Statistics

260,696 members
139,320 posts
  • dhpasta
    Newcomer - Level 1
    2020-10-08

    Can G5 head be used without speaker cabinet plugged in at all?

    Can I put it on my desk, connect emulated output to my interface and use it safely? Without damaging the power amp? Is the only condition to leave "standby" lever switched off?

    Same, can I unplug cabinet, switch off "standby" and connect effects loop "send" to my interface and use my own cab sims?

    In owner manual there is information about "silent operation" with headphones, but it is not said if I can safely unplug speaker cabinet.

    read more...
    0 507
    • dhpasta
      ChrisEdwards1 Hi Jakub, Yes, it is possible to do this. you can choose between a 1 x 12 or 4 x 12 emulation when being used with headphones, alternatively, you can use this to directly patch to a mixing console/audio interface for live or studio applications and treat it as a DI track to further add effects or amp sims. This output will both work with the amp fully powered or left in standby.
      • October 8, 2020
      • Bugera G5 Infinium - Can it be used without speaker?
        dhpasta Ok, thanks for answer. Beside that can I use effects loop send as a DI track without IR when real cabinet is unplugged from the amp?
        • October 8, 2020
      • Bugera G5 Infinium - Can it be used without speaker?
        dhpasta In general, my point is: Can I use the amp without speaker?
        • October 8, 2020
    • dhpasta
      ChrisEdwards1 Hi Jakub, it is best to use the emulated output if you wish to send a DI track to some recording software, and yes the amp can be used via the emulated output without a cabinet connected.
      • October 8, 2020
      • Bugera G5 Infinium - Can it be used without speaker?
        dhpasta Now it's clear. Thank You!
        • 1
        • ·
        • October 9, 2020
  • crystal
    Contributor - Level 3
    2020-01-01

    Hi folks in this community, and hi to the forum admins!

    I'd like to know the power in watts of the Bugera BXD15A. I'm looking for a specification of the power after RMS signal measuring, and not the peak power. The peak power is declared to be 1000 watt.

    Furthermore, can somebody provide me with infos about the acoustic pressure (Kennschalldruck)?

    Thanks in advance,
    crystal

    read more...
    0 408
    • crystal
      Paul_Vannatto

      Hi Christian @crystal 


      Welcome to the forum. Is there a particular need for these specs? If you are looking for a guitar amp that will blow dry the audience, please reconsider your needs. Far too often, I have to ask new guitarists to turn their amps down (or else) during soundcheck. Usually their response is that they have to have it loud enough in order to get the tone they are looking for. But many of the pros are now using amps with mcuh lower peak wattage, but with amazing quality (and the audience and sound engineer is much happier with).


       

      • January 1, 2020
    • crystal
      crystal

      Hi Paul,


      thank you for your helpful answer. Of course you're right reflecting these concerns. I guess that I'm rather careful with such matters, but sometimes my band collegues complain about my bass being not loud enough.


      It's true, I want to compare bass combos with each another. My reason is to know not only the quality, which is surely excellent with the Bugeras. But to be able to compare the possible power and loudness when playing along with my collegues. We are definitely not up to fill great music halls, but pubs or open-air stages with perhaps about 50 people of audience.


      I should be happy with good quality and sound, but beeing able to regulate down the master control, cool as a cucumber.

      • January 1, 2020
    • crystal
      Paul_Vannatto

      Hi Christian @crystal 


      With the bass, the reason why your collegues may be complaining that they can't hear your bass is due to their proximity to the amp and the wavelength of the bass notes you play. For example low E is 41Hz which has a wavelength of 27.4 feet. If they are standing/sitting any closer than that, the sound level will likely be less and they could actually be located in a dead spot (due to reflection from a small room). Quite frequently the bass player is standing 5 feet in front of his amp (which is pointed at his knee caps) and typically turns it up, because he says he can't hear - which in turn is far too loud at the audience position. No level of power can fix this. Sorry.


       

      • January 1, 2020
    • crystal
      crystal

      This is very helpful advice to me, thank you. I feel that your thoughts must be true, for I hear such seemingly irregular sounds and loudnesses when we practice in our studio.

      • January 1, 2020
    • crystal
      Paul_Vannatto


      @crystal wrote:


      This is very helpful advice to me, thank you. I feel that your thoughts must be true, for I hear such seemingly irregular sounds and loudnesses when we practice in our studio.





      You are most welcome. If I find one of the posts that explained it to me enough to understand the scenario I will post it here for you. It has been awhile since I last read them. So it may take awhile to find them.


       


      If you have one of those wireless guitar adapters, walk away from the amp about 30 feet and have a listen.


       

      • January 1, 2020
  • CJ1988
    Contributor - Level 1
    2019-05-18

    Hello, I purchased a Bugera 6262 Infinium guitar amp head from Adorama Camera. It was shipped to me and arrived when they said it would. Upon plugging everything in the first time I found the lead channel to be very faint and almost completely inaudible. The clean/crunch channels work great but I am not paying for an amp that only halfway works.

