Statistics

298,889 members
182,569 posts
  • New
    kountrykid
    Newcomer - Level 1
    2021-11-04

    Hello,

    As mentioned in the subject line, I'm trying to connect the brackets that came with my Klark Teknik DW20BR, so it can be mounted.  Though, the screws provided are too long after removing the black rubber feet that are originally mounted.  And, it doesn’t come with any shorter screws. Trying to figure out what I’m missing here? Thinking maybe I’m missing a step.

     

    Tony

    702-523-0126

    read more...
    0 15
    • kountrykid
      Nigel67 Hi kountrykid. It appears that you are doing everything correctly. The screws that you take out to remove the rubber feet should then screw straight back in. They screw back into an extruded aluminium case which should have threads made into it long enough for the screws to be tightened into. There is no pcb, etc in the way that they can be fouling on. The screws should be 15mm long. Can you confirm that they are this long? Either they are too long in the first place or the aluminium extrusion has not been threaded deep enough. I don't want you to force it, but can you try putting a little extra pressure on one of the screws to see if it tightens up any further. If not, then I would advise contacting the partner that you purchased the unit from and asking them for a replacement unit, making sure that they check the replacement unit so the screws do go all the way in when the rubber feet are removed. Have you checked all 8 screws? Many thanks
      • November 5, 2021
  • New
    Davpis
    Newcomer - Level 1
    2021-11-23

    When will these be available again? I've been waiting over a year with Sweetwater it's backordered

     

    thanks

    0 14
  • New
    trentperkins
    Newcomer - Level 2
    2022-02-11

    Greetings!  I recently had an installation where the network was changed from one IP network to another.  3 out of 4 DM TCEs easily adapted and found the new network automatically.  A fourth has reverted back to 169.254.whatever, and I have no idea how to get it back to the network everything else is on.  I cannot find it in DM Kontrol, even if I rescan for devices.  Any help?

    As I am at the job site and really want this to be finished, a quick response would be amazing!

     

    read more...
    0 13
  • New
    specialism
    Newcomer - Level 1
    2022-05-30

    Hi, is there any chance we will see reissues or successor models of the classic DN780 Digital Reverberator and DN50 Spring Reverb rack units in the near future (component shortages aside)?



    It would be great to see a reprising and reinvention of some of Klark Teknik's own past work in addition to the current line up. I think you would see market interest in both of those units, and possibly the equalizers also. Keeping to the same physical dimensions of the current KT rack products also makes them more desirable for desktop and smaller studio setups.

     

    I don't use Facebook so it would be great if this was forwarded to someone in Klark Teknik directly.

    read more...
    0 12
    • specialism
      Dale_M Many thanks for the remarks, I will pass them over to the KT team but unsure if there is any thoughts to revisit any of these.
      • May 30
    • specialism
      specialism Thanks Dale, I was thinking more of building upon those designs rather than a straight reissuing as such. Given almost everyone in studio production at any level uses reverb, it's surprising KT aren't producing a high quality rack reverb already. Especially given there is history of them - and they have produced effects for Behringer synthesizers.The DN780 and DN50 are both well regarded, so I think modern revisions would do well. The spring reverb especially with analogue studios.
      • May 30
  • New
    r222
    Newcomer - Level 1
    2022-03-03

    dose anyone know what the 2 small silver stick strips are for

    0 12
  • New
    kien
    Newcomer - Level 1
    2022-03-11

    Hi Folks,

    I am looking for a new DN370, if you have it please share.

    My mail: [email protected]

    Thanks in advance.

    Kien 

    0 12
  • New
    Birdt22
    Newcomer - Level 1
    2022-07-26

    Hi

    We have a problem with our Helix system controller. We have been trying so solve a problem with a fold back speaker and explored all aspects of the sound system. We noticed that the screen on the controller was showing gobbledygook and the unit was very warm. We turned it off but now there is clearly a fault and the screen flashes and there is a hi frequency clicking sound.

    Has any one had a similar experience? Has the power unit failed or is it something more sinister?

    read more...
    0 10
    • Birdt22
      Nigel67 Hi Birdt22. This could be a number of things, one of them being the switchmode power supply. These units are getting quite old now and there is a good chance that the electrolytic capacitors in the psu have dried out. You will need an electronic technician to open the unit and measure the psu voltages and then identify where the clicking is coming from - possibly being caused by a voltage being bad.
      • Jul 28
  • New
    KlausZimmermann
    Contributor - Level 1
    2022-04-08
    good afternoon,
     
    what's the latest fw and how to update?
    what tcpip settings are recommended?
    can this be done via a midas pro series desk? which one?
     
    tx?
     
    read more...
    0 10
  • New
    ChristianS1
    Newcomer - Level 1
    2022-04-25

    Hey there,

    I am looking for a DN9630 available in Germany, if you know where to get it please share, seems like no one has it in stock...

    My e-mail: [email protected]

    Thanks in advance.

    Best regards, Chris

    0 8
  • New
    gfosdick
    Newcomer - Level 1
    2022-04-08

    Hi Klark teknik support and others,

    I hope all is well.

     

    The klark teknik multi-fx processor board apprears to be malfunctioning in my kxd15 keyboard amp.

    Is it possible to purchase a klark teknik multi-fx replacement board?

     

    Thanks, George 


    View Attachment
    read more...
    0 5
    • gfosdick
      ChrisEdwards1 Hi gfosdick, if not yet done so please submit a parts request. This can be done by going to the Support tab at the top of this page and scrolling down/filling out the parts form.
      • Apr 8
Go to page