Statistics

235,556 members
111,326 posts
  • FelipeDeJesusCepeda
    Newcomer - Level 1
    2020-10-12

    Hola, tengo el VLX3 pero no se como actualizar su firmware, su version es: 2.2.00 BUILD 366, agradeceria mucho que me puedan ayudar... Gracias

    0 87
  • Gerdski
    Newcomer - Level 1
    2020-07-03
    Hello, I can set a lot of levels in this nice machine, but I haven't found out yet where I adjust the overall voulme level for the complete Preset/Patch. Where is this setting? Yes, I have read the manual :-)
    0 83
    • Gerdski
      kiskadar69 There does not seem to be such a parameter. What is your original problem?
      • July 3, 2020
      • How to set Preset Level in Voicelive 3 Extreme
        Gerdski My original Problem is that I want to set the Presets evenly to avoid volume differences in live performance.
        • July 4, 2020
    • Gerdski
      kiskadar69 I think you need to come up with a workaround.
      • July 4, 2020
      • How to set Preset Level in Voicelive 3 Extreme
        kiskadar69 ..or ask TC-Helicon to include this parameter in the next VoiceLive 3 firmware version.
        • July 4, 2020
    • Gerdski
      FabioValdez in the main screen, turn one of the knobs under the screen and you will get in the level options.
      • July 4, 2020
    • Gerdski
      Gerdski Will try that, thanks!
      • July 5, 2020
  • whydavewhy
    Newcomer - Level 1
    2020-07-08
    Can the VoiceLive Rack be used in a mixing board’s Effects Loop to double vocals on multiple channels? (So the mics would be in different channels of the board, with varied send amounts on each channel, going to the VoiceLive Rack. Then the Lead Mute would be turned OFF on the unit. (Or does that only affect the lead vocal when a mic is plugged in directly to the VoiceLive Rack?)
    read more...
    0 80
    • whydavewhy
      kiskadar69 Would only the Double effect be turned on in the VoiceLive Rack? I think it would work. Lead Mute should be turned On.
      • July 9, 2020
    • whydavewhy
      Francois43912 I would love to learn if it is possible to get an inbound stereo signal into that loop?
      • July 23, 2020
    • whydavewhy
      kiskadar69 @Paul Francois: IMO it isn't possible. The mixers first mix the stereo channels into mono and send them to the mixer's Aux output. The TC-Helicon VoiceLive Rack also has a mono input.
      • July 24, 2020
  • New
    Mircode1
    Newcomer - Level 1
    2021-01-22

    Hi,

    I bought my Voicelivetouch2 in 2016, never register it. I tried on the platform but I can't.

    This is the invoice 


    View Attachment
    read more...
    0 74
    • Mircode1
      Dale_M Hi Mircode can you give me your name and email? I will see if I can help you manually.
      • Jan 22
    • Mircode1
      Mircode1 [email protected] Biancavilla Mirella, but I bought also some instruments with my company (Behringer Neutron and I had the same problem, someone registered for me).
      • Jan 25
    • Mircode1
      Dale_M I have sent you an email and resolved this (please check your inbox/junk) also if you have any more to register please reply.
      • Jan 25
  • New
    TCH-Rob
    Triber Contributor
    2021-04-15

    Hi friends! We are very excited to anounce GoXLR update 1.3.130.

     

     Features:

    Color Wheel

    • Allows for unlimited choices to fully customize the look of your GoXLR.
    • Recently selected colors are saved to make setting up your color profile faster and easier.

    Cough Mute

    • Cough Mute now has its own dedicated mute options.
    • Mute behavior can be set to Hold or Toggle modes.
    • Mic no longer needs to be assigned to a dedicated fader, thus freeing up a fader to mix another audio source.

    Line Out fader

    • The line out level can now be controlled by the application and can be assigned to a physical fader.

    System Tray / Minimized on Startup

    • GoXLR app can now be set to be hidden in Windows System Tray on startup.

