Statistics

250,738 members
127,934 posts
  • DAP4920
    Contributor - Level 2
    2020-01-20

    I don't think I was clear in my last post: Actually I want to know how to control for example an equalizer using X Touch functions. Can someone help me? I am currently using DAW Reaper. Thanks.

    0 269
    • DAP4920
      KenMitchell

      Hi Siro ( @DAP4920 ), 


       


      Welcome to the community.  In Reaper, plugins are typically controlled with MIDI messages but the X-Touch isn't a MIDI controller, it uses MCU (Mackie) protocol.   If you are running Reaper on Windows, take a look at the Klinke MCU extension that has an FX Mode for editing FX parameters.  There's no Klinke for Mac.  In my previous setup, I used an X-Touch to control the track parameters and an X-Touch Mini (in MIDI mode) to control FX parameters.  This was on a Mac so no Klinke.  Since I adopted the single fader mixing method, I use a Presonus Faderport for tracks and a custom Lemur layout on an Android tablet for controlling FX parameters. 


       


      Hope this helps, 


      Ken

      • January 25, 2020
  • djsalo
    Newcomer - Level 1
    2020-10-27

    I have a bcd3000 controller.

    I bought a new laptop with windows 10.

    It isn´t possible to play with this windows.

    How can i solve this?

    0 208
  • New
    alessiolazz
    Newcomer - Level 1
    2020-12-05

    Hello everyone,

    I have a Behringer BCD2000 and I have to install on a Windows 10 64bit laptop.

    Now the BCD2000 drivers are for Windows Xp 32 bit.

    Do you know where I can find BCD2000 drivers for 64 bit?

     

    0 186
    • alessiolazz
      john0121 Hi Alessio, apologies but the BCD2000 is supported to be compatible with 32 bit operating systems.
      • December 6, 2020
  • Adel
    Contributor - Level 2
    2020-05-23

    I install windiws 10x64 and my dj controll not working, because drivers not working in windows10. And windows not repair them. Where i can get drivers for behringer cmd studio 4a for windows 10x64. On official site of support only for win7.  Site of care did not work properly too, care ticket not working.

    cmdstudio4a.png
    read more...
    0 177
    • Adel
      RexBeckett

      @Adel 


      First make sure that every required field in your profile is correct. Missing or invalid information can apparently cause the Care ticket system to fail. It is also important to fill-in every required field in the Care ticket form (marked *). Make screenshots of the completed Care form before you submit it. If it fails again, send a PM to @AlexLane with the screenshots embedded (use the Photo button) and he will be able to help.


       


      BTW: It is not necessary to start a new thread each time. You can reply to your original thread.

      • May 23, 2020
    • Adel
      Adel

      i fill all required fields. screenshot. in file

      c4.png
      • May 23, 2020
    • Adel
      RexBeckett


      @Adel wrote:


      i fill all required fields. screenshot. in file





      @Adel 


      In case you did not send a PM to @AlexLane , this post will notify him.

      • May 23, 2020
  • WJSCHMARS
    Newcomer - Level 1
    2020-07-16
    So my wife bought me the CMD Studio 4a for our anniversary. I went to download the Decadance LE Software, but Cakewalk is no longer accepting new accounts, so I'm out of luck there. What can I get that's reasonably priced, since Virtual DJ costs more than the controller? I'm still new to this technology since I'm from the old school. Turntables & vinyl.
    read more...
    0 167
    • WJSCHMARS
      GERARD90 hola oye yo tengo el mismo problema ya lo solucionaste el mio lo conecto a mi pc y me aparece error en el controlador
      • July 28, 2020
  • New
    Blackisdark
    Newcomer - Level 1
    2021-01-08

    Thanks Nic-jones.

    Ok ,where to start , i just bought a td-3 analog bass line , and i try to connect with it , a korg volca kick and audio interface u-phoria umc 204hd and my td-3 .

