Statistics

249,452 members
126,460 posts
  • New
    BFAN111
    Newcomer - Level 1
    2021-09-13

    I added another amp and wanted to change my EP2500 to bridge mode operation from stereo.

    It seems like it will not allow me to run it in Bridge mode without enabling the Low frequency filter?

    Is this correct?  I cannot use an EP2500 in bridge mode to power a subwoofer without a low frequency filter?

    read more...
    0 1
    • BFAN111
      DavidKnighton Hello BFAN111,
      No, that is not correct operation of bridge mode. According to the manual, you need only push switch 6 & 7 to the ON position to enable bridge mode. Also note that parallel mode must NOT be active, so switches 4 & 5 must be in the OFF position. The remaining switches/controls for INPUT 1 are optional. The manual does state that the the INPUT 1 options are used specifically for bridge mode operation, meaning INPUT 2 controls are N/A. This statement does not mean that the controls need to be engaged for bridge mode.
      • Mon at 3:51 PM
    • BFAN111
      DavidKnighton
      • Mon at 3:52 PM
  • New
    Soundwright
    Newcomer - Level 1
    2021-09-13

    Hi,

    I have spent $600 on the TC native plugins 24hr ago and haven't received download links or activation codes. Yes I've checked my spam.

    I am unable to lodge a ticket because none of the forms are relevant and the mandatory dropdown boxes prevent me from filling out a ticket.

    Furthermore, I was never given an "order number" as described in the FAQ, so apparently I don't even have the info needed to lodge one.

    I require private communication with someone from support who I can send my PayPal receipt to rather than publicly posting private details.

    I have no idea what is going on here, but this is completely unacceptable given that even the smallest plug-in companies manage timely and stress free delivery of their digital products.

    read more...
    0 4
  • New
    rossilive
    Newcomer - Level 1
    2021-09-13

    Hello,

     

    For Studio use, I'm trying to route the channel Solo monitor output to the main out, not on a separate Monitor out as it is configured. When I hit the solo button, I want to hear only that channel out of my Mains.

     

    Thanks in Advance!

    read more...
    0 0
    • rossilive
      Paul_Vannatto Assign the Monitor L & R to a couple of user outs (on the Routing, User Out screen, last 2 assignables in the Aux group), then assign those User Outs to the respective outputs (eg. AES50 A, B, XLR Out, etc.) that you have your speakers connected to.
      • Mon at 10:06 AM
      • M32 Console - Solo channel to Main out Routing.
        rossilive Tried like this, didnt seem to work. I'll try again and send images if not... Thanks!
        • Tue at 11:17 AM
  • New
    T3aztec
    Newcomer - Level 1
    2021-09-13

    I switched from VLX3 extreme to an acoustic play.  The AUX output used to be on the vocal side of the XLR output.  On this acoustic play I have it set for vocal and guitar and it seems the AUX output is on the guitar side. Anyway to switch that?  I want to keep it Vocal on one channel and guitar on the other. But would like AUX to be on the vocal side 

    read more...
    0 17
    • T3aztec
      PedroRodrigues Hi T3aztec please take in to account that you must use the Output parameter to set how signals are sent over the XLR outputs of Play Acoustic.

      The unit offers several parameters that you can set up on the output stage such as:

      1)-The Vocal/Guitar (DI) setting, with this setting, vocal and Aux signals are sent over one XLR connector, and guitar signals over the other XLR.

      2)- With the Stereo setting, a stereo mix of Vocal, Guitar and Aux signals is sent over both XLR outputs

      3)-With the Mono Setting all effected vocal and guitar sounds are sent via the left XLR output.
      Dry vocals, with Tone and pitch correction, if you have set the Pitch Cor Amt parameter on the Input page to a value other than zero, are sent via the right XLR output.

      The unit also offers on the outputs stage tools such as the Vocal cancelation function and the Lead Mute parameter.
      The first tool that attempts to remove the vocals from a piece of music while the second tool mutes the lead vocal and only output the processed signals.

      1)- With the Off setting/ On setting
      When it’s on “Off set mode” no processing is performed on the Aux input signal.
      When it’s on “On setting mode”, Play Acoustic will attempt to remove lead vocals from a piece of music.
      This will create “Karaoke” style music for you to sing along to, including key information for harmony generation.

      2)- With the Off setting/ On setting
      When the Lead Mute parameter has the “Off setting” activated Lead Vocals are routed to the main mix.
      When the Lead Mute parameter has the “On setting” activated Lead vocals are removed from the main mix.

