New
    Contributor - Level 2

    I'm a big fan of the Wing-Q app, I like that it is super obvious and easy to use. My only issue, is I am about to try and explain to some older folk how to use the app, and on a normal phone, the channel names are tiny! I'm not sure anyone will be able to read it... 

    What I was wondering, is whether it would be possible to have the channel name text size, and fader lengths increased, as far as they can reasonably go (possibly as an optional thing) to make it easier to read which channel is which, and to accurately adjust the faders. I realise that partly it is a tradeoff for having 12 channels per layer, but I took a screen grab on my phone, and highlighted some ideas where some space could potentially be saved to maximise the available area for the channel names. Any increases in text size would be much appreciated! 



    0 114
    • StephenEvans
      Dale_M Thanks for your comment I will pass your remarks over to the design team for consideration.
      • May 1, 2021
    • StephenEvans

      Very good! It's great to know this information, let's try and play [wordle]( for more interesting knowledge.

      • Oct 20
  • New
    Newcomer - Level 1

    Hi all. Just bought a flow 8, love it but it can only run from my iPhone 6s which is updated to the latest iOS update....5 year old iPad couldn't connect to there a minimum iOS/model of iPad which can be confirmed to work with the Bluetooth controlling system? iPad would download the app no problem but not connect to the desk no matter how many ways I tried! Would be far easier running it on a bigger screen rather than a tiny phone screen, thanks!

    0 111
    • OzzyC1987
      Dale_M Please see the spec (snippet attached) full document can be found at the App store here:
      • Apr 8
    • OzzyC1987
      RickStockley Unfortunately, the specs are a bit misleading. While it does state iOS 9.0 or later, it still will not work with the iPad Mini gen1, running iOS 9.3.5 (due to the BT version on the iPad, I believe). When I purchased the Flow 8, I had initially hoped it would work with my iPad. Regardless, still an awesome mixer!
      • Apr 14
  • New
    Newcomer - Level 1

    I feel so silly, but I can not for the life of me find the software needed for the podcastudio2 ive been looking for hours and the quick start guide says to download software before connecting it to my mac. PLEASE HELP

    0 107
    • tonemotivates
      john0121 Hi Tonya, sorry it's missing from the webpage for podcastudio 2. You can find the same software bundle for download on this page though:

      Just click software on the right and there is a link for "all software for mac". Don't forget to register the product too (via support button) and you'll get a redemption code for Tracktion DAW.
      • December 7, 2020
  • cleansugar
    Newcomer - Level 1

    Would you please send me a Behringer X32-Mix 2.3.2 ~ 2.0 for ios 5.1.1(iPad 1) ipa file?


    I can not find anything on internet.


    Thank you very much.


    [email protected]

    0 87
    • cleansugar
      john0121 Sorry we can only provide through the app store and can only list the latest version. We aren't able to provide an older version for iOS5.
      • September 23, 2020
  • New
    Newcomer - Level 1

    Looking to purchase an iPad Air to control it.

    Will the first Gen iPad air with the 12.4.9 firmware work?

    Should I purchase this iPad?


    0 82
    • BroJamesReece
      DaveMorrison 12.4.9 will work with both Mixing Station Pro and X32-Mix. X32-Mix hasn't been updated for three years and a lot of features don't work—notably routing. Mixing works fine though. Mixing Station is updated regularly and is highly recommended.
      • November 14, 2020
Go to page