hello,

my deepmind 6 is producing a high pitched consistent noise around the 12khz range and I'm not sure how to fix it. Its not a grounding problem, I updated the firmware, and I calibrated everything.

thanks,

Aaron

Hello,

Has anyone else tried custom TonePrints for X5 that utilize LoCut and/or LoShlv?

LoCut and LoShlv have little to no effect on the SubnUp slot in X5. 

I made a TonePrint for the SubnUp pedal with a LoShlv that cuts out input to the octaver below 450Hz with a 12/db slope. Screenshot attached. I do this so that the bass register of my extended range guitar does not generate any octave effects. As I get into the midrange register, the sub and up is added to thicken and brighten the tone. This works very well. The tone/timbre thickens seamlessly and requires no pedal dancing as I move through various registers. 

On the X5, lower register notes always generate octave signals so the tone is too thick for my taste. I need a standard dry bass tone in the bass register.

I tested HiCut -- HiCut works as expected in X5. I am running firmware 1.1.52.

Hello,

I keep having issues using my goxlr.  apparently when I talk to my teammates in Call of Duty Warzone they keep hearing an echo on their end.  checked my settings on my goxlr routing and disabled audio devices in windows but i still get an echo.  I've checked youtube and goole and still no resolution.  I've attached my settings below.  Any suggestions would be greatly appreciated.  Thanks!

Hi all

My question is how to set up my Q502USB mixer to record both a voice on channel 1 and a guitar on channel 2 and using Garageband or audacity.

My second problem is the phones are giving me audio only for one channel even If I have a stereo jack plugged in, see photo attached

I tried youtube videos but not working for me, I get in one channel my voice which is ok but in the other channel my voice and guitar together

thanks in advance for detailed instructions and help

Greetings!

first of all BIG thank you to Alexander Lane for his previous answer!

I Went Through manual 5 Times and dont GET IT ... and I'm still a roookie :)

Lab gruppen C20:8X has vpl Settings... Which one to ure for regular 8ohms speakers and not 100v speakers? 45 V (out of 100, 63, 45 and 32 V setting)?

thank you very much!

best regards form Slovenia!

Miha

Hi guys!

I have a problem with the g sytem (2010) after an update to 4.05, means that only burning flash is shown on the display and no longer works. I can no longer connect to the g system with the Vyzor Software.

Does anyone know the problem or has a solution to it?

thanks in advance for your feedback & metal greetings greg

Hey, noob wants to know best starting path for reducing vocal feedback.  Does this make sense:  balanced TRS output from pre send jack outputs of the yamie > to the input of the BFD then output from that back into the unbalanced LINE mono phone jacks of channel 5 and 6 selecting the aux buttons so that they go to the monitor feed of the yamie?  OK to use TRS plugs bringing them back to the mixer, which mono inputs are unbalanced?