      I hope this clarifies the options you have available to configure your unit and how you must set it up to reflect your creative intentions.
      For a more in-depth information on how to set up your unit please follow the link below to access the full guide and all the resources available for your PLAY ACOUSTIC.

      https://www.tc-helicon.com/tchelicon/product?modelCode=P0DEF
      • Tue at 1:03 AM
  • New
    Mina123
    Newcomer - Level 1
    2021-09-13

    I have a 19" rack, for the Mixer to sit on, I require the ears to connect to the mixer (Xenyx 1604), would somebody point me to the correct Ears? A link would be wonderful. Thank you

    0 2
    • Mina123
      DavidKnighton Hello Mina123,
      It appears the UFX1604 does not have a rackmount option. With most of our rackmount mixers, we generally supply the rack ears and screws, however this product does not list rack ears as an included accessory. Additionally, the mixer is 17 inches with the end caps on. Removing the end caps would narrow the width to about 15 inches, which is not the nominal rack width. You would need a custom built set of rack ears.
      • Mon at 4:04 PM
      • Behringer Xenyx  UFX1604 Rack Ears for 19"
        Mina123 Thank you for responding, yes I think I either try and build it myself or use two existing rack ears on each side without compromising the strength needed.
        • Wed at 11:24 PM
  • New
    jamallen44
    Newcomer - Level 2
    2021-09-13

    I have a Behringer monitor2usb controller and am having some issue lately I’m sure it’s not a problem with this controller but I have a question. Does audio pass from my pc into my Behrenger monitor 2 usb controller thtough usb or do I need analog cables going to my interface

    i have a Yamaha TF Rack I use as a pa mixer/interface This is connected to my pc by usb2 The monitor controller is connected to pc by usb of course. Connected to monitor controller is Behringer sub with a pair of monitor speakers and 1 mono cube speaker. 
    im able to record tracks into cubase with Yamaha but I can't hear them when using Yamaha soundcard and can't hear anything with headphones out of Yamaha aux mix to overdub

    i do get audio when I switch over to a different soundcard which leads me to believe it is a setting within the tf rack

    thank you,

    Jeff

    read more...
    0 5
    • jamallen44
      NicJonesMT Hi Jeff.
      Yes it would go from your computer via USB.

      If possible could you please click support at the top of the page and submit a technical; support ticket. From there we can go through some trouble shooting with you.
      • Tue at 4:13 AM
    • jamallen44
      Jacktunes Great work
      • Tue at 12:23 PM
    • jamallen44
      Jacktunes Please I need u-phoria um2 driver
      • Tue at 12:24 PM
  • New
    OPANOS
    Newcomer - Level 1
    2021-09-13

    Hello guys :) I love voicelive 3 but it’s been a while that l m waiting for an upgrade , so here is the question …is VOICELIVE 4 coming out soon?

    0 3
    • OPANOS
      PedroRodrigues Hi OPANOS please consider that at this moment we cannot provide any information on this matter, please keep an eye on our social media for any news on new units. Thank you
      • Tue at 12:57 AM
    • OPANOS
      OPANOS What about this? ?
      • Wed at 1:24 PM
  • New
    ID73
    Newcomer - Level 1
    2021-09-13

    Hi community,

    I want so get a monitor signal from my DI out, and therefore make a cable with XLR to Jack connector. 

    Can I bridge Pin 1&3 safely or will it do any harm to my amp (TC BQ500 bass head)?

    Thanks in advance!

    ID73

    read more...
    0 2
    • ID73
      PedroRodrigues Hi ID73 Considering what you are trying to achieve regarding monitoring your signal I would suggest to use the XLR output on the BQ500 to connect it to a device that offers monitoring such as sound card with a XLR input using a D.I. Regarding the asymmetric signal that you referred can you please provide more information on what you are referring to.
      • Tue at 12:34 AM
  • New
    jffry101
    Newcomer - Level 1
    2021-09-13

    Is it possible to save different profiles, where the levels persist between the different profiles? As in, say the mic level is moved to 75%, and when I move to a different profile, to keep that number. Ideally, I'd only alter the fader setup/lighting, not any of the other options. 

    read more...
    0 5
    • jffry101
      PedroRodrigues Hi jffry101 Please consider that any profile you create will be able to store all the settings you need,how you require for any particular tasks. You will not be bale to share the MIC level between profiles but you must set up the same MIC level on each profile.
      • Tue at 12:52 AM
  • New
    hiwatter
    Newcomer - Level 1
    2021-09-13

    Hi, my company purchased MD4 HD NATIVE in august. but didn't receive business invoice ever since. How can I get an invoice of the purchase?

    0 5
    • hiwatter
      KyleJohnson Hello, Kyle here with Music Tribe. Please contact our support team by clicking on Support and filling out a ticket.
      • Mon at 7:41 AM
      • invoice
        hiwatter Hello, could you provide me a direct link, please. I cannot find anything related to invoicing under the subcathegories (Product Registration, Technical Support, Service, Pre Sales, Parts, Downloads, Warranty Terms & Conditions, Ticket Viewer)
        • Tue at 5:13 AM
Go to page