Statistics

305,984 members
190,328 posts
  • New
    jc22
    Newcomer - Level 1
    2022-03-11

    How do i connect from usb in to L/R xlr out?

    0 29
    • jc22
      KevinMaxwell If you are trying to get the output from a computer (for stereo playback) into a mixer for a sound system then a device like this would do the job. There are more expensive ones and you can also get this one a little bit cheaper then from this site. I just picked up one of these for someone yesterday. https://peavey.com/usb-p-usb-playback-device/p/03001370 they will be playing a keyboard thru a computer with all of the sounds in the computer and need to then get it into the sound system for a musical. There are actually 3 keyboards with 3 different players and we already had 2 of the Whirlwind pcUSB devices that cost about $200 each but we needed another one and quickly so I got one of the Peavey units.
      • Mar 12
    • jc22
      GaryHiggins Are you asking about routing USB return ch tracks or an actual usb type instrument? In the event you are talking USB card ch's...
      • Mar 12
  • New
    donmartell2825
    Newcomer - Level 1
    2022-10-22

    I connect ok and everything works but if I touch the effects icon in the iPad, the screen goes blank and the app closes. New iPads all three updated to latest rev. 

    thanks

     

    Don Martell

    0 26
    • donmartell2825
      GaryHiggins X32-Mix? If not I suggest trying Mixing Station for iOS. Not sure when X32-Mix was last updated. Mixing Station is updated very often. My bet is an issue exists with the the latest iPad updates.
      • Oct 24
    • donmartell2825
      Nigel67 Hi donmartell2825. I am sorry, but unfortunately this is a software bug that the Software team are aware of and investigating further. There is no release date for a fix at the present time. As Gary mentioned, if this is required urgently or there is no other work around, then you could try using Mixing Station. Many thanks
      • Oct 26
    • donmartell2825
      smball3 I’m having the same issue with my brand new iPad Pro Gen 5. Is there a workaround?
      • Oct 28
    • donmartell2825
      Paul_Vannatto The workaround is to use Mixing Station instead.
      • Oct 28
    • donmartell2825
      donmartell2825

      Here’s what fixed this issue finally. I updated my iPads to 16. Now everything works fine. Thanks for the advice everyone.

      Don

      • Oct 28
  • New
    bhendrix2982
    Newcomer - Level 1
    2022-02-09

    Any recommendations for not a brand new iPad but something refurbished? Year models that are compatible with the M32 software on iPads? Any help is appreciated. Just don't want to drop another $1-2k on a new iPad right now. 

    0 26
    • bhendrix2982
      Paul_Vannatto Mixing Station should work with older iPads
      • Feb 9
    • bhendrix2982
      GaryHiggins 5th generation works well. Model MPGT2LL/A (also runs Mixing Station well)
      • Feb 10
  • New
    dmorrier
    Contributor - Level 3
    2021-11-08

    A couple of years ago, someone had mentioned that the Midas M32C has crossover functions built-in. In specific, they had stated a Linkwitz-Riley Crossover was there. I do not see this or any other crossover available (M32C accessed via M32 Edit). I understand the Matrix busses combined with equalizers can provide this functions but thought it would be better if a built in crossover function was used. 

    read more...
    1 22
    • dmorrier
      KevinMaxwell Go to the EQ page on EQ page on the L/R or Mono or any of the Matrix outputs. Then on the Low or the High bands of the EQ on the Mode (pull down menu) you will see the options to change those to the crossover filters.
      • November 8, 2021
      • M32C Crossover Support
        dmorrier That answers it. Thanks
        • November 8, 2021
  • New
    enzee212
    Newcomer - Level 1
    2022-09-27

    Hello! I hope my question is easily answered.

    I am using the Midas M32C along with the DL32 stage box. This rig functions as the “brain” of our live shows supplying our IEM system as well as giving a feed to FOH.

    I have the Dante card installed in the M32C.

    My issue is that the levels coming of of the Dante card to my DAW are extremely low and do not reflect the gain structure that we have established in M32C as show in M32 Edit. For example, I can see in the Midas software that I am getting a full signal anywhere from -6 to 0db, but when I look at what Dante is sending to my DAW, those numbers are averaging -30 to -20db. 

