254,799 members
132,533 posts
  • alphateknik
    Newcomer - Level 1

    I can't use mixer right now, if anyone knows the pro 1 bios password please help me to re-use the mixer,

    0 118
    • alphateknik
      alphateknik i need to fujitsu bios factory password,please help me,mixer doesn't work
      • September 21, 2020
    • alphateknik
      DavidKnighton Hello fatih küçük,
      To check on this issue, you'll need to open the fader panel and local the 5 pin header the sits between the two RAM slots on the motherboard. Ensure the jumper is shorting pins 1 and 2 just like the diagram shows.
      • September 21, 2020
  • WhiteBoyPt
    Newcomer - Level 1
    Hello Guys,
    I bought a new X-Touch. When I put all the faders up to 0db I got this difference (1 and 3).
    There is a way to fix/calibrate this? Thanks!
    0 68
    • WhiteBoyPt
      john0121 Hi, this is due to the fader tolerances. Could you please submit a tech support case via the support button at the top of the page and the team will be able to advise the options to get this resolved.
      • September 9, 2020
      • X-Touch - Fader Problems
        WhiteBoyPt Thank you!
        • September 10, 2020
  • Santyg08
    Newcomer - Level 1

    hola buenas!

    esta semana estuve actualizando la mesa y de golpe fallo la actualizacion 

    aun no puedo resolver el problema si alguno sabe como podria solucionarlo muchas gracias!!

    0 90
    • Santyg08
      KyleJohnson Hello, Kyle here with Music Tribe. You could try performing the update again using a different USB stick. If that does not work, please create a Support ticket by clicking the Support link at the top of the page. After you submit a ticket, one of our tech support agents can reach out for further troubleshooting.
      • September 8, 2020
  • Paulo1
    Welcome to our new Music Tribe community 2.0, I’m Paul O’Farrell-Stevens, leader of the Music Tribe Customer Branding team. 

 My highly-skilled team of Customer Branding Specialists are really looking forward too engaging, co-collaborating and co-developing new and exciting product content. We will be seeking new talent, fans and beta testers that want to join us to co-create inspiring customer-obsessed content. We Empower, You Create
    0 52
  • JohnMilner
    Super Contributor - Level 2



    Coming soon - iEQ Pro - which will allow Auto EQ of parametric EQs (as well as GEQs) in the M/X Air and M/X 32 series of consoles.  This App follows on from the other StrongSoft iEQ Apps, but will be able to Auto EQ the following consoles:  X Air, M Air, X32, M32 (and later, the WING).

    Demo video of Auto EQ to parametric EQ of an X Air console 

    0 3,273
    • JohnMilner

      This looks great John @JohnMilner. Glad to see that you are still active in supporting our beloved consoles with your apps.


      • March 4, 2020
    • JohnMilner

      iEQ Pro MX is now available in the App Store.  iEQ Pro Ultimate Bundle is pending approval - this is a means of upgrading from your existing iEQ App to a bundle which includes all the iEQ Apps - at a very reasonable upgrade price - will be available very soon!

      Get iEQ Pro MX in the App Store 

      iEQ Pro MX Demo Video 

      IEQ Pro MX in PEQ ModeIEQ Pro MX in PEQ Mode

      • March 25, 2020
  • DirkPeeters
    Contributor - Level 1

    Dear M32-users,

    By the end of a live recording via the Live-card (2x32Gb) my M32 Live "crashed" and rebooted automatically.

    System: Upgrade M32 to M32-Live, SW 4.00

    Luckily I was able to film it because for some reason I expected the "crash", the problem appeared already 5 times.

    After the reboot, I could use the mixer without problems, also start and stop recording.

    Someone else who experienced the same issue?

    sw vers.jpg

    (view in My Videos)

    Best regards,




    0 210
    • DirkPeeters

      Hi Dirk ( @DirkPeeters ), 


      Welcome to the community.  There are numerous problems with firmware 4.00 and the X-Live card that are addressed in firmware 4.01.   I'd recommend updating to that firmware and trying to reproduce the problem again. 


      Hope this helps, 


      • December 22, 2019
  • Mchesanow
    Contributor - Level 1

    Hi There!

    i just wanted to make a recommendation.  I put these feet on the non-control panel side of my monitors. The allen screws are wood screws so I added toothpicks and wood glue to the hole and voila, the feet fit perfectly.

