249,489 members
126,499 posts
  • New
    Newcomer - Level 1

     i just got an x32 digital mixing console, which works perfectly well but the only challenge i have is my usb records only 30sec, i have change the usb stick but does that, any idea about what is causing that please

    0 14
    • Oscarbass10
      RexBeckett Hi Oscarbass10, this problem is often caused by unsuitable USB sticks. The stick should be maximum 32GB, USB 2.0 and formatted as FAT32. On an Apple PC, format as MS-Dos FAT32.

      Some makes of USB sticks seem to be more reliable. I use SanDisk Ultra Fit 32GB USB 2.0.
      • Sep 9
  • New
    TC Electronic
    Triber Moderator

    The new ultimate plug-in bundle with 20 pristine TC sound machines for music and film editing, mixing, and mastering.

    The Studio Elite Collection includes our award-winning plug-ins straight from the legendary TC Electronic SYSTEM 6000, TC Legacy Catalog, Midas Consoles, and more. Some of them are even available for DAW-based productions for the first time!

    From USD 2499 down to only USD 1299 - we've made the price just as awesome as the contents!


    • If you already own the Icon Series Legacy Native Bundle, you can get it for only USD 1049!

    • Already using the System 6000 Native Bundle? Then the Studio Elite Collection will be available to you for only USD 799.

    • “One more thing,” we hear you ask, “what if I have both?” We got you! Those who have both bundles can get the upgrade for just USD 499!

    All the professional production and mastering algorithms in the Studio Elite Collection integrate smoothly with all major music and film editing, mixing, and mastering applications. To grab it right now, and check out other great plug-ins, visit our store:

    This amazing bundle comes with:           

    • TC 2290 NATIVE
    • DVR 250 NATIVE
    • TC 8210 NATIVE
    • TC 1210 NATIVE
    • PEQ 3000 NATIVE
    • DYN 3000 NATIVE
    • LM2 NATIVE
    • MD3 NATIVE
    0 1,368
  • New
    TC Electronic
    Triber Moderator

    New super affordable prices for our ICON Series controller and stand-alone plug-ins. 


    The ICON Series hardware controller gives you legendary Midas EQ and dynamics, MASTER X, BRICKWALL, reverb, and delay effects directly at your fingertips. 


    Starting today, the pricing of all our ground-breaking studio controllers and hardware has been reduced! 


    Build your own affordable custom studio set up with our ICON DOCK. Each controller comes bundled with a plug-in and can easily slot into any setup. Mix and match to create your own unique space! 


    Check out the new lowest possible prices: 

    The MASTER X hardware, now $199! 
    The TC 2290 hardware, only $179!! 
    The DYN 3000 software at $89!!! 


    Plus, many more huge savings! 

    Not always got space for more gear in your studio? Well, the bundled plug-ins from your controller can now be used stand-alone. Enjoy our fantastic effects at lower prices anywhere you go. 


    Check out our store for the latest software deals or your local dealer for hardware controllers and plug-in bundles and see the latest lower prices!  

    PS: Remember to utilize your new double activations for your plug-ins and take your work on the road. 

    0 347
  • New
    TC Electronic
    Triber Moderator

    Double the Fun!
    We are thrilled to announce that we are doubling our license activations for TC Electronic native plug-ins. For all current and future users! For free!

    This means you can have multiple workstations using your TC Plug-ins at the same time.

    From today all your current plug-in licence activations have been doubled.

    Activate them now and enjoy your new freedom. No need to move your iLok between multiple setups anymore.
    The updated licences are ready and waiting in your iLok Manager. Open it now and see for yourself.

    Not only are we giving you free activations on your current plug-ins, but also on any future plug-ins you purchase! Check out our store to see what’s available:

    Increase your productivity, unlock your creativity and double the fun!

    0 1,208
  • New
    Newcomer - Level 1


    I recently started using the UMC22 to record guitar and bass into my computer. I use Garageband on my Mac.

    The input is extremely low. The recording volume is grayed out, so I can't change it. When I go into Sound Settings and it tells me that "THE SELECTED DEVIDE HAS NO INPUT CONTROLS" so I can't adjust the settings. I have to turn every single knob all the way up on my bass and the interface to get minimal sound recorded.

    I checked my cable, the battery in my amp, all possible configurations in GarageBand, created a new MIDI Aggregate Device, and no luck. 

    I have searched in many forums and I have tried everything I have found. 

    Any help is welcome.

    0 60
  • New
    Newcomer - Level 1

    Been banging my head on my desk TRYING to get this to work.
    I gave up :-(
    I am now reaching out to you . . .

    Here is what I am trying to do.

    Play music on the internet Using my mixer

    Control volume of music
    Control volume of XLR Microphone
    Kinda like a radio station, 

    we hear the DJ talking....he plays music....he talks as the music is playing

    The Music is coming from my PC
    I do not want to hold a microphone near a speaker, that would sound horrible. 

    Gosh is hard for me to express what I am trying to do,  but hope you understand.

    0 40
  • New
    Newcomer - Level 1

    Problem : I don't appear to be able to record a full 'waveform'. Recordings are clipping much earlier than it should when using the Behringer Audio interface

    info: I have an Audio Tehnica 2020 mic going into a U-Phoria UMC204HD going straight into my PC via USB, and into Audacity.