     

    Now, that being said: I contacted the dealer and was told to get in contact with Bugera as Bugera would send me a retube set. I called the support number and got an automated voice directing me here, which is completely ridiculous. Human interaction is needed for some cases, even in today's tech savvy society. 

     

    I have an email out to support and figured I'd post here, any help is greatly appreciated!

    read more...
    0 308
    • CJ1988
      2112eric

      Hey my name is eric. Register your amp serial number and all and bugera will pay for amp to be serviced in maryland usa for free.you have to go thru process you have a 2 year warrenty

      • June 7, 2019
  • jspooner
    Contributor - Level 2
    2019-12-17

    I've emailed they responded to my email and they give me the sum number and tell me the call me back within 1 business day and I have not had one any calls I need the same fixed it's four months old it's something to do with the effects loop. Can somebody please help me out

    read more...
    0 265
  • GeorgeKlongland
    Newcomer - Level 1
    2020-09-29

    I bought the foot switch specified on the back of the amp and the connector is different.

    The amp has a big connector and the foot switch has a small connector.

    The part number is the exact part number called for. 

    So is there a replacement connector that I can wire in ? Or and adapter ?

    read more...
    0 199
    • GeorgeKlongland
      GeorgeKlongland
      • September 28, 2020
    • GeorgeKlongland
      GeorgeKlongland
      • September 28, 2020
    • GeorgeKlongland
      john0121 Sorry for the problem you've encountered here, can you please submit a technical support case via the "Support" button at the top of the page and we can get this looked into/resolved.
      • September 28, 2020
    • GeorgeKlongland
      GeorgeKlongland Can someone, anyone just get me a wiring diagram for the connector for the footswitch on the back of a 6262 infinium?
      • October 15, 2020
    • GeorgeKlongland
      GeorgeKlongland Can someone, anyone get me a wiring diagram for the footswitch connector on a 6262 infinium? I bought a new 5 pin din cable and need to know which pin is which to wire it .
      • October 15, 2020
      • Bugera 6262 Infinium
        JMaxfield77583 Google is your friend Bro! All of the Bugera schematics (except for the TriRec or the Magician - which never saw production) can be found online.
        • October 22, 2020
  • brodromal
    Contributor - Level 2
    2020-02-12

    Hello!

    I'm a newbie, so my question may seem stupid, but

    There is the only one tube replacement light on Bugera V5 Infinium. So wich tube it is associated with: 12AX7 in preamp, or EL84 in output? In other words, which tube should I replace when the light lit?

    read more...
    0 184
    • brodromal
      brodromal

      Am I right in thinkin that this super popular forum is the only one form of technical support of Bugera? Well, bravo 

      bugerats.png
      • March 2, 2020
    • brodromal
      RexBeckett


      @brodromal wrote:


      Am I right in thinkin that this super popular forum is the only one form of technical support of Bugera? Well, bravo 





      @brodromal 


      Hello Roman, no that is not the case. This is a user forum and, while some of our experienced members can often help to solve problems, we are not the only way to get technical support for Music Tribe products.


       


      You can request technical support through the Care ticket system. Click on Support at the top of this page and then click Create a Care ticket. This is only possible if you have completed all required fields in your profile. Also make sure to fill-in all the required fields in the Care form. Keep an eye on your email spam folder - some members have missed responses from the Care team when they ended-up there.

      • March 2, 2020
  • pbman1953
    Contributor - Level 1
    2019-12-29

    HI

     

    I'm a new user to the 1001T. The manual doens't give much as far as real uasge and set up. I have a couple questions-

     

    Has anyone changed tubes and was it worth it to change?

    Please explain your set up relationship between the gain knob,volume and master.

    I've played for many years but I'm a novice to compression. Please send me some basic settings to try and if possible please explain how it works. 

     

    Thanks

    Rich

     

     

     

     

    read more...
    0 176
    • pbman1953
      jspooner

      I have a trirec. I'm not sure what a bugera 1001t is never heard of it. Mines in the shop right now so I really can't tell you anything besides I'm pissed off about it

      • December 29, 2019
  • SteveWeid
    Contributor - Level 1
    2019-07-09

    Why is so hard to find a BT210TS 2x10 bass cabinet?

    0 170
  • Georg-Enders
    Contributor - Level 1
    2020-01-23

    Hello out there,

    i am living in Germany and want to by a Bugera 112TS but it is not available by all dealers with Mus!c Tribe products. Is it possible that anyone can tel me when it is available again ?

    Thanks for answes and with kind regards

    read more...
    0 167
  • Pengstrom5
    Newcomer - Level 1
    2020-05-29

    Hi Everyone - 

    I'm looking for a replacement  Bugera FSB104 Footswitch (5-pin) for my 333 head. I've tried to create a Care ticket, byt the Musictribe system will not let me enter anything in the model field, and thus the ticket is unsendable. Can anyone point me in the right direction? This support system is very "messed up" for me at the moment. 

    Thanks,

    Phil

    8850706038814.png
    read more...
    0 163
Go to page