    Quality of Life Improvements and Bug Fixes

    • Double click an individual band on the EQ to reset gain to 0dB.
    • Reset button now also resets EQ bands to a gain of 0dB.
    • Right-click on device component in app to enter the lighting tab for that component. A left-click will bring you to the settings tab for that component.
      Mic, Chat and Music are now select-able on all channels for Mini.
    • Global settings now contains a checkbox to select whether muting Voice Chat also mutes your Mic channel.
    • Headphone and Lineout should now properly display audio passing when set to meter mode.
    • Profile mute mode and EQ settings now load correctly on start-up.
    • With Line Out or Headphones as the channel source, Mute to All is the only select-able option.
    • Adjusting the mid and high EQ bands on Mini in basic and advanced modes did not have reliable behaviour. This has been corrected but this may have changed your profile EQ settings slightly.
    • Better error checking on updates.
    read more...
    1 71
  • RennySchweiger
    Newcomer - Level 1
    2020-08-23

    I created a Preset (call it #2) to be used as a Step 2/2 on Preset #1. (It was originally a copy of Preset #1 and I made significant Harmony and other settings to it.) I have successfully copied #2 as a step to #1 and all is well. I can also edit and save changes to Step 2/2 in Preset #1. And because I made changes to Step 2/2 in Preset #1 as I was tweaking, it is now a bit different from Preset #2. So Preset #1 with my two Steps is all set. 

    Here's the question: Can I safely delete Preset #2 (not that it is no longer needed) without affecting Step 2/2 in Preset #1?  I'm afraid to try! I don't want to mess up my Step 2/2 I worked so hard on.... 

    Thanks in advance to anyone who can help. 

    read more...
    0 62
    • RennySchweiger
      PedroRodrigues Hi Renny Schweiger, yes you can, the factory presets are stored permanently within the device, even if you've overwritten them with custom presets. The custom presets are stored in a different location and applied "over" the factory presets when you save them.

      When you delete a factory, or custom preset, leaving the space "blank" within VoiceSupport, the unit automatically re-populates that spot with the factory preset.
      You can also use Mix Knob 4 to select the Preset number where the current Preset will be stored.
      If you want to save the Preset where it currently is, do not change this value.
      If you would like to save the Preset to another location, change “Store To” to another number.
      The name of the selected Preset slot will be displayed in the upper part of the screen.
      Using Store To is handy when you would like to make several Presets with similar sounds.
      You can create a “master” Preset and store it so a few different locations using Store To.
      You can then edit those copies further if you wish.
      • August 24, 2020
    • RennySchweiger
      RennySchweiger Thanks for the reply Pedro. My apologies for not being more clear, but you missed the essence of the question. I only used the generic names Preset "#1" and "#2" to mean two presets in general. I my specific case they are both user presets, not factory presets.
      • August 24, 2020
    • RennySchweiger
      RennySchweiger The question still stands -- if I create a (new user) preset (B) and copy it AS A STEP to another user preset (A), can I delete the preset (B) used for the step? Will the preset (A) now with two steps in it remain intact if I overwrite or delete the user preset (B)?
      • August 24, 2020
    • RennySchweiger
      PedroRodrigues Hi Renny Schweiger ,please be aware that on the VL3x copying a preset, whether its to a new user preset or a step in another preset it does not retain any ties to the old preset. It does not act like an alias. So modifying the original will not change the new preset/step.
      • August 25, 2020
    • RennySchweiger
      RennySchweiger Thanks Pedro, it worked. I deleted the no-longer-needed user preset and the Preset with the Step is still intact. Also FYI thsi is on my VL3 (i.e., not a VL3x).
      • August 26, 2020
  • New
    hamanohashi
    Newcomer - Level 1
    2021-02-25

    Hello

    Does someone have the vyzor editor for TC Helicon VoiceWorks excecutable/setup for windows ? 

