Statistics

298,813 members
182,478 posts
  • New
    amarcinkowski
    Newcomer - Level 1
    2022-09-23

    Hi there,

    Looking to do the following.

    I have a Midas M32R with a DL16 and a Biamp Tesira DSP. What I'd like to do is take an input from the DL16 route it to the console via AES50, convert it to Dante, send it to the DSP to be processed and then back to the console for live application use. 

    I'm messing around with various routing but I'm wondering what's the most efficient way of doing this.

    Please advise.

    read more...
    0 6
    • amarcinkowski
      GaryHiggins Does the Tesira have Dante? Looked like it does not from a quick search. Your M32 also has a Dante Card installed? I don't think Dante will help much unless both units are able to use Dante. I know nothing about the Texira though so I could be wrong.
      • Mon at 3:41 AM
    • amarcinkowski
      amarcinkowski

      • Mon at 7:08 AM
    • amarcinkowski
      amarcinkowski

      Hi Gary, I installed a Dante card in the board and the Tesira is Dante capable

      • Mon at 7:09 AM
  • New
    slomogoget
    Newcomer - Level 2
    2022-09-23

    Hello,

    I finally manage to find a DN32 card to implement Dante on my X32 (firmware 4.06).

    I've search quite a bit on the web and still haven't find a solution. I would like to pass Midi thru the Dante network between my laptop and the console. I acknowledge that it is possible to do it between 2 computers with rtp midi but I haven't find any solution between the mac and the X32. Am I missing something ?

    read more...
    0 5
    • slomogoget
      Paul_Vannatto The X32 does not support RTP Midi. As well, the X32 Midi implementation is designed to control the console (on a limited capability) only.
      • Sep 23
    • slomogoget
      slomogoget

      Thanks Paul. It's just that I was able to send program change and Midi CC from Live to the console with my old Xusb card. I'm really amazed that it is not possible thru a Dante network. Guess I have to use usb/midi cable then. Cheers

      • Sep 24
  • New
    raylallana
    Newcomer - Level 1
    2022-09-23

    Hey, everyone.

    Is finalizer.com down?

    Also the 'Play' button is greyed out in the Finalizer Desktop App.

    Thanks in advance,

    Ray

    0 5
    • raylallana
      raylallana Just checked again...
      • Sep 23
    • raylallana
      raylallana 12PM PST
      • Sep 23
    • raylallana
      raylallana 1:40 PM PST
      • Sep 23
    • raylallana
      PedroRodrigues Hi raylallana, thank you for your post, I believe the server in under maintenance, regarding the issue you have described about the the 'Play' button is greyed, please send me your ILOK USERNAME via DM so I can check if everything is operating correctly. I hope this helps Thank you
      • Sep 24
  • New
    chutney30th
    Newcomer - Level 1
    2022-09-23

    Hello I am very new to using pedals! So please please take into consideration I may sound super simple. 

    I have the original TC helicon voice live touch. 

    I am going on tour soon so just brought one of these. My voice is super auto tuned in my songs so I thought hard tune would be perfect, except I can't seem to find where I can set hard tune to a specefic kEy. 

    however I did find specific keys in harmony. But it doesn't seem to work with the hard tune as maybe the specific key is just for when you using harmony's.

    does anyone know how to help, please please explain things to me as dumb as u can. 

    best 

     

    and thank you 

    read more...
    1 34
    • chutney30th
      Mastrofm Can someone please tell me what ipad mini will download the Xair app to work with the Xair16? I download the app but it does not recognize the xair. Thank you in advance.
      • Sep 23
      • TC helicon voice live touch (1)
        PedroRodrigues Hi Mastrofm, for any questions please make a post and do not request information as a reply to someone else's post. More please bear in mind that you are requesting information for a Behringer unit on the TC HELIOCN page. Please post your question on the Behringer page. Thank you
        • Sep 24
    • chutney30th
      PedroRodrigues Hi chutney30th, thank you for your post, please ponder that you can enter a key and scale when you a) know the key of the song you are singing and b) have a pitch reference to sing along with such as an instrument or mixed music. Choose a preset such as #3: Tuned Up + Down to hear the effects.

