Statistics

250,738 members
127,934 posts
  • New
    LebogangVThebyane
    Newcomer - Level 1
    2020-12-21

    Morning my name is Lebo and recently I was playing music went outside for a bit and when I came I noticed my mixer was off I tried using different power sources but it wouldn't turn back on. One thing I had noticed was it a bit hot but there was no smell of anything that might have burned. So my question is what could be the reason for this

    read more...
    0 67
  • New
    MishMich
    Newcomer - Level 1
    2021-04-22

    I'm trying to find info before purchase. I've been tasked with doing the music for a party, & decided to get a DJ TT with phono out to play popular music spanning 60 years from my record collection. I was going to leave it at that, but decided CD's would be good too, but don't want to invest in a DJ CD unit, and all my CD's (as well 78 rpm & audiohile LP's) are recorded to 16x44.1 or 24x48 flac files. I can only really access them through a Sony VAIO laptop running Linux Mint or a Raspberry Pi (with a DAC). It looks like the process of playback would be simplified by routing both through a mixer, and this looks like it might do the job. I can justify the purchase as part of a setup for making videos about recording & reprocessing pre-loved vinyl & shellac from prior to 1970.

    So, can anybody tell me if the DJX900USB will work with a flac files &/or a laptop running linux?

    I can hook the linux laptop up to a Native Instruments Audio Unit OK, and it appears to work fine for recording and replay (but the NI has no phono stage, and I'm trying to eliminate the need for a separate preamp, & make transitions smoother.

    I assume the phono input on the Behringer mixer implements the RIAA equalisation curve?

    I'm assuming the mixer coverts the analog signal into digital via a DAC, then outputs the digital signal to analog for line out? If so, I'd rather take the flac output direct via USB rather than using an external DAC to convert the files to analog line out on linus, then feed that into the line in on the mixer, avoiding two steps in the conversion process.

    What are the specs of the internal DACs & ADCs on the Mixer?

    If this unit isn't going to provide the functionality I need, is there an alternative?

    read more...
    0 64
    • MishMich
      DavidKnighton Hello MishMich,
      The documentation for the device says stereo IN/OUT at 48KHz. I imagine this will work fine with most computer applications. The one part that is concerning though is the lack of driver. Normally we put a driver for Windows OS. Mac OS never needs drivers, and likewise, LINUX probably doesn't either, but I am no LINUX expert here. Raspberry Pi I would not be certain about either. Most of our USB audio devices/interfaces operate using the same chipset, and that chipset is USB Class Compliant. We also use the generic ASIO4ALL driver for majority of our 2- track USB. Hope this information helps.
      • Apr 23
  • New
    Zigo
    Newcomer - Level 1
    2020-12-07

    Is there a document anywhere which details all the MIDI commands for the CMD PL-1?

    0 63
  • Imfone
    Newcomer - Level 1
    2020-10-04

    How reset this thing? I really hate this thing right now and wish I had bought the korg nubass instead. This site is the worst to maneuver and this company hands off approach to customer is the worst.

    0 60
  • New
    milli1369
    Newcomer - Level 1
    2021-02-22

    the display turn on but the letters or sing dont see any more

    0 56
    • milli1369
      Nigel67 Hi milli1369. We will need to get the unit in for repair. This can be done by clicking on the support tab at the top of the page. This will open a new window. Scroll down and click on the Service tab and submit a ticket. Many thanks
      • Feb 21
  • New
    Haz075
    Newcomer - Level 1
    2021-04-17

    One of the channels phono output volume  is very low. I need to have the master, the channels own volume and also the gain all on maximum. What could be causing this to happen?

    0 55
    • Haz075
      WilliamR Hello, Have you tried a different set of cables yet? If this does not solve the volume issue, please open a tech support ticket from the support link above and a specialist will get in touch with you ASAP.
      • Apr 18
  • New
    MilanPodolsky
    Newcomer - Level 1
    2021-08-08

    Vibration at bottom of speaker just one second is perfectly correct. It is ultra compact 500watt 8 channel portable pa sistem

    0 50
    • MilanPodolsky
      zurike Please I want to know how to use behringer x 2222usb mixer on my dawn fl studio I try to connect for recording it not working I also try to download the driver still not working Please I need explanation
      • Aug 8
  • New
    Maikmusik
    Newcomer - Level 1
    2021-05-31

    Hallo zusammen.
    Ich möchte gerne Schallplatten live während meiner Radiosendung abspielen. Angeschlossen habe ich meinen Dual DTJ301 USB an Port 11/12 am Mischpult.
    Gibt es eine Möglichkeit die Schallplatten auf den Stream zu bringen, ohne das Mikrofon auf "on" zu lassen? Ich sende mit dem Streamingprogramm Sam Broadcaster Pro Version 2021.2 und Windows 7

    Danke für eure Antworten

    Hello all.
    I would like to play records live during my radio show. I have my Dual DTJ301 USB connected to port 11/12 on the mixer.
    Is there any way to get the records to stream without leaving the mic on "on"? I am streaming with the streaming program Sam Broadcaster Pro version 2021.2 and Windows 7.

    Thanks for your answers

    read more...
    0 47
    • Maikmusik
      DavidKnighton Hello Maikmusik,
      With almost all of our small format analog mixers, the USB signal is sent from the MAIN L/R bus. Simply MUTE any channels you don't want in the mix during your live record show.
      • May 31
  • New
    ChristopherHolness
    Newcomer - Level 1
    2021-05-14

    I stream,  or should I say I used to stream using OBS, technics1200s and a Numark USB200 mixer.  I then upgraded my equipment and bought a DDM4000 which has no USB.  I've now brought a MIDI interface but being the non expert that I am,  I can't seem to get the set up right.  I simply want to get OBS recognising the turntables.  It recognises the MIC, so I must be doing something wrong with the cables.  Anyone who knows the equipment,  any Ideas on whats needed for the connection??

    read more...
    0 35
  • New
    GioKarto
    Contributor - Level 1
    2021-08-19

    Best friends,
    I have a CMD STUDIO 2A and it is not responding. all my control buttons have 1 color (orange). what can i do to have the factory setting. and the 2nd problem is that the software of that controller is not working with my "CMD STUDIO 2A" controller, what could be wrong. please your help

    read more...
    0 14
    • GioKarto
      Dale_M Hi there we’re sorry for your experience, please submit a Technical ticket from the Support tab above so we can assist you.
      • Aug 19
Go to page