    Impossible to find it as all website are down now : 

    psicraft =down

    tc helicon = redirect to psicraft

     

    thank you !

    read more...
    0 56
    • hamanohashi
      PedroRodrigues Hi hamanohashi, Please consider that this software and the unit you are refering to are legacy but I was able to find it, follow the link below to access VYZOR https://wsi.li/dl/XvihQuHjKh76RakWC/ Thank you
      • Feb 28
      • Vyzor editor for TC Helicon VoiceWorks
        hamanohashi PedroRodrigues many thanks ! I will try it thank you so much !
        • 1
        • ·
        • Mar 1
      • Vyzor editor for TC Helicon VoiceWorks
        hamanohashi Tried and it does not work ... looks like it support only TC Electronic not TC Helicon If someone have the good excexutable thank you
        • Mar 12
    • hamanohashi
      JohndeWitt Still looking for that Vyzor editor for my TC VoiceWorks (not plus). Can anyone share the executable? Many, many thanks in advance!!
      • Mon at 2:50 AM
  • New
    cwest
    Newcomer - Level 1
    2021-02-15

    Hi. Does anyone know why I cannot adjust my amp gain on certain presets. Global is off. Cheers 

    0 54
    • cwest
      PetGerbil 'cos you've got the "drive" pedal engaged ? (it replaces the gain section on the amp)
      • Feb 15
      • Vl3x amp gain
        cwest Thanks PetGerbil. That’s it. Cheers
        • Feb 15
  • BRymes
    Contributor - Level 2
    2020-07-07
    I'm learning to play Rage Against The Machine's "Killing In The Name Of", and I need to set up a phaser effect for the intro. I assume its in the uMOD parameters but I feel like I'm going in circles to attain a decent sound. Here's a link to Tom Marello discussing the intro part at 20:33. https://youtu.be/aJXzY9vhqZg I would appreciate any help that you can give me. Thank you.
    read more...
    0 52
  • New
    JeremyGorman
    Contributor - Level 1
    2021-03-16
    Ok...here's a question for you.
    I want to have the metronome sound on any preset that I have a loop assigned to. That's the easy part.
     
    The hard part (so far) is getting the metronome to shut off when I switch to a preset that doesn't have a loop assigned to it. It stays on the previous presets loop, hence the metronome is still going.
     
    I can get around this by creating an empty loop with the metronome off and assign it to that preset, but this seems a bit silly and wasteful of a whole loop slot.
     
    I've been all through the manual, but so far no luck. What am I missing?
     
    Thanks as always!
    Jeremy
    read more...
    0 46
    • JeremyGorman
      PedroRodrigues Hi JeremyGorman I presume you are referring to the VoiceLive 3 Extreme right, if you are please Keep in mind that tempo/metronome settings are saved with each Loop. Accordingly, triggering a Loop using a remapped footswitch will invoke these settings therefore the metronome will still be active. What I might suggest is based on your suggestion of having an empty loop you can try to see if works by If you set the Met Follows Playback parameter to ON, the Metronome will mute and unmute automatically whenever the Loop is playing, this will prevent the metronome from continuing after you press STOP and might not work on a empty loop. On another point I would also advise you to check the metronome sub-menu on page 138 of the manual that may offer a few more options that may help you achieve your creative intents. To access the product page where we have the manual available please follow the link below https://www.tc-helicon.com/tchelicon/product?modelCode=P0DEG Thank you
      • Mar 16
      • Metronome question
        JeremyGorman Hi Pedro....first, thanks for responding! So no, I have the VoiceLive 3, not the Extreme and the issue is I need the metronome on for the entire time I am playing the song. That way I know I'm maintaining the tempo when the loop isn't playing, so the 'Met Follows Playback' feature won't work for me. What I'm hoping to accomplish is to have the metronome stop when I call up a preset that doesn't have an assigned loop. All of my presets that do have loops are fine, it's the ones that don't that are the issue. Any suggestions for that? Right now I have assigned an empty loop to those, to have the metronome off, but that means wasting an entire loop slot. Thanks!
        • 1
        • ·
        • Mar 16
      • Metronome question
        PedroRodrigues Hi JeremyGorman please consider that if you are running the last FW available for the VL3 the implementation is exactly the same between both unit. Unfortunately there are some limitation when it comes to the Metronome implementation. I would suggest to follow the link below to confirm on the manual for your unit if any other implementation ight work for your. Please follow the link below : https://www.tc-helicon.com/tchelicon/product?modelCode=P0DEG
        • Mar 17
Go to page