• New
    Mixbus16
    Newcomer - Level 1
    2021-06-15

    Hello, I am helping someone who just got an old Midas TR console. 36 inputs 8 Goups and 8 Matrix.
    It is fitted with patchbays wired to EDAC connecors. The EDAC's look to be the 120 pin variety.
    There are 6 EDACs. Two under the bay, three under the channels, and one under the group matrix.

    Would anyone happen to have, or know what the pinout is for these?
    Or any info on what the EDACS might be wired to in the bays? Looking for a place to start figuring out what these patch points are.

    Thank you!

     




    read more...
    0 11
  • New
    AslemSantosVale
    Newcomer - Level 1
    2021-06-03

    Hi, I have this interface with the USB XMOS IC shorted. But I couldn't find the correct component code to order. Anyway, after a lot of research and help from some very supportive people, I found out that it's XMOS XS1-U8A-64FB96-C5, but it doesn't come with recorded firmware. I found a firmware on the Behringer website (picture attached) but I was wondering if I can burn the new and "virgin" IC by USB. Thanks.

    read more...
    0 8
  • New
    Midas76
    Newcomer - Level 1
    2021-05-25

    Hello, I am looking for the part number for bus send encoders for the Midas M32. Something got dropped on the encoder knobs and I would like to get a replacement. They still work but when turned they spin funky.  If I need to replace the whole section that would be great too. Can anyone tell me if these are available and price? Thank you

    read more...
    0 22
    • Midas76
      WilliamR Hello, William from musictribe here. If you could click on the support link above and open a parts ticket, someone can get the process started for you asap.
      • May 26
  • New
    Alvaro73
    Newcomer - Level 1
    2021-05-05

    Hi, my Mic Gain dual encoder from a Stereo Channel is broken, or rather the middle shaft has broken off. Attached is a picture to clarify which one I'm referring to.

    Could you let me which encoder is a suitable replacement so I can fix it? Part number? Are they Alps?

    Many thanks

     

     

     

     

     

    read more...
    0 28
    • Alvaro73
      Dale_M Hi there, I would advise going to the support tab above and selecting spares, we may still have some but the team can advise on price and availability for you.
      • May 5
  • seanmd1
    Newcomer - Level 1
    2021-03-22

    hi, I install my new brant MIDAS 32 R on my pc, I have correctly connect the USB cable and parameters as well. In cubase 11 and studio one when i want changed pilote asio to DN 32 i have the message " no device is connect to pc. It work with Windows 10 recent upgrade. I cannot work with my daw.

    Thanks you for your support . Regards Dan

     

    read more...
    0 50
    • seanmd1
      RexBeckett Hi Dan, did you install the correct driver on your PC? The DN32-USB and DN32-Live cards use different drivers. If so, try a different USB cable and/or PC USB port. If possible, use a USB 2.0 port and connect directly, not through a USB hub.
      • Mar 22
  • New
    MCG1DUMC
    Newcomer - Level 1
    2021-02-18

    Any suggestions on how to get this back up and running as soon as possible. We already had to do one last nights  service with a make shift rig.  

    0 43
    • MCG1DUMC
      Dale_M Hi Dale here do you think you can submit a support ticket (technical) from the tab above and put FAO Dale in the subject line so I can help you please?
      • Feb 22
  • New
    ecsaba
    Newcomer - Level 1
    2021-02-15

    Hello all,

     

    I have an issue with the M32 Live soundcard driver v.4.59 installation on a Windows 10 PC. All the firmwares are up to date, the operating system on the PC is up to date but I cannot manage to get the Klark Tehnik soundcard working. Please check the attached pictures about current status. 

    read more...
    0 48
    • ecsaba
      Nigel67 Hi ecsaba. It looks as though you are trying to use the DN32-USB driver instead of the DN32-LIVE driver.
      • Feb 15
    • ecsaba
      ecsaba The driver that I used is for the DN32-LIVE.
      • Feb 20
    • ecsaba
      Paul_Vannatto Are you plugged into a USB 3.0 port (blue) on the computer? If so, change to a USB 2.0 port (black). If you are already using a USB 2.0, replace the USB cable (yes they do go bad).
      • Feb 20
  • New
    nnw522
    Newcomer - Level 1
    2021-01-31

    This is my setup for our church, Crossroads Church in Victor, Montana

    2 73
    • nnw522
      GaryHiggins Nice! Welcome aboard!
      • Jan 31
      • I'm excited to become a new member!
        nnw522 Thank you
        • Jan 31
    • nnw522
      KevinMaxwell Is that M32edit stretched out over the 2 monitors? Now do you see over them to see the stage? Are you in a balcony tech area with no congregation seating behind you? And is that an EV635 plugged into the Talkback XLR?
      • Jan 31
      • I'm excited to become a new member!
        nnw522 Yes it stretched across both monitors. I'm planning on dropping the monitors down, as the stand for them is adjustable. I'm also planning on experimenting with dual touch screens at some point. Yes a balcony tech area with stage media, streaming station, and of course the audio desk. As for the mic you are correct. I need to get a proper boom mic for it at some point, but for now it works.
        • Jan 31
      • I'm excited to become a new member!
        GaryHiggins You might at some point perhaps consider:

        https://www.amazon.com/gp/product/B01E06JSI4/ref=ox_sc_act_title_1?smid=A19F97KYDWNFQQ&psc=1

        These are very nice, the touch screens work perfectly, "Helium" stand lets them fold to almost flat if you like...or nearly straight up. I have 2 and am very happy with them...and not too hard on the wallet.
        • Jan 31
    • nnw522
      MarkNorgren Welcome! Two words, "Mixing Station." A great low cost app, MHO. Have fun and enjoy!
      • Feb 1
  • New
    ropilas
    Contributor - Level 1
    2021-01-30

    Hi,

    I bought my Midas32 live last year January 2020 before Pandemic started! Do I need to update the firmware now? If so where I can get the firmware new versions and what version right now?

    Thanks

    Ronnie

    0 49
  • New
    TurdFerguson19
    Newcomer - Level 1
    2021-01-24

    Hi everyone, I'm new to the forum but not to Midas, I have recently purchased a pristine Venice F32. The only issue is my channel #4 fader is missing ? at least the knob plus the slider, the body is still on the circuit board. Can someone point me in the right direction for a replacement fader plus the knob? 

    read more...
    0 55
    • TurdFerguson19
      Nigel67 Hi, please click on the support tab at the top of the page. In the new page that opens, scroll down, click on the spare parts tab and submit a ticket. One of my colleagues will then get back to you with pricing and availability. many thanks
      • Jan 24
Go to page