    I try to make the lot to sync together on ableton  , but i can find the way to make  the sound of the td-3 come in out in my midi channel on ableton. maybe my plugin is wrong or else . maybe i have the wrong cable or maybe need a mixer . Some help woulb be welcome . thank you

    read more...
    0 151
    • Blackisdark
      dapaul You can use Midi out of TD-3 and connect to the Volca. Set both to different channels. Connect TD-3 via MIDI in or USB and set the sync setting in the midi setting for the td-3 in Ableton Live to send the midi clock. Then both units will start and respond to the clock.
      • Jan 21
    • Blackisdark
      Blackisdark ok , but after plugin , why the sound from td3 can't be lowered in ableton only from interface in put it down . knowing i can use my controller tto change volume.if someone could tell me how many cable and wich cable i need and a draft of how to plug them
      • Jan 27
    • Blackisdark
      NicJonesMT Hi Blackisdark, sorry for the delay but I have only just found this post!
      Did you manage to sort your issue?
      If not could you please submit a tech support ticket (Click support at the top of the page then scroll down to Tech Support). When you submit your ticket could you please provide a Video that shows exactly how you have all your devices connected and configured in Ableton. I can then advise you further and hopefully get you up and running!
      • Jan 28
      •  sync,plugin and connection td-3 , umc204hd and korg
        Blackisdark I cant load a video
        • Jan 29
      •  sync,plugin and connection td-3 , umc204hd and korg
        Blackisdark i can't upload a video.anyway , would be better if you make me a draft
        • Jan 29
      •  sync,plugin and connection td-3 , umc204hd and korg
        NicJonesMT Thanks for replying.
        Please submit a ticket above, and we can try and get this sorted for you.
        • Feb 2
  • sergio123
    Contributor - Level 1
    2019-10-28

    Hello, I´m Sergio Castan. I bought a CMD Studio 4a. But I can´t actívate the software Deckadance 2 LE because the site web Carewalk and Stanton New account creation is currently disabled. I waited a month to fix the web, but It continue the same.

    How can fix the problem?

    I tryed to write to Calwalk, but it´s necessary a account to send a messege.

    read more...
    0 140
  • RationalGuy
    Contributor - Level 1
    2020-01-11

    How do you turn off / disable / bypass the crossfader?

    If a channel is assigned to the A side and another channel is assigned to the B side, are the other channels blocked or passed through to the output section?

    What if only one side of the crossfader is assigned to a channel?

    What if the same channel is assigned to both sides?

    Where are these cases and behaviors specified?

    (User Manuals for all other Behringer mixers with crossfaders, also, do not specify these cases.)

    read more...
    0 134
  • Law89
    Newcomer - Level 1
    2020-08-22

    How do you sync a TD-3 with a DDM4000 via midi please. 

    0 133
    • Law89
      PedroRodrigues Hi Law89 please be aware that the MIDI implementation on the DDM4000 is limited and more focused to control DJ and sequence software but you ca try. Please see the pictures below with the DDM4000 MIDI implementation, I hope it helps
      • September 3, 2020
  • New
    snapian
    Newcomer - Level 1
    2021-02-16

    I am trying to register a new product but the drop down box for the product name does not work and as a result I cannot input the product number. Am I doing something wrong?

    0 133
    • snapian
      KyleJohnson Hello, Kyle here with Music Tribe. First, I'd recommend you clear your cache and cookies, and try a different web browser. If you continue to have issues, try submitting a different type of ticket like presales or tech support and put a note in that you are trying to register a product.
      • Feb 16
    • snapian
      snapian Thanks Kyle, Did as you suggest and tried a different browser but product name drop down still not working. Tried to submit a different ticket but drop down product box not working and it seems to be essential that it is completed.
      • Feb 17
      • Registration problem
        KyleJohnson It's working for me, so I imagine it's something to do with web browser/settings. Did you try clearing your cache/cookies in your browser? Are you registering on a Mobile device or a Desktop computer?
        • Feb 17
    • snapian
      snapian Using a desktop and two different browsers with no success. However, tried my Android tablet and everything worked. Every day is a school day! thanks for your input.
      • Feb 18
Go to page