Statistics

260,008 members
138,464 posts
  • V61Church
    Newcomer - Level 2
    2020-10-02

    Hey guys, I am trying to set a limiter on the Main Out of my XR18 to boost my stream broadcast mix and protect it from clipping. The only limiter FX on the XR18 is the 'Precision Limiter' which doesn't have a threshold to set. Does anyone know how this Precision Limiter works? Also, the GR meter doesn't engage on the Xair iPad app.

     

    Are there any ways around this FX Plug in or anything I can do to have a make-shift Limiter on the XR18?

     

    Feedback to Behringer on the XR18 - could you add another standard Limiter plugin on the XR18?

    read more...
    0 547
    • V61Church
      RexBeckett The Precision Limiter does work in a strange way. I generally use the in-bus compressor. This has all the controls you would expect on a compressor/limiter.
      • October 2, 2020
  • Raggydoll
    Newcomer - Level 1
    2020-07-01
    I have filled in a ticket completely for registering my 76 KT. When I click on register nothing happens.
    0 166
    • Raggydoll
      Dale_M Have you received any email confirmation or a ticket number?
      • July 1, 2020
    • Raggydoll
      Greene Can I register a product on the mobile app?
      • September 20, 2020
  • Rafa78
    Newcomer - Level 1
    2020-10-12

    Hello, how can I update the firmware of the wizard series finalizer plus.

    0 147
  • New
    RichardPenrose
    Contributor - Level 2
    2020-11-13

    Hi,

     

    I have a KT-2a and am wondering what the small Stereo Link trim pot does? I am mainly using the KT-2a for tracking and am wondering what it should be set to?

     

     

    0 146
    • RichardPenrose
      KyleJohnson Hi Richard, Kyle here with Music Tribe. The 2A-KT units can be Stereo linked via a TRS cable so that you can use a pair of them. The Trim is there so that if you see inconsistencies on the gain reduction meters between the 2 units you can correct them with the Trim.
      • November 13, 2020
    • RichardPenrose
      RichardPenrose Hi Kyle. Thanks for the info. Where should the stereo link trim be set when using a single KT-2a for tracking?
      • November 14, 2020
      • Klark Teknik KT-2a - Stereo link trim?
        KyleJohnson Thank you for your patience. Keep it at the Default/0 setting when using a single unit.
        • November 16, 2020
  • lewiszielsdorf
    Newcomer - Level 1
    2020-08-04

    Is this tech support?

    0 145
    • lewiszielsdorf
      Paul_Vannatto No this is the forum. If you need tech support, select Support above and submit a support ticket.
      • August 3, 2020
  • New
    AudioForge
    Newcomer - Level 1
    2021-01-13

    Hi KT team, I've followed a previous post from before Xmas and contacted suppliers re availability of a pair of 2As in a bundle I need.

    Thomann replied with "sold out and not expecting any more". Please can you advise if 2A has been discontinued, I'm ready to order a pair of 2As, a pair of 76s and a dimension.

    richy

    read more...
    0 122
    • AudioForge
      PedroRodrigues Hi Audioforge, please be aware that I can confirm that the units are not discontinued, in regard of availability I would advise you to contact another reseller to request that information about these product as we do not have access to information of third party company that distribute our products. Thank you
      • Jan 14
      • KT2A / 2AKT
        AudioForge Great news, thank you
        • 1
        • ·
        • Jan 14
  • New
    CarolinaJones
    Newcomer - Level 1
    2021-04-13

    Hello ..

    So somehow today, I manged to trash my Finalizer 96K (V 3.5). I think it was by accidentily removing the SRAM Card while it was live .. Boo!!!

    Can someone please tell me if the appropriate software is available to download, so I can restore it to normal - I have an old laptop with PCMCIA and a 512K SRAM card.

    Thank-you, thank-you - Any help would be appreciated!

    Carolina :-)

    read more...
    0 116
    • CarolinaJones
      PedroRodrigues Hi CarolinaJones please consider that to be able to assist you on this matter please follow the link below : https://wsi.li/dl/SGZqPMjRd3aGaShwz/ Thank you
      • Apr 14
      • Finalizer 96K lost its software/firmware
        CarolinaJones That's wonderful! - Thank-you! :-)
        • Apr 14
    • CarolinaJones
      CarolinaJones

      I guess I'm still struggling - I have dug out my old Sony Laptop, put the SRAM card in the PCMCIA and installed the Generic, Windows driver. A drive letter of F: pops up but the file system is shown as raw .. Please tell me how to get the WIZ file to the SRAM Card ... I'm completely useless at this! :-(