    For my connections, I am going out of the primary port on the Dante card right into my laptop.

    Can we assign what feeds the Dante card? Is there a layer of gain structure that I am missing here? Shouldn’t the Dante output reflect what the M32C is showing?

    Thank you so much in advance for any help on this frustrating matter. It’s much appreciated!

    read more...
    0 20
    • enzee212
      GaryHiggins If you are using local out for card ch’s it may be the issue. Maybe try using something like the p16 menu so that you can get a tap point beyond the input itself. Each p16 ch can be a direct out of each specific ch and you can set the tap to be say post eq or even post fader.
      • Sep 27
    • enzee212
      GaryHiggins Resolved??
      • Sep 29
  • New
    clementsandrin
    Newcomer - Level 1
    2021-12-15

    Hi there, 

    I am looking for a controler for my daw (live) and my m32c and i was wondering if any controller was compatible as the behringer x touch (who seems a little fragile) ? I think about qcon pro G2 or the mackie controler Universal. I Saw that the m32 work with mackie control or hui so i think there no problem, maybe its too hard to configure together ?


    Thanks you for your help
    Clément

    read more...
    0 19
  • New
    drevi
    Newcomer - Level 1
    2022-01-08
    Hi there,
    I think I discovered a bug in the current m-air-edit (1.7). 
    I can successfully change or delete the shortcut keys or add an additional shortcut key, but they are lost when the program is quitted.
    Saving the scene on the hard drive or something similar does not help either.
    ...or am I doing something wrong? Thanks and regards
    Zoltan

     
    read more...
    0 19
  • New
    JoeWelfeld
    Contributor - Level 2
    2022-03-06

     

    I am trying to figures out how to change the front panel  inputs to outputs.

    0 19
  • New
    uncleuccgm1
    Newcomer - Level 1
    2021-11-12

    My MR18 produces loud squeal noisel at  power off.

    The squeal is present at all output, it's so loud that it could damage my speakers

    Please, I need solution to this problem

    0 18
    • uncleuccgm1
      Paul_Vannatto Are you turning off the MR18 before the amps? If so, that could cause it. Always turn off the amps before the MR18
      • November 11, 2021
    • uncleuccgm1
      uncleuccgm1

      That is not okay to me, if someone mistakenly turn off the MR18 before the amplifiers, that could damage the speakers. What about the IEM? because the loud squeal is present at all output!

      • November 11, 2021
    • uncleuccgm1
      Paul_Vannatto That has always been a rule for turning PA equipment on/off - amps on last, off first. The MR18 does have a Safe Levels setting (in M-Air Edit, Setup, Audio/Midi screen) that mutes the outputs before power is turned off. If you are getting it with IEMs, you either have compressors set incorrectly or a hardware issue. If you save your scene (using M-Air Edit) to a file, then save it to the cloud (eg. Google Drive, Dropbox, etc.) and share the link in your next post, I'll be glad to have a look and better advise.
      • November 11, 2021
    • uncleuccgm1
      uncleuccgm1

      https://drive.google.com/file/d/1f5MIslalRd3KGWwiZsdAD7nXqZnbFOd9/view?usp=drivesdk

      • November 12, 2021
    • uncleuccgm1
      Paul_Vannatto Thanks for the scene file. You are only using bus 5 for a monitor, which seems fine. I think the biggest problem is the channel EQing. I would suggest you rework the channel EQs. Channel 4 (Stage 2) EQ needs to be particularly pulled back to 0 db on all bands to start with. Change the low band on channels 4, 5 and 6 to PEQ (instead of low shelf). With them as low shelf most of the vocal signal is not there, meaning that the rest of the system has to be boosted, creating potential feedback in the higher frequencies
      • November 12, 2021
  • New
    kylkylmccluer
    Newcomer - Level 1
    2022-01-21

    I have a coupel of M32R consoles that I need rack ears for asap. Does anyone know of any other ears that would work with the M3R or where to find more of the orignal rack ears? Thanks so much. 

    0 18
    • kylkylmccluer
      Dale_M Please go to the support tab above and submit a Spares ticket so the team can advise you.
      • Jan 21
Go to page