Statistics

306,019 members
190,365 posts
  • New
    dnfaudio1
    Newcomer - Level 1
    2022-11-30

    Good day can I use the MR18 Remote mixer with the DL16 stage box?

    0 10
    • dnfaudio1
      Paul_Vannatto No, the MR18 does not have AES50 ports, which the DL16 requires. You would need to get an X32, M32 or Wing.
      • Wed at 9:03 AM
      • MR18 And DL16?
        dnfaudio1 Thank you so very much for the info.
        • Wed at 9:06 AM
  • New
    RolandFantom
    Contributor - Level 2
    2022-11-30

    Hi. What's the latest firmware and how can I update if necessary?

     

    Is the switch 6 compatible with the Voicelive Play?

     

    Thanks 

    0 8
    • RolandFantom
      kiskadar69 I do not know the latest firmware version of VoiceLive Play (blue). You can upgrade with VoiceSupport 2:
      https://www.tc-helicon.com/product.html?modelCode=P0CMP

      1. VoiceLive Play (=blue): not compatible with Switch-6.
      2. VoiceLive Play GTX (=white): not compatible with Switch-6.
      3. Play Acoustic (=black): compatible with Switch-6 (if you cannot select Switch-6 in the menu, a firmware update is required).
      4. Play Electric (=grey): compatible with Switch-6 (if you cannot select Switch-6 in the menu, a firmware update is required).
      • Wed at 10:31 AM
  • New
    pietervannes
    Newcomer - Level 1
    2022-11-30

    Hi! I'm using a Clarity M for a while now, but never through USB, it always works fine. I now need to use it through USB, so I installed the plugin, and found out that I would need to update the firmware. Problem is: my mac (Mac Mini 2014 - OS Big Sur 11.6) can't find the Clarity in Finder. I have set it to USB disk drive. So no way to update firmware, right?

    When I want to connect the plugin, I set my Clarity M to Plug-in mode, but it says "Clarity M not available" on the plugin and "not connected" on the Clarity M. 

    Am I doing something wrong? 

    Thanks and best wishes, Pieter

    read more...
    0 4
  • New
    arczi79
    Newcomer - Level 1
    2022-11-30

    Hi! 

    I posted my question in a few different places... but so far I didn't get answer.

    Crave manual: https://mediadl.musictribe.com/media/PLM/data/docs/P0DPX/CRAVE_QSG_WW.pdf

    page 43:
    Caution: Do not overload the 3.5 mm inputs. They can only accept the correct level of voltages as shown in the specification tables.

    page 71:
    all inputs accepts -5V to 5V
    one output gives 0V to 8V - it is ENV output

    Does it mean that the ENV output can demage Crave?

    read more...
    0 6
  • New
    Moof81
    Newcomer - Level 1
    2022-11-30

    Hey folks,

    We have just bought a Behringer X32 Compact to work with our Blackmagic Design ATEM Constellation over USB/Midi using the Daw interface.

    It seems to work really well and has the great feel and tactile control we wanted but the only issue is no names are displayed on the scribble strip for each channel. To cycle banks it just says Bank > or Bank < so there is no way of knowing what channel you are actually fading.

    I presume it's lacking the channel information being sent over the Midi protocol from the ATEM but I wondered if anyone knew of a way that we could name them on the scribble strip? 

    I can see it's straightforward to name a regular channel but not so much for Daw/MIDI Channels.

    As we have 40+ channels to mix, the old electrical tape hack isn't going to cut it this time I'm afraid. ☹️

    TIA

    C

    read more...
    0 6
    • Moof81
      Paul_Vannatto The easiest way to label the scribble strips (name, icon) is use X32-Edit (for Windows, Mac, linux, Raspberry Pi) connected to the X32 via ethernet/wifi. Simply right click on the scribble strip and type in the name and choose the color. On the console itself, go to the Setup, Scribble Strip screen.

      If you want the ATEM to send scribble strip data via MIDI, the only way to do that is via sysex - if the ATEM has that capability. If it does, the easiest way to create the sysex strings is by using SysexOscGen app found here
      https://sourceforge.net/projects/sysexoscgen/
      • Wed at 6:27 AM
  • New
    Prestasonofwi
    Newcomer - Level 2
    2022-11-29

    Hello,

     

    I would like to know if the production of Turbosound TLX-84 will resume in this way with the TFM series.
    read more...
    0 2
  • New
    Snowdog2
    Newcomer - Level 1
    2022-11-29

    I would like to be able to use my TC Helicon Harmony GXT for busking, so I need to power it by battery.  I understand that I need 300ma+, 12v and a negative center, but I am having difficulty determining what will work for a battery (power bank).  Has anyone had any success with this (or failures i would learn from)?  I don't need to power any other pedals.  I am concerned that stepping up a 5 volt power supply to 12 volts may not provide consistent power or might be noisy. Thanks

    read more...
    0 2
  • New
    jamesryall
    Newcomer - Level 1
    2022-11-29

    All of a sudden my Audio Interface (Xenyx 802) is not outputting any Phantom power? I have tried Turning off the interface, Unplugging it and putting into a different socket but it is still not working? Has anyone else ever had this problem or knows how to fix it please?

    read more...
    0 10
  • New
    JayWilcherSr
    Newcomer - Level 1
    2022-11-29

    Where can I get help finding a part?

    0 4
  • New
    Celtic1888
    Newcomer - Level 1
    2022-11-29

    I have a behringer XENYX QX2442USB and I want to connect to my new macbook pro which only has thunderbolt connection is there a specific cable ???

    0 4
Go to page