Statistics

260,531 members
139,127 posts
  • New
    dallaskruse
    Contributor - Level 2
    2021-08-24

    1. Is the only way to rename Group Names is via saving a .csv file as "names.csv" onto an sd card and then importing into the DP48

    2. How do I reset the Group Names on the DP48 to their default if I want to revert my group name changes?

    read more...
    0 20
    • dallaskruse
      Paul_Vannatto 1. The only other option at this point is to name the groups from the X32 Library, AES50 screen.
      2. You could create a names.csv file with Group1,Group2,Group3, (etc.) or whatever the default names were. I haven't seen those default name in over 2 years (so don't remember).
      • Aug 24
      • How to reset DP48 Group Names
        dallaskruse I'll be using the DP48s with different groups so I was hoping to be able to rename the Groups easily.
        • Aug 24
    • dallaskruse
      Paul_Vannatto What I've been doing is to setup preset files for each band, including the group names, then saving them to the 12 internal storage areas and/or to the 12 presets on the SD Card. I also store them on my laptop using folders for each of the bands.

      2 years ago (Aug 16, 2019) I did sound for a Woodstock 50th anniversary festival where I had to get 5 tribute bands and one local band through in 9 hours and used the 4 DP48 for their monitors. Since these were still beta (weren't released for sale until December), I had 20 minutes (or less) to make the changeover and teach the musicians how to use the DP48. Everyone loved them. The success was due to the stored presets for each of the bands.
      • Aug 24
    • dallaskruse
      Paul_Vannatto I had also started to develop an offline DP48 preset editor, but gave up because these files also include a checksum and my checksum generator routine never came up with the same checksum the DP48 was expecting.
      • Aug 24
  • New
    dghuang
    Newcomer - Level 1
    2021-09-03

    Anyone know where I could find a replacement power supply for the s32?  

    Our s32 just stopped working.  We've tried other cables. It just won't turn on... no LEDs, no fan, etc.  

    We figure maybe we could open it up and replace the power supply. 

    Any suggestions?

    read more...
    0 20
  • New
    RexMiller
    Contributor - Level 1
    2021-09-18

    I've just created a new USER 01 on the XR 18 in X AIR Edit for a Mac.
    I put in 10Channels (10th being the L|R Main Channel.)
    After saving a "Scene and Snapshot" of everything, I closed it down then relaunched the program.
    When I went to load the USER 01, my MAIN L|R channel has disappeared, along with the 3x buttons "Select/Move/Resize". I've shut it down, rebooted my laptop, but they're still missing.
    I understand for Windows PC the settings are stored in the file X-AIREdit.init and you can fix the problem by editing the file and reducing the first number in the line that starts: -localprefs/user1 8 OFF 21 22 23 ... which is near the end of the file or to just delete the file and the X-Air Edit will recreate it when you start it again.

    How is this done on a Mac where is the file located? Thanks 

    read more...
    0 18
    • RexMiller
      DaveMorrison look at the "com.musictribe.X32-Edit.plist" under in your Users/Library/Preferences (~/Library/)
      • Sep 18
    • RexMiller
      RexMiller The only file I could find was com.musictribe.X-Air-Edit.plist. I deleted it , initialized the mixer and did a hard reset. User1 still uneditable. Came up with the same number of channels but empty unless I loaded a scene. Seems as though once it’s done, the mixer stores it that way permanently. Did not see any language in the plist referring to Utility User1. May have some plist elsewhere that I cannot find. Been very frustrating. This was mention 3 years ago and still nothing done to fix this.
      • Sep 18
    • RexMiller
      Paul_Vannatto What version of X-Air Edit are you using? Version 1.7 (linux) works fine here.
      • Sep 18
    • RexMiller
      RexMiller Using Version 1.7 on a Mac.
      • Sep 18
    • RexMiller
      RexMiller Finally got it working. Discovered that even after deleting the plist, initializing the system from Setup, then opening and closing the program, it does not create a new plist until a scene is loaded. So I deleted the plist, initialized the program and saved that as a scene. Closed then opened it and loaded the scene and I was able to edit the User1 again. After deleting some channels from it I then loaded my scene that I had from a previous setup and the User1 worked again. It is buggy how that works and whatever scene your in, the number of channels selected from the User settings never change unless edited. Even then it carries over from the last change. There is a limit to how many channels one can add before things disappear but I’m not sure what that number is. The software needs fixed for the User settings for sure.
      • Sep 18
  • New
    sbaker4
    Newcomer - Level 1
    2021-11-14

    Overnight my XR18 started doing this after months of working fine. Inputs 9-16 now have noticable white noise added early in the signal chain, mixed with the input signal.

    The noise level changes when Mic Gain or the channel fader are adjusted.

    The noise stops when the Channel Source is switched from Mic/Line to USB (or the channel is muted)

    I've tried power cycling, upgrading the firmware to 1.18, and initializing the settings to factory through X-Air-Edit, all with no change.