    When I was recording my waveforms weren't that large (or loud). I therefore decided to see what the maximum levels i could record to see how much headroom i was able to play with

    Test1 - Mic levels at 100% on the Behringer: PC record level at 100%, shouting into mic (maxed out/ hot/distortion to be expected)

    Result: Clipping and distortion occours at the 50% mark on the waveform - Image 1

    This makes me wonder my clipping wasn't happening at a much louder level? Should it not clip when the waveform is fatter/louder

    This makes me wonder why when I record normally, things are quiet. I don't appear to have the full headroom to play with. as clipping happens much sooner than expected.


    Test2 - used my BOSE headphone microphone, NOT going through the Uphoria, straight into Audacity - image 2

    Here I seem to have a much bigger dynamic range as the waveform is fatter and almost to the full.

    As this test was not going through my Behringer I am wondering if that is the problem


    The Behringer is only a couple of months old, and hardly used. Could anyone give me some ideas for further testing? or options, or could the Behringer be faulty


    0 60
    • kuztardd
      RexBeckett Hi kuztardd, the recording level in the UMC204HD driver may be set to less than 100% so the signal is being attenuated. You can adjust this through Windows Control Panel -> Sound -> Recording -> UMC204HD -> Properties -> Levels.

      You can also adjust the same level control through Audacity as long as the UMC204HD is selected as recording input. See attached screenshot. If you do not see the recording and playback faders, open View -> Toolbars and enable Mixer Toolbar.
      • Jun 22
    • kuztardd
      kuztardd HI rex thanks for taking the time to reply.
      MY settings there (and on the slider on Audacity are set to 100. So feel like the its Audio interface is limiting my output by 0.6db as my audacity records my bluetooth bose fully and that doesnt go via the Behringer?
      do you have any suggestions of any testing i can do before i think about doing a warranty swap with Behringer should i consider it faulty?
      • Jun 23
      • Why does my Behringer output at a quiet level?
        RexBeckett I know that the UMC204HD normally can output a full-scale USB recording level. If you want to be sure that your unit is defective, you could test with different sources and another PC. I have found that some issues are solved by disabling all enhancements on the Advanced or Enhancement tabs of the device properties.

        Other than that, I suggest a warranty return to either your supplier (if purchased less than 30 days ago) or through the Support menu at the top of this screen.
        • Jun 23
    • kuztardd

      Hey I found the fault! I installed my Behringer on another pc along with Audacity and noted that on the fresh PC that I could get full waveforms. The only difference I noted was that my pc 'Audio Host' was set to the default of MMC
      and the other pc was set to WINDOWS WASAPI

      It explains why the sound has always sounded pretty cack too. You can hear the difference here:

      • Jul 7
  • New
    Newcomer - Level 1

    Hi all. First time on this because I'm somewhat stumped.

    I work at a school and I want to start recording kids playing music/singing. I'm using a Behringer Xenyx X2222USB mixer plugged into a PC. My problem is I have one set of speakers and they are in the same room as the microphone recording, say, vocals. When I'm recording I have to turn the speaker's power off to they don't bleed into the mic. What I want to do is to be able to turn the sound off the speakers without having to essentially unplug them. I have Main Out, Sub Out and Control Room out. Is this even possible?


    0 76
    • rtravers
      RexBeckett Hi rtravers, I think it would be better to connect your monitor speakers to the Control Room outputs. That way you have some other ways to mute the speakers without affecting the USB recording feed. Options include:

      Turning down the Phones/Control Room level.

      Selecting 2-TR/USB as the Phones/Control Room Source. It also requires that the DAW/recording software does not have monitoring enabled. This method also has the benefit of allowing you to listen to playback when the recording session is finished.

      Selecting Sub 1-2 as the Phones/Control Room Source and ensuring that the Sub button is not pressed on any channel strip and also that the FX Return to Sub 1-2 button is not pressed.
      • Apr 14
    • rtravers

      • Apr 14
  • New
    Newcomer - Level 1

    Hello Team,
    I recently bought a Behringer FCA1616 and upon power up (via 12v AC adaptor) all the front panel lights slowly blink on and off in unison (including for any buttons currently pressed down).  Did I get a defective unit?  Or is there some sort of fix you are aware of?  This seems to be a common issue, reported on several forums, but no one has posted a solution yet.  What would my best steps be?

    Thanks so much in advance!

    1 124
    • andrei23
      DavidKnighton Hello andrei23,
      First, try to hold the device select button while applying power. This will change the unit between firewire and USB operation. If that doesn't resolve it, you may have a PSU problem. Double check the PSU is rated for your regional voltage (120 US or 240 EU). Beyond that, you may want to contact seller for exchange/refund.
      • Apr 8
    • andrei23
      spiceagent11 Please find attached my Curriculum Vitae, proposal and other supporting documents for your perusal and further necessary action.
      • Jul 4
  • New
    Newcomer - Level 1

    Nothin on my ilok

    Ilok name :tmatomas

    email: [email protected]


    Please Solve This

    1 54
    • Tmatomas
      Nigel67 Hi tmatomas, I have sent you a message on your other post. Please can you check your junk / spam folder and if there is nothing in there, please get back to me. I am sorry for the inconvenience
      • Apr 5
Go to page