      To enter the Harmony key and scale of your song:

      1. Hold the Harmony button to enter its edit menu.
      2. Press the arrow buttons until you locate the Key: menu.
      3. Slide along the Slider to choose the key.
      4. Tap the right arrow to enter the Scale: menu.
      5. Slide to choose a Major scale e.g. M1, M2, M3 or a minor scale e.g. m1, m2, m3.Try each scale for best fit with your music.

      Now, sing the song with your accompaniment. By default, the key and scale you set will remain in effect for all harmony presets.
      If you prefer to save different keys for presets, turn the Key/Scale Gbl parameter in the Setup menu to Off.

      Please note that regarding Custom scales: Scale customization is not possible in Touch.

      Some presets ported from VoiceLive 2, e.g. those with “Drone” in the name, will show Cu for scale.

      This indicates the scale is custom, though it cannot be edited further in VoiceLive Touch. I hope this clarifies this matter. Thank you
      • Sep 24
  • New
    nekopoiapk
    Newcomer - Level 1
    2022-09-23

    Saat ini, banyak orang menggunakan WhatsApp untuk berbagi video, foto, audio, dan banyak lagi. Jika Anda ingin menggunakan WhatsApp dengan beberapa fitur tambahan, maka GB WhatsApp APK tersedia untuk diunduh dan diinstal di perangkat Anda.

     
    read more...
    0 0
  • New
    Hutchball
    Contributor - Level 1
    2022-09-23

    Hi, is there a setting so that the harmoniser only activates when the pedal is depressed? (non latching)

    1 2
    • Hutchball
      kiskadar69 I don't think there is such a setting on H1. Maybe TC-Helicon will include it in a future firmware version.
      You can use the non-latching mode with these, for example:
      - TC-Helicon Harmony Singer (cons: fixed scales cannot be selected)
      - TC-Helicon Harmony Singer 2 (cons: fixed scales cannot be selected, pros: power input 9VDC =pedalboard friendly)
      - TC-Helicon VoiceLive Play plus Switch-3
      - TC-Helicon VoiceLive Play GTX plus Switch-3
      - TC-Helicon Play Acoustic plus Switch-3
      - TC-Helicon Play Electric plus Switch-3

      If you want to use the H1 anyway, here's a workaround:
      Step 1. Set the DRY/WET potentiometer of the H1 to full WET. This way only the harmony will appear on the XLR output. The H1 harmony function should always be On.
      Step 2. Plug your mic into some kind of splitter (active splitter, or a small mixer). The original vocal will be on one of the outputs of the splitter.
      Step 3. Connect the other output of the splitter to the XLR input of the H1, and enable this connection with a momentary switch.
      • Sep 23
  • New
    Noctxm
    Newcomer - Level 1
    2022-09-23

    It's not the first mixer I've had to have this exact issue, I've tried a basic ground loop isolator, an iFi iDefender and plugging it in to other sockets/usb ports. The clip has the audio with just power/USB cable and no XLR and then with an XLR cable later in the clip. I've been trying to fix this for almost 2 weeks with no progress. 

    read more...
    0 3
  • New
    Hutchball
    Contributor - Level 1
    2022-09-22

    Hi. Does the TC Helicon Voicelive H1 have a setting where you have to hold down the foot switch for the harmony to activate?

     

    thanks. 

    0 3
  • New
    squarejer
    Newcomer - Level 1
    2022-09-22

    I have an x32 mixer and just found a Roland S-1608 Digital Snake I'd like to use.  How do I get the x32 to receive REAC?

    0 0
  • New
    schizotronic
    Newcomer - Level 1
    2022-09-22

    That's it. After a decade of perfect service, it happened.

    Really sorry for bringing this one back after several years. The BOOST button simply fell off.
    Since there is no "parameter" to setup at this very one, unit still works great.

    I remember years and years ago, people talking about this issue, but I REALLY can't find it anywhere. A TC forum, where I believe my salvation is, isn't working anymore. I also remember something about a "C" clip os something.
    Please, any help would be great.

    (Inside the button cavity, I can see the PC board and it seems there is a loose wire. Is it supposed to be attached to the button assembly?). 

    read more...
    0 8
    • schizotronic
      WilliamR Please click on the support link above and create a tech support case. On of our agents can get you sorted ASAP.
      • Sep 22
Go to page