    Can anybody help with this?

    read more...
    0 15
    • sbaker4
      KyleJohnson Hello, Kyle here with Music Tribe. Unfortunately it sounds like it could be a physical fault, I'd recommend submitting a support ticket. Click on Support and then click on Care/Service to submit a ticket.
      • Nov 14
    • sbaker4
      sbaker4

      Actually I just turned it off so that it could properly cool down and the problem has gone away! The weather is warming up here, so it looks like overheating is something I need to become aware of.

      • Nov 14
  • New
    ReinhardKlamm
    Contributor - Level 2
    2021-08-31

    Hi folks

    I am now on the DP48 Trip using POE and this works fine. Now it would be great to get this POE Based Stagebox DL8. Any Information about this?

    0 15
    • ReinhardKlamm
      DavidKnighton Hello Reinhard,
      The product development is unknown at this time. I would check back periodically, as nearly all product releases are posted here in the community.
      • Aug 31
  • New
    kylegbenson
    Newcomer - Level 1
    2021-09-28

    I'm currently getting inconsistent performance on a couple of inputs on the DL16 Stage Box. Specifically, the overall gain levels drastically vary from week to week as it's used primarly on Sundays at church. To clarify, the parameters themselves don't vary, but rather I encounter significantly decreased input signal. I've ruled out mics and cables..i.e. input 1 causes trouble so I move it to input 9 and it's fine. Do you think a firmware update will solve this problem? My m32 console is current.

    read more...
    0 15
  • New
    manoaratefy
    Newcomer - Level 1
    2021-09-23

    Hello,

    I've found recently that the Behringer S16 can be used as standalone stagebox. But as the S16 have only 8 outputs, the 9-16 output coming from another S16 in the stage is routed to ADAT in the FOX S16, so I have to add a ADAT-analog converter in my setup to get these output.

    I'm wondering if SD8 can be used as same purpose, because SD8 has 8 in / 8 out, so with the same setup, I can hook up 2x SD8 on the stage and 2x SD8 in FOH.

    Or is there any another easy setup to make use of digital stagebox with analog mixers?

    read more...
    0 14
    • manoaratefy
      Nigel67 Hi manoaratefy. The S16 has the option of using its built in clock to connect to other IO boxes so a mixer is not required. The SD8 does not have a built in clock and therefore needs to receive an external clock from a mixer or S16 to work. Therefore, unfortunately you cannot use two SD8s as stand alone stage boxes as neither can provide a clock. You could connect an S16 to two SD8 giving you 16 inputs (S16) and then 16 outputs (2 x SD8).
      • Sep 22
  • New
    MiguelPires
    Newcomer - Level 1
    2021-09-03

    Hi.

    I bought a new XR18 to replace me XR16.

    I connected it to my Mac and loaded all my saved snapshots to the XR18. I also updated the firmware.

    When I turn the mixer on and connect my microphone an piano, no sound goes in the mixer. Nothing. I tried initializing but it didn't help.

    Anyone with the sme issues? How do I fix this?

    Thanks.

    read more...
    0 13
    • MiguelPires
      NicJonesMT Hi Miguel.
      Could you please provide a screen shot of the App so that we can see how you have the input and output signals routed, and also how you have the channel setup?
      From there we can then advise you further. It may also be worth submitting a technical support ticket and provide this information.
      • Sep 3
  • New
    SvenBurgis
    Newcomer - Level 1
    2021-10-21

    Hello,

    i really use many years Behringer Products, but in my and from sond engineers opinion e are missing new innovation. example Touch screen or optical connection between mixing and S16(Example). 

    So how your next innovation?? 

     

    Best Recards 

    Sven Burgis

    read more...
    0 12
    • SvenBurgis
      Dale_M Hi Sven I will pass your remarks over to the Behringer Design team, on a similar matter the new Midas HD96 has full touch screen.
      • Oct 21
    • SvenBurgis
      Paul_Vannatto The Behringer Wing also has a touch screen.
      • Oct 21
  • New
    jjfredrick
    Newcomer - Level 1
    2021-09-01

    Is it plossible to save mix presets on SD Cards.  I am an audio enginner at the church that has 20+ band members that rotate in an out of the band each week.  Our church recently upgraded to a Midas M32, DL32, Hub4, and DP48 personal mixers and it would be ideal to be able to save each of their DP48 mixes to an SD card that can then be loaded on whichever DP48 unit they might be using in a given week they are volunteering.

    Admittedly, I'm still getting up to speed on this system, so perhaps I have overlooked an easier solution, but welcome any insights and/or suggestions for managing this scenario.

    read more...
    0 10
    • jjfredrick
      Paul_Vannatto Hi Jeff, yes you can save mix presets to either the 12 internal memory or 12 preset files on the SD card. Press the Setup and SD Rec buttons simultaneously and a menu will come on the screen with Load, Save, Delete, Read, Write, etc.). Select the Write, then one of the 12 group buttons to save to the SD card. It will save a file in the DP48M folder, such as dp48_sd_pre_01.bin (last 2 digits will be preset number). Selecting the Read, then one of the group buttons to load the desired preset from the SD card.

      If you want to have specific presets affiliated to specific musicians, I would suggest you create individual folders on a hard drive named by the musicians' names and place the appropriate preset files in them. Unfortunately the files have to be named exactly as shown above, or the DP48 will not read them.
      • Sep 1
Go to page