      • Apr 14
    • CarolinaJones
      CarolinaJones
      • Apr 14
    • CarolinaJones
      CarolinaJones UPDATE: Using an evaluation version of CardWare, I have successfully erased the card and dumped the data from the WIZ file to the raw SRAM .. I'm guessing this is good .. :-) Bad news, my Finalizer says,, "Option: Start" and "Press ENTER to select" .. I can't see an Enter, only the OK button .. I'm struggling - Maybe it's just dead ... Boo! ... Any other advice so, so appreciated! Thanks!
      • Apr 14
      • Finalizer 96K lost its software/firmware
        CarolinaJones Is it possible to buy or rent a card with the firmware on it, ready to go? I'm concerned I'll spend a bunch of money and my Finalizer is just broken.
        • 1
        • ·
        • Apr 15
      • Finalizer 96K lost its software/firmware
        PedroRodrigues Hi CarolinaJones unfortunately we do not have any service available that provides cards to our customer. Thank you
        • Apr 16
  • MikeMicMNR
    Newcomer - Level 1
    2020-09-28

    I purchased the 76-kt a few months ago. It's completely unusable due to the loud audio hiss. I was going to literally throw it away but then I thought of contacting you guys for help. I did create a ticket for technical support about a week ago but have yet to receive any reply whatsoever. The unit I have is completely useless. I mean just turning it on creates the most awful audio hiss. The higher the output, the worse the noise gets. I've tried everything from feeding it a hot input to avoid turning up the output level, to going through a gate to supress the noise but nothing seems to help at all because the hiss is very loud and can be heard behind the vocals or whatever I'm trying to compress. Any help?

     

    Thanks in advance. 

    read more...
    0 116
    • MikeMicMNR
      Nigel67 Hi Miguel. This is definitely not right and we need to get your unit in for repair. What was the ticket number for the case you submitted and I will check where it is in the queue. I am surprised that nobody answered it as we do normally clear the queues within 24 hours. Let me know the case number and we can go from there.
      • September 27, 2020
      • 76-KT (audio hiss)
        MikeMicMNR Thank you in advance Mr. Turner. This was the ticket number I was given: Ticket Number: CAS-141048-L2V5F9
        • 1
        • ·
        • September 27, 2020
      • 76-KT (audio hiss)
        Nigel67 Hi Miguel. I have found your case. I have asked the guys in Vegas to take a look at it when they get in and reply to you.
        • September 28, 2020
    • MikeMicMNR
      kherje Yes i have almost the same problem, but when i run a hot signal in, i get really good results, but the output has to be all the way down, if i go past 48 on the output, the hiss gets louder and louder, rediciously loud if you push it, no matter what the input level is, Even with no input connected so basically: you cant touch the output knob without it hetting really noisy, I guess i should return it? Other than that: tried it on bass, and the sound i Get with hot input is just midblowing, if it wasnt for the output problem this would be one of my favorite studio devices
      • Nov 13
  • New
    ZachMalinowski
    Newcomer - Level 1
    2021-02-12

    Trying to wrap my head around how to use the compressor section on the DCX2496. I understand it's intended to be used for ducking & de-essing. But has anyone figured out how to use it as an overall "mix-bus" so to speak? If I left the EQ flat and engaged the compressor, would that work?

    read more...
    0 108
    • ZachMalinowski
      DavidKnighton Hello Zach,
      are you asking how to use compression in general or how best to use it with the actual product? Compression is generally used to the audio peaks down while lifting the soft audio. Ducking is a type of compression that pulls the audio down when another source is playing. Example, a bingo hall wants to play music, but they also need to announce. The announce mic will trigger the ducker to lower the music so the announce is more prevalent in the mix. If you want to just use a compressed audio, then it's possible to do so, just don't engage any of the other elements, such as EQ, Crossover functions, etc.
      • Feb 12
      • Compressor Section on DCX2496
        ZachMalinowski Sorry I'm just getting back. I understand how Dynamic EQ works. I just want to use this function as a compressor. I've attached photos on how 's currently set up--- Basically have a low shelf that I pulled to to -7dB. Then I have the threshold at -15dB, ration at 6:1. In theory, since I didn't pick out specific frequency bands, It technically should act as a basic compressor, yes? I am using the limiters, but I wanted some compression to glue the low end together, and didn't want the limiters to have to brick-wall everything.
        • Feb 25
  • New
    WillBilliams
    Newcomer - Level 1
    2021-01-16

    I was recently made aware of the bypass on the 76-KT, and was wondering if the KA-2A has an option?

     

    0 105
Go to page