    20191219_133241 (600x800).jpg 

    0 68
  • Struggles
    Contributor - Level 1

    Hi there, how does one set up stereo main output and mono monitors x2? (there is no full manual available). I’m hoping to use a 4 core speakon cable out of A and a splitter for the 2 main speakers - a 2 core speakon cable out in mono to x2 speakers connected in series. Is this possible







    0 131
  • bsapp22
    Contributor - Level 1

    Hey guys, updated my x32 to 4.0. For some reason I cant get the live sound going into the x32 to come into Ableton Live 10. It is the recieving the trax I'm sending to the board from Ableton. 


    Here are some pics of how i have it set.

    Live drums are coming through 17-22 and 29+30 are click and 31+32 are playback(trax previosuly recorded)

    I wasn't having this issue before the update. Let me know if ya'll kn ow what I'm doing wrong.




    0 135
    • bsapp22

      @bsapp22 wrote:


       The Expansion Card outputs Screen is the signal that you want to sent to the card (which is then sent to Ableton). Set it the same as your inputs (Local 1-8...) if that's what you want to send to your DAW.

      • November 22, 2019
  • pekner
    Triber Moderator

    Meet Christopher Olofsson, our Brand Research Software Specialist who currently works as the Project Manager for the Lake software team located in Kungsbacka Sweden. We have asked Christopher few questions about his time and experiences working at Lab.gruppen and Lake.

    Tell us about what you do at Lake?

    I currently work as the Project Manager for the Lake software team. I also do a lot of the software development and customer contact as well. We’re a tight and focused team consisting of senior developers with a lot of experience in the vast spectrum of use cases Lake is deployed for.

    How long have you been in your current position, and could you provide a brief overview of what you do?

    I have been working at Lab.gruppen and Lake since December 2014. The current project Lake XP was kicked off in February 2019 with early customer feedback on the concept as a whole. The project as such was exciting already from the start in that it required creativity in order to get our already released hardware to perform even more audio processing than before. At first, we did not know whether we could actually make it or not! To highlight some of the features Lake XP adds I would list separate FIR processing for speaker presets and speaker array optimizations and the possibility to activate a multiband limiter on each output. A great toolbox for anyone into FIR speaker preset making, for instance.

    Have you always been interested in the audio and sound business? What drew you to this industry?

    Ever since I was little I have been playing the piano and been interested in music making/audio production as a whole. But I also started out early as a hobbyist programmer. To work here is a perfect combination of two of my main interests!

    What do you like about Lab.gruppen and Lake?

    To me it’s about the quality and well-thought-out products that the brand Lab.gruppen stands for. I sometimes get in contact with people working with or otherwise interested in live audio during my spare time since I play in a band and I always feel proud to say I’m with Lab.gruppen since our amps have always been so highly ranked. But it’s also a great place to work at. Everyone here is kind to one another and you’re always included and listened to when you have ideas.

    What is your inspiration for both work and your personal projects?

    Even though I am a programmer and things tend to get very technical at times, I really try to put myself in the position of an end user and strive to make the end result as “user friendly” as possible. My main inspiration is when users express their appreciation of my work, whether it is at work or in other parts of life.

    What makes you happy at work?

    To finalize something that was first an idea and see it happen, spring to life and actually make a difference and add value. That of course in combination with a few laughs together with my colleagues whether it be to celebrate or to get over setbacks.

    What has been a lesson you’ve learned while working at Lab.gruppen and Lake?

    That “to prioritize” actually means to remove something that you won’t do, not to pick what you will do first. This is hard, since I always want it all and tend to want to squeeze in even more. I tend to get very eager.

    What is your most satisfying customer interaction?

    To solve and iron out technical details of e.g. a feature in a way that we all understand the problem and agree on all parts of the proposed solution, and the joy the energy that comes from that process gives me when thinking of how good this will become.

    What is one potentially surprising thing that people don’t know about you?

    I’m not that full of surprises, more of the opposite. One thing that some may or may not know about is the fact that I play the piano and the organ in a band, and we have been sticking together for twelve years now, performing our own original songs.





    1 565
    • pekner

      So cool to hear about working at Lake Audio! Do you think the tech under the hood will ever make its way into different formats? For instance a digital EQ that could be added via fx send to analog or digital boards that lack the high quality EQ Lake provides.

      • October 31, 2019
Go to page